• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.1
• /
• pp.19-28
• /
• 2024

Environmental regulations are becoming more stringent in response to climate change, especially concerning marine pollution caused by ship emissions. Large ships are adjusting by integrating technologies to reduce pollutant emissions and transitioning to eco-friendly fuels such as low-sulfur oil and LNG. However, small ships face space constraints for installing LNG propulsion systems and the risk of power depletion with pure electric propulsion. Consequently, there's growing interest in researching hybrid propulsion methods that combine electricity and diesel for smaller vessels. Hybrid propulsion systems utilize diverse energy sources, requiring an effective method for evaluating their efficiency. This study proposes employing Bond graph modeling to comprehensively analyze energy dynamics within hybrid propulsion systems, facilitating better understanding and optimization of their efficiency. Modeling of the ship's energy system using Bond graphs will be able to provide a framework for integrating various energy sources and evaluating their effects.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.50-55
• /
• 2017

Foamed aluminum is an eco-friendly material that is reusable and safe against fire. These superior characteristics have many advantages in the field of building and construction and in cruise ships as sound absorbers. So far, the research on foamed aluminum has been focused on the sound absorption performance using the foaming ratio. Foamed aluminum, when compared with the existing sound absorbers such as glass wool or rock wool, has a better structural performance, and it can be installed on walls in many different ways. This study conducted experiments on the sound absorption characteristics considering the various applications of foamed aluminum. The effects of painting surfaces with the finishing material were compared to that of the normal surface, and the effects of vertical installation and hanging from the ceiling was compared with the effects of installing on the floor.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.3
• /
• pp.143-152
• /
• 2022

To reach a port, a ship must pass through a shallow water zone where seabed effects alter the hydrodynamics acting on the ship. This study examined the maneuvering characteristics of an autonomous surface ship at 3-DOF (Degree of freedom) motion in deep water and shallow water based on the in-port speed of 1.54 m/s. The CFD (Computational fluid dynamics) method was used as a specialized tool in naval hydrodynamics based on the RANS (Reynolds-averaged Navier-Stoke) solver for maneuvering prediction. A virtual captive model test in CFD with various constrained motions, such as static drift, circular motion, and combined circular motion with drift, was performed to determine the hydrodynamic forces and moments of the ship. In addition, a model test was performed in a square tank for a static drift test in deep water to verify the accuracy of the CFD method by comparing the hydrodynamic forces and moments. The results showed changes in hydrodynamic forces and moments in deep and shallow water, with the latter increasing dramatically in very shallow water. The velocity fields demonstrated an increasing change in velocity as water became shallower. The least-squares method was applied to obtain the hydrodynamic coefficients by distinguishing a linear and non-linear model of the hydrodynamic force models. The course stability, maneuverability, and collision avoidance ability were evaluated from the estimated hydrodynamic coefficients. The hydrodynamic characteristics showed that the course stability improved in extremely shallow water. The maneuverability was satisfied with IMO (2002) except for extremely shallow water, and collision avoidance ability was a good performance in deep and shallow water.

• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.35-39
• /
• 2019

Four different polymer compounds were prepared from four kinds of plasticizers, viz. di-2-ethylhexyl azelate (DOZ), di-2-ethylhexyl adipate (DOA), di-2-ethylhexyl sebacate (DOS), and di-2-butyl sebacate (DBS), for making cable sheaths for ships. Ethylene-vinyl acetate and ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinyl acetate grafted maleic anhydride as a coupling agent were compounded with a flame retardant, crosslinking agent, filler, and other additives, besides the plasticizer to obtain the polymer compounds. The polymer containing DOZ showed the highest MH and ${\Delta}T$ in the rheology test, while that containing DBS was found to have the lowest tensile strength and highest elongation because of low ${\Delta}T$. The four polymers showed similar values (31.7-31.9) for flame resistance, while the polymer containing DOZ showed the highest value for cold resistance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.856-866
• /
• 2021

The increasing international awareness regarding air pollutant reduction has resulted in increasing demand for eco-friendly ships; hence, electric ships are being actively developed by various countries. Presently, studies on electric ships are mainly focused on electric propulsion systems and electric motors. However, from the ship perspective, there are no studies on conceptual designs for coastal car ferries powered by removable power supply systems. In the present study, the main research consideration is regarding the conceptual design of a fully electrified car ferry using a battery-based removable system as the main power source. By analyzing the dimensions of more than 100 domestic coastal car ferries, the main criteria satisfying the requirements for developing a suitable vessel were derived, and a study on intact/damage stability was conducted considering the application of a removable battery truck. Further analyses of the problems concerning the conceptual design were also performed to derive solutions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.648-656
• /
• 2022

As environmental regulations such as the International Maritime Organization (IMO)'s strategy to reduce greenhouse gases(GHG) are strengthened, technology development such as eco-friendly ships and alternative fuels is expanding. As part of this, ship propulsion technology using energy reduction and wind propulsion technology is emerging, especially in shipping companies and shipbuilders. By securing wind propulsion technology and introducing empirical research into shipbuilding and shipping, a high value-added market using eco-friendly technology can be created. Moreover, by reducing the fuel consumption rate of operating ships, GHG can be reduced by 6-8%. Rotor Sail (RS) technology is to generate a hydrodynamic lift in the vertical direction of the cylinder when the circular cylinder rotates at a constant speed and passes through the fluid. This is called the Magnus effect, and this study attempted to propose a plan to increase propulsion efficiency through a numerical analysis study on turbulence flow characteristics around RS, a wind power assistance propulsion system installed on a ship. Therefore, C_L and C_D values according to SR and AR changes were derived as parameters that affect the aerodynamic force of the RS, and the flow characteristics around the rotor sail were compared according to EP application.

• Journal of Navigation and Port Research
• /
• v.47 no.1
• /
• pp.25-36
• /
• 2023

To limit greenhouse gas emissions from ships, numerous environmental regulations and standards have been taken into effect. As a result, alternative fuels such as liquefied natural gas (LNG), liquefied petroleum gas (LPG), ammonia, and biofuels have been applied to ships. Most of these alternative fuels are low flashpoint fuels in the form of liquefied gas. Their use is predicted to continue to increase. Thus, management regulations for using low flash point fuel as a ship fuel are required. However, they are currently insufficient. In the case of LNG, ISO standards have been prepared in relation to bunkering. The Society for Gas as a Marine Fuel (SGMF), a non-governmental organization (NGO), has also prepared and published a guideline on LNG bunkering. The classification society also requires safety management areas to be designated according to bunkering methods and procedures for safe bunkering. Therefore, it is necessary to establish a procedure for setting a safety management area according to the type of fuel, environmental conditions, and leakage scenarios and verify it with a numerical method. In this study, as a feasibility study for establishing these procedures, application status and standards of the industry were reviewed. Classification guidelines and existing preceding studies were analyzed and investigated. Based on results of this study, a procedure for establishing a safety management area for bunkering in domestic ports of Korea can be prepared.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.1
• /
• pp.60-66
• /
• 2023

Currently, the maritime industry is focusing on developing technologies that promote autonomy and intelligence, such as smart ships, autonomous ships, and eco-friendly technologies, to enhance ship operational efficiency. Many countries are conducting research on different methods to ensure ship safety while increasing operational efficiency. This study aims to develop a real-time ship operational efficiency analysis model using data analysis methods to address the current limitations of the present technologies in the real-time evaluation of operational efficiency. The model selected ship operational efficiency factors and ship operational condition factors to compare the operational efficiency of the ship with present and classified factors to determine whether the present ship operational efficiency is appropriate. The study involved selecting a target ship, collecting data, preprocessing data, and developing classification models. The results of the research were obtained by determining the improved ship operational efficiency based on the ship operational condition factors to support ship operators.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.158-161
• /
• 2018

In this paper, the towing force is calculated for the LNG bunker barge. LNG bunkering barge is being developed as an infrastructure for the bunkering of LNG(Liquefied Natural Gas), an eco-friendly energy source. In the case of the LNG bunker barge, a self-propulsion is considered through retrofit from an operating point. Therefore, the LNG bunker barge is similar to the shape of the ship as compared to a towed barge, so a rule of the towed barge overestimates the towing force. In order to improve accuracy, the calm water resistance is calculated according to the ITTC 1978 method considering the wave resistance by the Rankine source method. The added resistance in waves is calculated using the modified radiated energy method considering the shortwave correction method of NMRI. The performance of the towing resistances through the calm water resistance and the added resistance in waves was compared with rules of the towed barge.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.378-387
• /
• 2018

In this paper, the towing force for the LNG bunkering barge was investigated. Currently, LNG bunkering barge is being developed as an infrastructure for the bunkering of LNG (Liquefied Natural Gas), an eco-friendly energy source. In the case of the LNG bunkering barge, self-propulsion is considered through retrofit from an operating point. Therefore, the LNG bunkering barge's shape is similar to that of the ship as compared to a towed barge, so a rule of the towed barge overestimates the towing force. In order to improve accuracy, the calm water resistance was calculated using ITTC 1978 method which considers wave resistance by the Rankine source method. The added resistance in waves was calculated using the modified radiated energy method which considers the shortwave correction method of NMRI. The performance of the towing resistances through the calm water resistance and the added resistance in waves was compared to rules associated with towed barges.