• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.3
• /
• pp.81-88
• /
• 2017

Aircraft maintenance failure doesn't only threaten flight safety but also causes significant economic losses such as flight delays, flight cancellations, air turn backs and diversion and so on. Therefore, the efforts should be made to detect the contributing factors that cause such maintenance failure and eliminate them. In this study, by analyzing factors contributing to system failure using the Maintenance Error Decision Aid (MEDA) model based on stochastic relations between the contribution factors, system failure and events, we will draw a improvement plan to aircraft maintenance defects.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.370-373
• /
• 2004

The inside and outside of the country utilities considered that they focused energy and economic aspect for short-term in new environment change of restructure. but it need service reliability preservation and improvement countermeasure, that is no to use existent estimation method for reliability preservation. therefore, analyze the equipment failure rate for suitable reliability preservation through equipment failure rate analysis of power distribution r system and evaluated equipment that is composing power distribution system by the failure rate. This paper estimated failure causes and the TVFR(Time Varying Failure Rate) for main equipment that is composing power distribution system using Weibull distribution.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.2
• /
• pp.143-148
• /
• 2013

In FMEA, occurrence and detectability are not related to only failure modes itself but also their causes. It is assumed that any failure occurs after at least one cause corresponding to failure occurs in advance. Occurrence of the failure mode is described by occurrence time of its cause and elapsed time to the actual failure. Under the periodic monitoring plan, the monitoring interval is another factor to determine the detectability and occurrence of each failure mode. When a failure cause occurs, the failure does not occur if the cause is identified and remedied before it actually occurs. Under this situation, we construct an economic model for prioritizing failure modes. The loss function is based on the unfulfilled mission period. We also provide an optimal monitoring plan with an illustrative example.

• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.53-65
• /
• 2002

This paper studies an economic manufacturing quantity (EMQ) model with two types of failures and planned preventive maintenance of the production facility. One is a type I (major) failure which should be corrected by a failure maintenance and the other is a type H (minor) failure which can be minimally repaired without interrupting the production run. The objective is to determine the lot size and preventive replacement policy minimizing the long-run expected cost per unit time. We consider a control policy with a constant production lot size and preventive maintenance after completing n production runs. It is assumed that both preventive and failure maintenance times are random and the demand arriving during a stock-out period is lost. An expression for the expected cost per unit time is obtained in the general case. A special case is discussed and numerical results are provided.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.12a
• /
• pp.77-84
• /
• 1993

Systems with journal bearings generally operate in large scale and under severe loading conditions such as steam generator turbines and internal combustion engines, in contrast to the machineries using rolling element bearings. Failure of the bearings in these machineries can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is employed to the detection of incipient failure caused by intervention of foreign particles most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as inserting alumina particles to the lubrication layer in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings.

• Journal of the Korean housing association
• /
• v.24 no.6
• /
• pp.151-161
• /
• 2013

This research is an effort to clarify the causes associated with the 'failure' of public housing projects built in the 20th century. Two of the most brutal symbol of failure were selected: the Pruitt-Igoe built in St. Louis, U.S.A. and the Bijlmermeer in the south of Amsterdam, Netherlands. Many critics have attributed the problems of the selected housing projects to architectural failure, and proposed a series of new approaches to architectural design. The claim that many housing projects 'failed' because they were based on an agenda for social reform, derived from the ideas of the CIAM, presupposes that architects were in the position of authority over providing housing for the poor. This research tries to overturn the belief of architectural community which has placed the responsibility for the failure of public housing on designers. The sense of isolation and powerlessness felt by the residents, and the social problems attendant on those feelings, may be reinforced by design but is not caused by Modern Architecture. It should be stressed that the political-economic and social context is more significant than the architectural design for the failure of public housing projects such as the Pruitt-Igoe and the Bijlmermeer.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.341-358
• /
• 2021

Purpose: After product development, a Reliability Demonstration Test(RDT) is performed to confirm that the target life has been achieved. In the RDT, there are cases where the test equipment cannot accommodate all samples. Therefore, this study considers a test method to most economically demonstrate the target life of the product at a certain confidence level when the sample size is larger than the capacity of the test equipment. Methods: If the sample size is larger than the capacity of the test equipment, test equipments may be added or the test time of individual samples may be increased. So the test method is designed to cover this situation with limited capacity. A zero-failure test method is applied as a test method to RDT. To minimize the cost, the test cost is defined and the cost function is obtained. Finally, we obtain the optimal test plan. Results: A zero-failure test method is designed when the sample size is larger than the capacity of the test equipment, and the expected total cost is derived. In addition, the process of calculating the appropriate sample size, test time, and number of test equipment is illustrated through an example, and the effects of model parameters to the optimal solutions are investigated numerically. Conclusion: In this paper, we study a zero-failure RDT with test equipment that has limited capacity. The expected total cost is derived and the optimal sample size, test time, and number of test equipment are determined to minimize the expected total cost. We also studied numerical examples and for further studies, we can relax some restrictions in the test model and optimize the test method.

• Knowledge Management Research
• /
• v.7 no.1
• /
• pp.49-63
• /
• 2006

The objective of the study is to verify the discriminatory power of technology innovation in predicting Early Stage Ventures' success or failure. To accomplish this objective, we test early stage ventures'(Firm's period is below 3 years)technology innovation and performance. The result of the study is expected to be useful in loan evaluation, investment decision, internal management decision making and business improvement. The results of study is as follows. First, Early Stage Ventures' technology innovation power is composed of 4 major indexes(technology, marketability, manufacturing infra and economic feasibility). Second, we find that thirty-seven minor indexes are significant ex-ante variable which are discriminating between firms' success and failure in Early Stage Ventures. Also thirty-seven minor indexes explain 57.2% of the total variance. This explainable power of these indexes is similar to that of the existing 58 index elements. Finally, we find that the most important technology innovation power of Early Stage Ventures' is economic feasibility.

• Economic and Environmental Geology
• /
• v.24 no.3
• /
• pp.309-318
• /
• 1991

Analysis for landslides was studied in framework of Chungju dam right abutment, 6.5km northeast of Chungju city. $5.5{\times}10^6m^3$ landslide materials were excavated during dam construction for safety of the Chungju dam. Geology of study area is composed mainly of meta sediments such as dolomitic limestone, quartzite and schist which are dipping toward the Nam Han river. Scanline survey of discontinuities was performed for slope stability, resistivity exploration was performed for the evaluation of potential failure plane, and direct shear strength test of rocks and soils was performed for the effect on landslide. Monitoring systems of tiltmeter, tensiometer, ground water observation hole and level monument were installed during dam construction and interpreted for the evaluation of slope instability. Kinematic solution of the geological structure and evaluation using safety factor for slope may prove the failure of the slope.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.4
• /
• pp.517-526
• /
• 1999

This paper deals with two economic optimal designs of constant-stress accelerated life test(ALT) where failure distribution follows one of location-scale family, i. e., exponential, Weibull, and lognormal distributions which have been ones of the popular choices of failure distributions. Two optimization criteria to develop ALT plans are the statistical efficiency per unit expected cost which consists of the fixed test cost, cost being proportional to the number of test units, and variable test cost depending on test period and stress level, and the expected loss which combines Taguchi's quadratic loss function and expected test cost. Optimum plan determines the low stress level, test units allocated to each stress, and censoring times at two stress levels under Type I censoring. The proposed ALT plans are illustrated with a numerical example and sensitivity analyses are conducted to study effects of pre-estimates of design parameters.