• Korean Journal of Microbiology
• /
• v.53 no.2
• /
• pp.83-96
• /
• 2017

A constructed sea stream in Yeongdo, Busan, Republic of Korea is mostly static due to the lifted stream bed and tidal characters, and receives domestic wastewater nearby, causing a consistent odor production and water quality degradation. Bioaugmentation of a microbial consortium was proposed as an effective and economical restoration technology to restore the polluted stream. The microbial consortium activated on site was augmented on a periodic basis (7~10 days) into the most polluted site (Site 2) which was chosen considering the pollution level and tidal movement. Physicochemical parameters of water qualities were monitored including pH, temperature, DO, ORP, SS, COD, T-N, and T-P. COD and microbial community analyses of the sediments were also performed. A significant reduction in SS, COD, T-N, and COD (sediment) at Site 2 occurred showing their removal rates 51%, 58% and 27% and 35%, respectively, in 13 months while T-P increased by 47%. In most of the test sites, population densities of sulfate reducing bacterial (SRB) groups (Desulfobacteraceae_uc_s, Desulfobacterales_uc_s, Desulfuromonadaceae_uc_s, Desulfuromonas_g1_uc, and Desulfobacter postgatei) and Anaerolinaeles was observed to generally decrease after the bioaugmentation while those of Gamma-proteobacteria (NOR5-6B_s and NOR5-6A_s), Bacteroidales_uc_s, and Flavobacteriales_uc_s appeared to generally increase. Aerobic microbial communities (Flavobacteriaceae_uc_s) were dominant in St. 4 that showed the highest level of DO and least level of COD. These microbial communities could be used as an indicator organism to monitor the restoration process. The alpha diversity indices (OTUs, Chao1, and Shannon) of microbial communities generally decreased after the augmentation. Fast uniFrac analysis of all the samples of different sites and dates showed that there was a similarity in the microbial community structures regardless of samples as the augmentation advanced in comparison with before- and early bioaugmentation event, indicating occurrence of changing of the indigenous microbial community structures. It was concluded that the bioaugmentation could improve the polluted water quality and simultaneously change the microbial community structures via their niche changes. This in situ remediation technology will contribute to an eco-friendly and economically cleaning up of polluted streams of brine water and freshwater.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.607-616
• /
• 2013

Light with two faces, beneficial and harmful effects is an important signal for every living cell. Optimal adaptation to light environment enhances the fitness of an organism and survival in nature. Understandings of light quality and plant growth provide with the economical guides for artificial light sources like LEDs. Compared with those under white light, the 1 week seedlings of Chinese cabbage (Brassica rapa) under monochromic red and blue light showed normal development and growth. In contrast to extremely long and etiolated hypocotyls of the seedlings under dark, those under far-red etiolated were extremely short. Based on the microarray analysis, blue light induced the vigorous development and growth and two fold changes of transcripts than red light condition. To have insight of gene products under different light qualities conditions, GO term enrichments were calculated and each gene according to their GO terms were categorized. The blue and red lights affected the expressions of genes related to biological process. Especially, the genes related to metabolic process and developmental process and plastid and chloroplast in the cellular component category were induced under blue light. This study provided the molecular biological evidence for various light qualities on the growing process of B. rapa.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.351-358
• /
• 2021

The study was investigated to compare growth characteristics, the antioxidant activity, and the triterpenoid content of two Centella asiatica cultivars ('Giant Tiger Care' and 'Good Tiger Care'). At 41 days after transplanting, lengths of leaf and petiole were significantly longer in 'Good Tiger Care' than in 'Giant Tiger Care'. However, the growth characteristics (leaf area, petiole thickness, petiole length, and weight) were greater in 'Giant Tiger Care' than in 'Good Tiger Care' at 104 days after transplanting (harvest time). Antioxidant activity and total phenol content in four extracts (WE, water extract; HWE, hot water extract; 50E, 50% EtOH extract; 70E, 70% EtOH extract) of the two cultivars were high in 70E of 'Giant Tiger Care'. As a result of the triterpenoids analysis, the major triterpenoids of the two cultivars were identified as madecassoside and asiaticoside. The total triterpenoid content was high in 50E and 70E of 'Giant Tiger Care' and 'Good Tiger Care', respectively but the total triterpenoid content was highest in Good Tiger Care'. However, at the 104 days after planting, the yield of 'Giant Tiger Care' was three times higher than that of 'Good Tiger Care'. In addition, the total triterpenoid content that can be produced in the same cultivation area (3.3m²) was 2.459mg in 50E of 'Giant Tiger Care', which was ~2.2times higher than that of 70E of 'Good Tiger Care' (1.103 mg). Thus, it is considered economical to cultivate 'Giant Tiger Care' which has the highest antioxidant activity and high total triterpenoid production per cultivation area.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.1
• /
• pp.187-198
• /
• 2019

The purpose of this study is to seek ways of utilizing TLBMC by understanding business model of social ventures that are accompanied by social and environmental as well as economic missions. In order to achieve this, business models from economic, environmental and social perspectives will be analyzed, and we seek to enhance sustainability of social venture entrepreneurs. As the analysis tool, TLBMC(Triple Layered Business Model Canvas) expands upon the business model canvas that is widely utilized and recognizes economical terms. The TLBMC is proposed by Joyce, A., & Paquin, R. L.(2016) to help achieve a holistic view with horizontal and vertical associations. The study tries to overcome limitations of previous studies and observe a variety of economic, environmental, and social perspectives that social ventures should have with the TLBMC. As a result, it has the following implications; Firstly, creating separate social, environmental and economic business model canvas helps a business to have a holistic approach. Secondly, it was found that social venture characteristics of environmental and social perspectives were applied in practice. Lastly, we have established experience data on social venture business model. This study focuses on the opinions, the meanings and the subjective views of the participants. As a result, conclusions are drawn by the researchers ' assertions and has limitations as a research on case studies. However, this study will help people who are preparing or studying social ventures to have economic, environmental, and social perspectives. Also, redefinition of the direction and value of entrepreneurs operating social ventures, such as vision and mission, will help clarify the roles and responsibility of organizations. As a fundamental step for future empirical studies, this study could be the base for social venture business model studies.

• (The) Korean Journal of Advertising
• /
• v.27 no.8
• /
• pp.59-90
• /
• 2016

Consumers demand that corporates fulfill their social responsibility by exerting influence over not only economical values but also social values in markets. Given such a social mood, most corporates are actively engaging in Corporate Social Responsibility(CSR) activities, and marketing scholars continue to study the effects of such CSR activities. Numerous such studies examined the relationship between CSR activity and brand equity. Moreover, virtually, a majority of these studies focused on consumer responses to CSR activity from an individual brand perspective. In a situation in which brand management must consider the spillover effects of brands, firms holding various brands should consider these spillover effects when they establish CSR activity strategies. Therefore, we examine the effects of CSR activity using a comprehensive approach that considers the hierarchy of brands. Additionally, we develop a new perspective on fit that has been used as a major influence on the effects of CSR activity. We argue that the mixed results of the impact of fit regarding the effect of CSR activities is attributed to the influence of connections among brands based on the hierarchy of brands. We then examine the effect of two types of CSR activity strategies that reflect the relativity of fit. The results reveal that there was no difference in impact of the two strategies based on unique roles and traits of corporate brand and effects of low fit. Also, we found that the corporate brand focused strategy creates a greater change in consumers' attitudes than does an individual brand focused strategy in the case of a particular brand. This finding is meaningful because it indicates that a hierarchy of brands may relatively reduce the impact of the role of fit, unlike general arguments from previous related research. Second, the spillover effects from the CSR activities of individual sub-brands belonging to the same corporate brand were confirmed. Therefore, we clearly verified the role of the hierarchy of brands. Although both strategies cause changes in consumer attitude toward brands engaged in CSR activity, overall, a corporate brand focused strategy turned out to be more effective than an individual brand focused strategy because of the spillover effects of brands. Third, this study verified the effect of a corporate brand focused strategy through a moderating effect analysis of the degree of association between individual brands and corporate brand. Given these results, we identified a moderating role in the degree of association and the changes in consumer attitudes toward both main brands engaged in CSR activities and other different individual brands, which were caused by the spillover effects of brands. Finally, this study addresses implications and limitations.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.689-698
• /
• 2021

Since the mine reclamation scheme was implemented from 2007 in Korea, various remediation programs have been decontaminated the pollution associated with mining and 254 mines were managed to reclamation from 2011 to 2015. However, as the total amount of contaminated mine drainage has been increased due to the discovery of potential hazards and contaminated zone, more efficient and economical treatment technology is required. Therefore, in this study, the adsorption properties of arsenic was evaluated according to the adsorbents which were derived from water treatment sludge(Alum based adsorbent, ABA-500) and granular ferric hydroxide(GFH), already commercialized. The alum sludge and GFH adsorbents consisted of aluminum, silica materials and amorphous iron hydroxide, respectively. The point of zero charge of ABA-500 and GFH were 5.27 and 6.72, respectively. The result of the analysis of BET revealed that the specific surface area of GFH(257 m²·g^-1) was larger than ABA-500(126~136 m²·g^-1) and all the adsorbents were mesoporous materials inferred from N₂ adsorption-desorption isotherm. The adsorption capacity of adsorbents was compared with the batch experiments that were performed at different reaction times, pH, temperature and initial concentrations of arsenic. As a result of kinetic study, it was confirmed that arsenic was adsorbed rapidly in the order of GFH, ABA-500(granule) and ABA-500(3mm). The adsorption kinetics were fitted to the pseudo-second-order kinetic model for all three adsorbents. The amount of adsorbed arsenic was increased with low pH and high temperature regardless of adsorbents. When the adsorbents reacted at different initial concentrations of arsenic in an hour, ABA-500(granule) and GFH could remove the arsenic below the standard of drinking water if the concentration was below 0.2 mg·g^-1 and 1 mg·g^-1, respectively. The results suggested that the ABA-500(granule), a low-cost adsorbent, had the potential to field application at low contaminated mine drainage.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.174-182
• /
• 2020

The permissible limit of ammonia concentration in drinking water recommended by the World Health Organization (WHO) is 1.5 mg/L. However, in the case of groundwater in Kathmandu, Nepal, the concentration of ammonia fluctuates dramatically from 0 to 120 mg/L at different locations and groundwater depths (Chapagain et al., 2010). Such a high concentration of ammonia causes aesthetic problems in drinking water, such as bad taste and odor; hence, prior treatment is required. In Kathmandu, half of the population utilizes groundwater, which is also employed for drinking water, but owing to a lack of knowledge of household water filters, residents of Kathmandu tend to depend greatly on commercially available jar water than on the installation of a proper household filtration method. Thus, in our study, we employed adsorption and reverse osmosis (RO) as two of the most viable decentralized/household treatment options to address the issue of high contamination of ammonia in drinking water. We evaluated their performances from technical and the economic perspectives using synthetically prepared groundwater at varying ammonia concentrations (50 mg/L and 15 mg/L). Consequently, it was found that adsorption via ion exchange (IE) resin was a comparatively better ammonia removal technology than RO, with 100% ammonia removal even after regeneration; the removal by RO was limited to up to 90%. Furthermore, our study suggests that IE is the most suitable ammonia removal technology for places with lower water consumption (< 50 L/day), whereas RO seemed to be a cost-effective technology for places with higher water consumption, where the daily water demand exceeds 50 L/day. Lastly, these assessments suggest that installing a suitable household treatment system would be more efficient and sustainable from both technical and economic points of view than purchasing commercially bottled water.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.345-358
• /
• 2021

This study focuses on the development of the liquid air production process that uses LNG (liquefied natural gas) cold energy which usually wasted during the regasification stage. The liquid air can be transported to the LNG exporter, and it can be utilized as the cold source to replace certain amount of refrigerant for the natural gas liquefaction. Therefore, the condition of the liquid air has to satisfy the available pressure of LNG storage tank. To satisfy pressure constraint of the membrane type LNG tank, proposed process is designed to produce liquid air at 1.3bar. In proposed process, the air is precooled by heat exchange with LNG and subcooled by nitrogen refrigeration cycle. When the amount of transported liquid air is as large as the capacity of the LNG carrier, it could be economical in terms of the transportation cost. In addition, larger liquid air can give more cold energy that can be used in natural gas liquefaction plant. To analyze the effect of the liquid air production amount, under the same LNG supply condition, the proposed process is simulated under 3 different air flow rate: 0.50 kg/s, 0.75 kg/s, 1.00 kg/s, correspond to Case1, Case2, and Case3, respectively. Each case was analyzed thermodynamically and economically. It shows a tendency that the more liquid air production, the more energy demanded per same mass of product as Case3 is 0.18kWh higher than Base case. In consequence the production cost per 1 kg liquid air in Case3 was $0.0172 higher. However, as liquid air production increases, the transportation cost per 1 kg liquid air has reduced by $0.0395. In terms of overall cost, Case 3 confirmed that liquid air can be produced and transported with $0.0223 less per kilogram than Base case.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.49-62
• /
• 2022

The hollow modular concrete block reinforced foundation method is one of the ground reinforcement foundation methods that uses hexagonal honeycomb-shaped concrete blocks with mixed crushed rock to reinforce soft grounds. It then forms an artificial layered ground that increases bearing capacity and reduces settlement. The hollow modular honeycomb-shaped concrete block is a geometrically economical, stable structure that distributes forces in a balanced way. However, the behavioral characteristics of hollow modular concrete block reinforced foundations are not yet fully understood. In this study, a bearing capacity test is performed to analyze the reinforcement effectiveness of the hollow modular concrete block through the laboratory model tests. From the load-settlement curve, punching shear failure occurs under the unfilled sand condition (A-1-N). However, the filled sand condition (A-1-F) shows a linear curve without yielding, confirming the reinforcement effect is three times higher than that of unreinforced ground. The bearing capacity equation is proposed for the parts that have contact pressure under concrete, vertical stress of hollow blocks, and the inner skin friction force from horizontal stress by confining effect based on the schematic diagram of confining effect inside a hollow modular concrete block. As a result of calculating the bearing capacity, the percentage of load distribution for contact force on the area of concrete is about 65%, vertical force on the area of hollow is 16.5% and inner skin friction force of area of the inner wall is about 18.5%. When the surcharge load is applied to the concrete part, the vertical stress occurs on the area of the hollow part by confining effect first. Then, in the filled sand in the hollow where the horizontal direction is constrained, the inner skin friction force occurs by the horizontal stress on the inner wall of the hollow modular concrete block. The inner skin friction force suppresses the punching of the concrete part and reduces contact pressure.

• Clean Technology
• /
• v.28 no.3
• /
• pp.218-226
• /
• 2022

As a result of the recent social transformation towards a hydrogen economy and carbon-neutrality, the demands for hydrogen energy have been increasing rapidly worldwide. As such, eco-friendly hydrogen production technologies that do not produce carbon dioxide (CO₂) emissions are being focused on. Among them, ammonia (NH₃) is an economical hydrogen carrier that can easily produce hydrogen (H₂). In this study, Ru/Al₂O₃ catalyst coated onmetallic monolith for hydrogen production from ammonia was prepared by a dip-coating method using a catalyst slurry mixture composed of Ru/Al₂O₃ catalyst, inorganic binder (alumina sol) and organic binder (methyl cellulose). At the optimized 1:1:0.1 weight ratio of catalyst/inorganic binder/organic binder, the amount of catalyst coated on the metallic monolith after one cycle coating was about 61.6 g L^-1. The uniform thickness (about 42 ㎛) and crystal structure of the catalyst coated on the metallic monolith surface were confirmed through scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. Also, a numerical optimization regression equation for NH3 conversion according to the independent variables of reaction temperature (400-600 ℃) and gas hourly space velocity (1,000-5,000 h^-1) was calculated by response surface methodology (RSM). This model indicated a determination coefficient (R²) of 0.991 and had statistically significant predictors. This regression model could contribute to the commercial process design of hydrogen production by ammonia decomposition.