Browse > Article
http://dx.doi.org/10.20466/KPVP.2020.16.2.001

Tomographic Imaging for Structural Health Monitoring Inspection of Containment Liner Plates using Guided Ultrasonic  

Park, Junpil (부산대학교 원자력안전 및 방재연구소)
Cho, Younho (부산대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Pressure Vessels and Piping / v.16, no.2, 2020 , pp. 1-9 More about this Journal
Abstract
Large-scale industrial facility structures continue to deteriorate due to the effects of operating and environmental conditions. The problems of these industrial facilities are potentially causing economic losses, environmental pollution, casualties, and national losses. Accordingly, in order to prevent disaster accidents of large structures in advance, the necessity of diagnosing structures using non-destructive inspection techniques is being highlighted. The defect occurrence, location and defect type of the structure are important parameters for predicting the remaining life of the structure, so continuous defect observation is very important. Recently, many researchers have been actively researching real-time monitoring technology to solve these problems. Structure Health Monitoring Inspection is a technology that can identify and respond to the occurrence of defects in real time, but there is a limit to check the degree of defects and the direction of growth of defects. In order to compensate for the shortcomings of these technologies, the importance of defect imaging techniques is emerging, and in order to find defects in large structures, a method of inspecting a wide range using guided ultrasonic is effective. The work presented here introduces a calculation for the shape factor for evaluation of the damaged area, as well as a variable β parameter technique to correct a damaged shape. Also, we perform research in modeling simulation and an experiment for comparison with a suggested inspection method and verify its validity. The curved structure image obtained by the advanced RAPID algorithm showed a good match between the defect area and the shape.
Keywords
CLP; Curved Structure; Guided Ultrasonic; Tomography; Defect Imaging;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Elsersy, Mohamed, 2016, "Performance evaluation of experimental damage detection in structure health monitoring using acceleration," Wireless Communications and Mobile Computing Conference, Paphos, Sept. 5-9, pp. 529-534. doi:https//doi.org/10.1109/IWCMC/2016.7577113
2 Salaoru, T. A., Toader, A., Arghir, M., Andrei, M., Tudose, M., Popescu, I., Donciu, C., 2014, "Lamb Waves Tunning on Aluminium Plates for Structure Health Monitoring," INCAS BULLETIN, Vol. 6, No. 1, pp:73-81. doi:https//doi.org/10.13111/2066-8201.2014.6.1.7   DOI
3 Wessling, V., Matthias, R., 2014, "Structure health monitoring of steel with CI-based methods," World Automation Congress, Waikoloa, Aug. 3-7, pp. 202-206. doi:https//doi.org/10.1109/WAC.2014.6935779
4 Han, S., Cho, S., Kang, T., Moon, S., 2019, "Design and Testing of ElectroMagnetic Acoustic Transducer applicable to Wall-Thinning Inspection of Containment Liner Pltes," Trans. of the KPVP, Vol. 15, No. 1, pp. 46-52. doi:https://doi.org/10.20466/KPVP.2019.15.1.046   DOI
5 Lee, J., Kim, W., Kwak, D., 2020, "Development of Inspection Technique for Filling or Unfilling of Containment Liner Plate Backside Concrete in Nuclear Power Plant," Trans. of the KPVP, Vol. 16, No. 1, pp. 37-41. doi:https://dx.doi.org/10.20466/KPVP.2020.16.1.037   DOI
6 Rose, J. L, 2002, "A baseline and vision of ultrasonic guided wave inspection potential," J. Press. Ves. Tech., Vol. 124, No. 3, pp.273-282. doi:https://doi.org/10.1115/1.1491272   DOI
7 Lee, J., Lee, S., 2009, "Application of laser-generated guided wave for evaluation of corrosion in carbon steel," NDT&E International, Vol. 42, No. 3, pp. 222-227. doi:https://doi.org/10.1016/j.ndteint.2008.09.011   DOI
8 Cawley, P., David, A., 1996, "The use of Lamb waves for long range inspection of large structures." Ultrasonics, Vol. 34, pp. 287-290. doi:https://doi.org/10.1016/0041-624X(96)00024-8   DOI
9 Wright, W., Hutchins, D., Jansen, D., Schindel, D., 1997, "Air-coupled Lamb wave tomography," IEEE Trans. Ultrason. Ferroelectr. Freq. control, Vol. 44, No. 1, pp. 53-59. doi:https://doi.org/10.1109/58.585190   DOI
10 Albiruni, F., Cho, Y., Lee, J., Ahn, B., 2012, "Non-contact guided waves tomographic imaging of plate-like structures using a probabilistic algorithm," Materials Trans., Vol. 53, No. 2, pp. 330-336. doi:https://doi.org/10.2320/matertrans.I-M2011853   DOI
11 Sheen, B., Cho, Y., 2012, "A study on quantitative lamb wave tomogram via modified RAPID algorithm with shape factor optimization," Int. J. Precis. Eng. Man., Vol. 13, No. 5, pp. 671-677. doi:https://doi.org/10.1007/s12541-012-0087-2   DOI
12 Park, J., Lim, J., Cho, Y., 2014, "Guided-wave Tomographic Imaging of Plate Defects by Laser-Based Ultrasonic Techniques," J. Kor. Soc. Nondestruc. Testing, Vol. 34, No. 6, pp. 435-440. doi:https://doi.org/10.7779/JKSNT.2014.34.6.435   DOI
13 Lee, J., Sheen, B., Cho, Y., 2015, "Multi-defect tomographic imaging with a variable shape factor for the RAPID algorithm," Journal of Visualization, Vol. 19, No. 3, pp. 393-402. doi:https://doi.org/10.1007/s12650-015-0290-1   DOI
14 Lee, J., Sheen, B., and Cho, Y., 2015, "Quantitative Tomographic Visualization for Irregular Shape Defects by Guided Wave Long Range Inspection," Int. J. Precis. Eng. Man., Vol. 16, No. 9, pp. 1949-1954. doi:https://doi.org/10.1007/s12541-015-0253-4   DOI
15 Lee, Y., and Cho, Y., 2019, "An Investigation on a Quantitative Tomographic SHM Technique for a Containment Liner Plate in a Nuclear Power Plant with Guided Wave Mode Selection," Sensors, Vol. 19, pp. 1-22. doi:https://doi.org/10.3390/s19122819   DOI
16 Hutchins, D. A., Jansen, D. P., Edwards, C., 1993, "Lamb-wave tomography using non-contact transduction," Ultrasonics, Vol. 31, No. 2, pp. 97-103. doi:https://doi.org/10.1016/0041-624X(93)90039-3   DOI
17 Chimenti, D. E., 1997, "Guided waves in plates and thrir use in materials characterization," Appl. Mech. Rev., Vol. 50, pp. 247-284. doi:https://doi.org/10.1115/1.3101707   DOI
18 Hay, T. R., Royer, R. L., Gao, H., Zhao, X., Rose, J. L., 2006, "A comparison of embedded sensor Lamb wave ultrasonic tomography approaches for material loss detection," Smart Mater. Struct., Vol. 15, No.4, pp. 946. doi:https://doi.org/10.1088/0964-1726/15/4/007   DOI
19 Belanger, P., Cawley, P., Simonetti, F., 2010, "Guided wave diffraction tomography within the born approximation," IEEE Trans. Ultrason. Ferroelectr. Freq. control, Vol. 57, No. 6, pp. 1405-1418. doi:https://doi.org/10.1109/TUFFC.2010.1559   DOI
20 Huthwaite, P., Simonetti, F., 2013, "High-resolution guided wave tomography," Wave Motion, Vol. 50, No. 5, pp. 979-993. doi:https://doi.org/10.1016/j.wavemoti.2013.04.004   DOI
21 Malyarenko, E. V., Hinders, M. L., 2001, "Ultrasonic Lamb wave diffraction tomography," Ultrasonics, Vol. 39, No. 4, pp. 269-281. doi:https://doi.org/10.1016/S0041-624X(01)00055-5   DOI