• 한국수소및신에너지학회논문집
• /
• 제29권3호
• /
• pp.299-305
• /
• 2018

The domestic label fuel economy measurement method is the same as the North American measurement method. The results of two test modes (city [FTP-75 mode], highway [HWFET mode]) are calculated to be equivalent to the final fuel economy value calculated as the result of five test modes reflecting various environmental conditions and driving patterns 5-cycle correction formula is used. In this study, we tried to find out that the difference between the domestic label fuel economy of the vehicle and the real road fuel economy felt by the driver compared to the new vehicle condition as the mileage increases. Using domestic label fuel economy measurement method, Four gasoline vehicles and four diesel vehicles were tested for the fuel economy of a new vehicle with a mileage of 150 km or less and domestic fuel economy test $6,500{\pm}1,000km$ durability condition and 15,000 km durability. It is confirmed that the certain portion (6,500 km endurance vehicle) The increase in mileage did not affect the fuel economy or the emission gas significantly, indicating that vehicle durability was limited.

• 대한기계학회논문집B
• /
• 제36권4호
• /
• pp.371-376
• /
• 2012

본 연구에서는 대형버스 배기가스 테스트 모드인 JE-05 에서 DME와 디젤을 연료로 사용하는 대형 DME버스를 차대동력계, 배기가스 분석기 그리고 PM 측정시스템을 이용하여 대형 DME버스의 연비, 배기가 스특성 그리고 동적 특성에 대해 알아보았다. 대형 DME버스에는 6기통 8,071cc 디젤엔진이 장착되었으며, 현재 운행되고 있는 상용 디젤버스와는 달리 DOC, DPF와 같은 후처리 장치가 없다. 실험 결과, 각 부하에 따른 차량의 속도를 통하여 차량의 동적 특성은 DME와 디젤을 사용했을 때 거의 비슷한 것을 알 수 있었다. NOx, CO와 THC는 DME를 연료로 사용 시 디젤연료에 비해 더 적게 배출되는 것을 확인하였다. 하지만 PM은 DME연료를 사용 시 거의 발생하지 않았는데, 이는 DME가 함산소연료이고 분자구조상 탄소-탄소 결합이 없기 때문이라고 생각된다. $CO_2$는 각 연료 사용 시 비슷하게 발생하였으며, 저위발열량 베이스로 계산된 연비는 DME연료 사용 시 디젤연료보다 약 6.7% 더 낮게 나왔다.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.74-80
• /
• 2009

The objective of this paper was to investigate the slip rate and the slip frequency number of damper clutch of torque converter in 2.4L passenger vehicle with 5-speed A/T and analyze the effect of slip control and control strategy on driving characteristics and the fuel economy. The newly developed torque converter with the more durable wet friction material and the slip-controlled damper clutch system, the DCC system, was installed, which was easily compatible and amendable of the lock-up clutch of the base system. The vehicle has been tested on the fuel economy modes such as FTP-75, HWFET and NEDC (ECE15+EUDC) driving cycle at chassis dynamometer. The DCC mode (II), of which the control strategy had both the lock-up and the slip-controlled clutch, and the DCC mode (I) with full slip-controlled clutch were compared with the base system with only the lock-up clutch. As the research result, comparison to base system, the fuel consumption of the vehicle with the DCC control (II) was effectively improved by 6.6% and 7.7% on FTP-75 and NEDC mode.

• Tribology and Lubricants
• /
• 제26권5호
• /
• pp.291-296
• /
• 2010

The purpose of this paper is to study the fuel economy improvement experimentally when the viscosity of engine oil is lowered. The emissions are measured for CVS-75 mode with SAE viscosity grades. The test results indicate that a close correlation has been found between the engine oil viscosity and the fuel economy. The lowering of engine oil viscosity causes the reduction of friction loss which has a very close relation with the fuel economy. These results as the lowering of engine oil viscosity will be a important factor for improvement of the fuel economy and reduction of the $CO_2$ emission.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.19-23
• /
• 2009

This paper focuses on vehicle fuel economy improvement using D-Range neutral control of automatic transmission. The system objected to reducing of fuel consumption during idle. Usually, turbine of conventional auto transmission is mechanically linked to wheel during idling condition. Therefore speed ratio of torque converter is zero for that period. This causes needless power loss by the torque converter slip. To improve this inefficiency automobile makers develops electronically-controlled D-range neutral control system. The D-range neutral control system minimizes slip on the torque converter by shifting gear to a neutral position during vehicle stoped with D-range gear position. However there's insufficient study about the effect of D-range neutral control system on vehicle fuel economy. In this paper, researches are performed on effect of D-range neutral control system on vehicle fuel economy by experiment with two different vehicle. And it is also estimated the effect on vehicle fuel economy using computer simulation. As a result, 1.8% of LA-4 mode fuel economy improvement can be achieved in a vehicle by D-range neutral control system.

• 융복합기술연구소 논문집
• /
• 제4권2호
• /
• pp.67-70
• /
• 2014

Recently EU has been recognized that there is a difference of emission quantity between emission certification test mode and real-road driving test. Accordingly the European Commission is currently preparing to require real-road testing as part of the passenger car type-approval process in the EU. vehicle manufacturers from 2017 are expected to test new vehicles not only under laboratory conditions but also on the real-road, using PEMS equipment. Therefore the purpose of this study is to analyze the emission and Fuel Economy of CVS-75 mode test using chassis dynamometer and RDE test using PEMS equipment by PHEV passenger car.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.485-489
• /
• 2007

Knowledge-based economy is the economy or economic structure based on production, accumulation and utilization of knowledge. With the emergence of knowledge-based economy, the importance to the corporate competitiveness of IP and IP-related activities has increased. This paper discuss the issues related to the mode of IP-related activities, including the comparison of SMEs and large firms. Especially, I focus on the role and impact of IP-related activities on innovation and growth of firm in machinery industry. The result of this study can help to set up strategy for supporting firm's technology innovation.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.81-87
• /
• 2015

디젤 엔진에서 저압 배기재순환 시스템의 적용을 통한 질소산화물 저감과 연비 향상에 관한 효과를 확인하였다. 엔진의 정상 상태 및 과도 상태에서 시험이 진행되었으며, 차량상사를 통한 NEDC 모드 테스트를 위하여 별도의 제어로직도 개발되었다. 정상 상태의 시험결과에서 저압 배기재순환 시스템은 고압 배기재순환 시스템에 비하여 질소산화물 저감 및 연비 향상에 유리함을 확인하였고, NEDC 모드 테스트 결과로부터 배출가스의 증가없이 연비를 향상시킬 수 있는 것으로 나타났다.

• 에너지공학
• /
• 제25권4호
• /
• pp.159-169
• /
• 2016

본 연구에서는 함산소기재 중 MTBE를 휘발유에 첨가하여 산소함량(0, 1.0, 2.3 및 2.7 wt %)의 변화에 따라 MPI 및 GDi 차량에서 배출되는 유해한 배출가스와 연비를 분석하였다. 국내 및 미국의 연비시험방법인 FTP-75 mode와 HWFET mode를 적용하였다. CO, NMHC, NOx 배출량은 산소함량의 변화에 따라 미미한 차이는 있었지만 상관관계는 없었다. FTP-75 mode에서 CO2 배출량은 산소함량의 변화에 따라 증감의 경향성은 없었다. 하지만 차량이 예열된 상태이고 고속 운전영역이 포함된 FTP-75 mode의 phase-3와 HWFET mode에서는 산소를 함유한 연료의 CO2 배출량이 적었다. 입자개수 배출량은 산소함량과 음의 상관관계를 보였으며 산소함량 2.3 wt %에서 가장 적었다. 카본발란스법에 의해 계산된 연비는 산소를 함유한 연료가 높았으며 2.3 wt %에서 가장 높았다.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.90-98
• /
• 2005

HMT is a type of continuously variable transmission which has split power flow path characteristics with gear train and hydro static unit. The benefit of improved fuel economy and high power capacity enables it to be a promising application fur large vehicles. This paper presents the analysis results including velocity, static torque, transmission efficiency and dynamic model of the HMT that is developed for city buses. The speeds or gear shafts, the static clutch torque and split power ratio for each mode are detailed here. From the analysis of HMT transmission efficiency considering the power loss in meshed gear and hydraulic unit, we can conclude that minimization of hydraulic power is necessary for improved fuel economy design. Also, the dynamic simulation result for mode shift characteristics shows that little shift shock is observed because of the synchronized rotation speed in clutch.