• Nuclear Engineering and Technology
• /
• v.40 no.1
• /
• pp.49-68
• /
• 2008

The purpose of this paper is to extensively review the condition monitoring (CM) techniques using empirical models in an effort to reduce or eliminate unexpected downtimes in general industry, and to illustrate the feasibility of applying them to the nuclear industry. CM provides on-time warnings of system states to enable the optimal scheduling of maintenance and, ultimately, plant uptime is maximized. Currently, most maintenance processes tend to be either reactive, or part of scheduled, or preventive maintenance. Such maintenance is being increasingly reported as a poor practice for two reasons: first, the component does not necessarily require maintenance, thus the maintenance cost is wasted, and secondly, failure catalysts are introduced into properly working components, which is worse. This paper first summarizes the technical aspects of CM including state estimation and state monitoring. The mathematical background of CM is mature enough even for commercial use in the nuclear industry. Considering the current computational capabilities of CM, its application is not limited by technical difficulties, but by a lack of desire on the part of industry to implement it. For practical applications in the nuclear industry, it may be more important to clarify and quantify the negative impact of unexpected outcomes or failures in CM than it is to investigate its advantages. In other words, while issues regarding accuracy have been targeted to date, the concerns regarding robustness should now be concentrated on. Standardizing the anticipated failures and the possibly harsh operating conditions, and then evaluating the impact of the proposed CM under those conditions may be necessary. In order to make the CM techniques practical for the nuclear industry in the future, it is recommended that a prototype CM system be applied to a secondary system in which most of the components are non-safety grade. Recently, many activities to enhance the safety and efficiency of the secondary system have been encouraged. With the application of CM to nuclear power plants, it is expected to increase profit while addressing safety and economic issues.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.3
• /
• pp.341-349
• /
• 2019

Objective: Internal organs indirectly affect economic performance and well-being of animals. Study of internal organs during later layer period will allow full utilization of layer hens. Hence, we conducted a genome-wide association study (GWAS) to identify potential quantitative trait loci or genes that potentially contribute to internal organ weight. Methods: A total of 1,512 chickens originating from White Leghorn and Dongxiang Blue-Shelled chickens were genotyped using high-density Affymetrix 600 K single nucleotide polymorphism (SNP) array. We conducted a GWAS, linkage disequilibrium analysis, and heritability estimated based on SNP information by using GEMMA, Haploview and GCTA software. Results: Our results displayed that internal organ weights show moderate to high (0.283 to 0.640) heritability. Variance partitioned across chromosomes and chromosome lengths had a linear relationship for liver weight and gizzard weight ($R^2=0.493$, 0.753). A total of 23 highly significant SNPs that associated with all internal organ weights were mainly located on Gallus gallus autosome (GGA) 1 and GGA4. Six SNPs on GGA2 affected heart weight. After the final analysis, five top SNPs were in or near genes 5-Hydroxytryptamine receptor 2A, general transcription factor IIF polypeptide 2, WD repeat and FYVE domain containing 2, non-SMC condensin I complex subunit G, and sonic hedgehog, which were considered as candidate genes having a pervasive role in internal organ weights. Conclusion: Our findings provide an understanding of the underlying genetic architecture of internal organs and are beneficial in the selection of chickens.

• Journal of Veterinary Science
• /
• v.19 no.6
• /
• pp.759-770
• /
• 2018

Fowl adenovirus (FAdV) is distributed worldwide and causes economic losses in the poultry industry. The objectives of this study were to determine the hexon and fiber gene changes in an attenuated FAdV isolate from Malaysia in specific pathogen-free chicken embryonated eggs (SPF CEE) and its infectivity in commercial broiler chickens. SPF CEE were inoculated with 0.1 mL FAdV inoculum via the chorioallantoic membrane (CAM) for 20 consecutive passages. The isolate at passage 20 (E20), with a virus titer of $10^{8.7}TCID_{50}/mL$ ($TCID_{50}$, 50% tissue culture infective dose), was inoculated (0.5 mL) into one-day-old commercial broiler chicks either via oral or intraperitoneal routes. The study demonstrated that 100% embryonic mortality was recorded from E2 to E20 with a delayed pattern at E17 onwards. The lesions were confined to the liver and CAM. Substitutions of amino acids in the L1 loop of hexon at positions 49 and 66, and in the knob of fiber at positions 318 and 322 were recorded in the E20 isolate. The isolate belongs to serotype 8b and is non-pathogenic to broiler chickens, but it is able to induce a FAdV antibody titer. It appears that molecular changes in the L1 loop of hexon and the knob of fiber are markers for FAdV infectivity.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.2
• /
• pp.1-9
• /
• 2020

Large-scale industrial facility structures continue to deteriorate due to the effects of operating and environmental conditions. The problems of these industrial facilities are potentially causing economic losses, environmental pollution, casualties, and national losses. Accordingly, in order to prevent disaster accidents of large structures in advance, the necessity of diagnosing structures using non-destructive inspection techniques is being highlighted. The defect occurrence, location and defect type of the structure are important parameters for predicting the remaining life of the structure, so continuous defect observation is very important. Recently, many researchers have been actively researching real-time monitoring technology to solve these problems. Structure Health Monitoring Inspection is a technology that can identify and respond to the occurrence of defects in real time, but there is a limit to check the degree of defects and the direction of growth of defects. In order to compensate for the shortcomings of these technologies, the importance of defect imaging techniques is emerging, and in order to find defects in large structures, a method of inspecting a wide range using guided ultrasonic is effective. The work presented here introduces a calculation for the shape factor for evaluation of the damaged area, as well as a variable β parameter technique to correct a damaged shape. Also, we perform research in modeling simulation and an experiment for comparison with a suggested inspection method and verify its validity. The curved structure image obtained by the advanced RAPID algorithm showed a good match between the defect area and the shape.

• Korean Journal of Social Welfare Studies
• /
• v.43 no.2
• /
• pp.295-317
• /
• 2012

Corporate interest and participation to the corporate philanthropy have increased since sustainable business management and win-win business management is on the rise to be the major task of the corporation, due to global economic recession and shrinking of consumption market. Employee participating corporate philanthropy, such as giving or volunteering, are especially increasing recently. This study analyzed the effects of giving and volunteering participation of the employees on job satisfaction and organizational citizenship behavior mediated by recognition and attitude about corporate philanthropy. Structural equation modeling was employed for statistical analyses. As a result of the study, it is clear that giving participation of the employees has a positive influence in job satisfaction and organizational citizenship behavior, mediated by the recognition and attitude about corporate philanthropy. However, the effects of volunteering participation of the employees on job satisfaction and organizational citizenship behavior mediated by recognition and attitude about corporate philanthropy was non-significant. Based on this result from the study, factors to increase the inner stakeholder effect of employee participating corporate philanthropy are proposed.

• ALGAE
• /
• v.39 no.1
• /
• pp.17-30
• /
• 2024

Red macroalga Pyropia yezoensis is a high valuable cultivated marine crop. Its acclimation to cold stress is especially important for long cultivation period across winter in coasts of warm temperate zone in East Asia. In this study, the response of P. yezoensis thalli to low temperature was analyzed on physiology and transcriptome level, to explore its acclimation mechanism to cold stress. The results showed that the practical photosynthesis activity (indicated by Φ_PSII and qP) was depressed and pigment allophycocyanin content was decreased during the cold stress of 48 h. However, the F_v/F_m and non-photochemical quenching increased significantly after 24 h, and the average growth rate of thalli also rebounded from 24 to 48 h, indicating a certain extent of acclimation to cold stress. On transcriptionally, the low temperature promoted the expression of differentially expressed genes (DEGs) related to carbohydrate metabolism and energy metabolism, while genes related to photosynthetic system were depressed. The increased expression of DEGs involved in ribosomal biogenesis and lipid metabolism which could accelerate protein synthesis and enhance the degree of fatty acid unsaturation, might help P. yezoensis thallus cells to cope with cold stress. Further co-expression network analysis revealed differential expression trends along with stress time, and corresponding hub genes play important roles in the systemic acquired acclimation to cold stress. This study provides basic mechanisms of P. yezoensis acclimation to cold temperature and may aid in exploration of functional genes for genetic breeding of economic macroalgae.

• Journal of agricultural medicine and community health
• /
• v.33 no.2
• /
• pp.243-254
• /
• 2008

Abstract - Objective: The purpose of this study was to examine smoking status and the relates factors in the rural elderly. Methods: This study was conducted with 2,421 elderly people(male 1,273 and female 1,148) residing in the selected 25 villages, and face-to-face interviews with the subjects were made from January 1 through March 30, 2002. Results: The average age of the male subjects was 72.7 and that of the female subjects 72.8. The investigation of smoking states showed that for male subjects, smokers accounted for 49.4%, nonsmokers 26.9%, and abstainers from smoking 23.7% and that for female subjects, smokers accounted for 18.3%, nonsmokers 75.4%, and abstainers from smoking 6.3%. The level of ?low ADL? was significantly higher in abstainers. In men, smoking rate had higher in alone, non-job, queerstreet, 「high ADL」. In women, smoking rate had higher in younger age, queerstreet, unhealthy, 「high ADL」. Conclusions: The smoking rate of the elderly was relatively high, especially at abstainers. The smoking status of elderly was correlated with age, family type, job, economic status by self-assessment, Self-recognition of health status, ADL level.

• International Commerce and Information Review
• /
• v.5 no.2
• /
• pp.19-45
• /
• 2003

The main issues addressed in this paper are as follows : First, this paper makes a distinction among types of e-money, IC card type versus Network type, open-loop type versus closed-loop type, online type versus offline type and accountable type versus unaccountable type, and analysis the clear and accurate criterion. Second, generally speaking, e-money is a claim on originator of e-money and not legal tender, so, delivery of e-money by itself does not relieve of monetary obligation. Between it is not easy to define e-money, by now there are many definitions of e-money, there is a legal uncertainty accordingly and then it is not easy to find proper law applicable to resolve a particular issue. As a result. many problems relating to e-money would be solved through analogical application of the moot proper law among the laws that apply to the cash, check, credit card, or fund transfer after analyzing type of e-money at issue. This paper studies the methods on diffusion of the utilization of electronic money. To diffuse the usage of electronic money, it need; prerequisitely as a basic conditions independence of electronic money, non-reusability, and anonymity. And also as a additional conditions it need; usability in the offline commerce, transferability, divisibility. And now electronic money is used very actively, but still has many Jaw problems such as protections of consumer, law enforcement, supervisory, etc. So electronic money has called as money, but it is sure that electronic money is not a legal tender. So to facilitate the economic function of the electronic monel it is need to supplement the electronic money in the legal sides.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.5
• /
• pp.213-218
• /
• 2002

In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.

• Journal of Labour Economics
• /
• v.29 no.1
• /
• pp.75-98
• /
• 2006

This study shows a theoretical model, based on transaction cost theory, for the choice of alternative work arrangement, Suppose that standard labor contract (permanent and full-time) is a typical labor contract of within-organization transaction and alternative labor contracts of variety are in the spectrum between market and within-organization transaction, the type and size of the market transaction cost for a specific labor would determine the appropriate labor contract. Firm-specificity and level of skill, scope and uncertainty of tasks, and duration of contract are the major determinants of transaction cost which, in turn, determines the type of labor contract. This theoretical model implies that there will be occupational segregation between standard and alternative work arrangements and that the legal regulations for protecting employment and wage of non-standard workers might not be so effective as expected.