• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.325-328
• /
• 2010

• Journal of Communications and Networks
• /
• v.15 no.2
• /
• pp.173-178
• /
• 2013

It is a concern that eco-driving vehicles, because their driving behavior differs from other vehicles due to e.g. e-start, may inhibit smooth traffic flow. Therefore, it is necessary to study the cooperative eco-driving done by a vehicle group, putting "vehicle-to-vehicle communication" and "road-to-vehicle communication" into perspective. Based on these factors, this study aimed to: 1) Analyze fuel consumption rates and driving behaviors of more than one vehicle following an Eco-Driving vehicle. 2) Examine the effect of information on the fuel consumption rate of the preceding vehicles on the following vehicles. As a result, the following findings were obtained: 1) By providing information to multiple following vehicles, the fuel consumption rate of the second vehicle was not lowered, while that of the third one was. 2) It is possible that, when information on fuel consumption of a preceding vehicle is provided to the following one, an inter-vehicular distance is shortened during deceleration to contribute to smooth traffic flow. From the above results, it is suggested that, when targeting a vehicle group, sharing the information on preceding vehicles is effective.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.111-118
• /
• 2022

Recently, as underground facilities buried under roads in Korea are aging, the amount of underground facility maintenance work is rapidly increasing. For the maintenance and management of such underground facilities, the cutting work of the road pavement should be preceded. However, the conventional road pavement cutters used in Korea are not eco-friendly, and the reality is that they generate a lot of noise and cutting sludge (scattering dust). Therefore, in this study, the concept of the cutting sludge recovery device was derived, and an eco-friendly pavement cutter including this function was designed and manufactured. The developed equipment took about 20 to 30 seconds to cut 1m to a depth of 100 to 150mm. Also, the sludge suction performance was good in most sections, and the noise level of the equipment briefly measured at a distance of 2m was 82.7dB on average. However, due to the limitation that the developed equipment was at the level of the first prototype, the driving stability was somewhat low, and equipment abnormalities such as engine shutdown and sludge recovery performance decreased in some cases. The cutting performance and sludge recovery function will be more stable through tuning and improvement of the developed prototype in the future. In addition, we plan to quantitatively compare and analyze productivity by applying the improved prototype to actual field conditions.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.57-66
• /
• 2017

PURPOSES : This study develops eco-friendly asphalt reinforcement materials applicable to bridge deck pavement. The main purpose is to ensure highly reliable quality applicable to structures and the possibility of practical application. The main target of the study is to develop materials that are environmentally friendly and capable of improving performance. METHODS : The application of double-reinforcement fiber improves the performance of the road pavement. 1. We use recycled film for application of sheet-typed reinforcement. 2. We use preprocessing fibers to reinforce the properties of composite pavement materials. RESULTS : The developed products may produce materials that fit the purpose of achieving stability and environmental friendliness. Sheet-typed reinforcements use more than 50% recycled resin. The most important type of damage to the asphalt layer is deflection (plastic deformation). These products have a very high deflection resistance of not less than 6,000 cycles/mm. In addition, all performance is excellent. Thus, it will be easier to access the field in the future. CONCLUSIONS : Fiber-reinforced asphalt pavement showed excellent performance. Sheet-typed reinforcements containing 50% recycling resin produced good performance in terms of functionality as well as environmental friendliness. Thus, enhancing the field applicability will enhance the usability of the reinforcements.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.191-199
• /
• 2019

Road development is considered an important factor in invasion and dispersion of ailen plants by damaging the natural ecosystems and connecting the detached landscapes into long tubular structures. In this study, vegetation survey was carried out according to the topographical characteristics of cut slope, fill slope, and flat land at the construction site in order to understand the effect of road developemt on the change of the floristic composition of ailen plants. Road developement projects caused a lot of changes in annual and biennial alien plants because of continuous disturbances. Changes in species composition of alien plants decreased in the cut slope. On the other hand, the ailen palnts of the fill slope increased. The increase or decrease alien plants on flat land were identified depending on where it occurred, and no major trend was found. The cause of these change was driven by unintentionally introduced alien plants. In particular, the cut slope with a high occurence of unintentional ailen plants should not be used as a source of high-risk alien plants such as ecosystem disturbances. Since the transplanted species were intentionally planted by the landscape plan, it was possible to identify colonies from early stages and spread to the nearby flat land. Therefore, in order to minimize the impact of road slope vegetation on the surrounding ecosystem during and after road construction, it is suggested to plant high viability plants in the landscape design during the environmental impact assessment consultation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.4
• /
• pp.519-529
• /
• 2024

Vehicle toll discounts on private roads are categorized into two types: non-sunset and sunset. Sunset types refer to provisions in which all or part of a law loses its effect upon a specific legislator-set deadline. Vehicles eligible for 'sunset' discounts include cargo vehicles operating late at night and eco-friendly vehicles powered by electricity or hydrogen. Korean government has subsidized all reduced toll fees for vehicles classified as non-sunset types on private roads to operators, but no subsidies have been provided for toll reductions on sunset vehicles. The rapid increase in electric hydrogen vehicles escalates the burden of reduced toll revenue on private road operators. This study analyzed traffic volume and toll reduction data from eight private road operators nationwide as of the end of 2023 to propose the necessity and method of supporting sunset-type toll reduction subsidies. In 2022, the subsidy for non-sunset types amounted to 87.5 billion won, or 18.6 % of total traffic revenue. The toll exemption and reduction ratio under the concession agreement ranged from 4.0 % to 5.65 % of total traffic volume for each operator. Although the proportion of vehicles exempted from sunset traffic increased from 0.85 % in 2017 to 2.79 % in 2022, the reduction amount ratio reached 4.2 % (KRW 25.5 billion) of total traffic revenue in 2022. The escalating number of registered eco-friendly vehicles is gradually causing operating profit losses on private roads. In alignment with the government's policy to expand eco-friendly vehicles, it is imperative to consider including vehicles eligible for toll reductions listed under the sunset category for subsidy payments. The study established a minimum ratio for toll reduction assistance at 4.0 %, agreed upon between the road authorities and private operators. Three policy alternatives were proposed to ensure preservation of amounts exceeding this threshold for sustaining adequate toll revenue for private road operators.

• Structural Engineering and Mechanics
• /
• v.53 no.3
• /
• pp.519-536
• /
• 2015

On-line electric vehicle (OLEV) is a new eco-friendly transportation system that collects electricity from a power cable buried beneath the road surface, allowing the system to resolve various problems associated with batteries in electric vehicles. This paper presents a finite element (FE) based thermo-mechanical analysis of precast concrete structures that are utilized in the OLEV system. An experimental study is also conducted to identify materials used for a joint filler, and the observed experimental results are applied to the FE analysis. Traffic loading and boundary conditions are modeled in accordance with the related standards and environmental characteristics of a road system. A series of structural analyses concerning various test scenarios are conducted to investigate the sensitivity of design parameters and to evaluate the structural performance of the road system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.5
• /
• pp.455-465
• /
• 2020

As cities continue to expand and additional underground structures are constructed, a policy is being planned to expand addresses, which are national framework data. In this study, the application scope of a proposed 3D (three-dimensional) mixed-use complex space for assigning 3D addresses was defined, based on past research on 3D address systems and by analyzing related laws. Underpass shopping malls, underground walkways (excluding underground shopping malls), and 3D mixed-use transfer centers with a gross floor area of 2,000㎡ or more are connected with each space by underground walkways or public paths. In addition, the detailed space corresponding to the public space of the 3D mixed-use complex space was presented and distinguished from the space to which the detailed address is assigned. The criteria for setting the road section were presented based on the intermediate space, which is a characteristic of 3D mixed-use complex spaces. The proposed criteria were applied to the Express Bus Terminal station (3D mixed-use transfer center) and COEX mall (underpass shopping malls). Thus, the road section was set for an unfamiliar 3D mixed-use complex space. However, by applying the proposed criteria to various 3D mixed-use complex spaces, additional and detailed criteria for different cases should be prepared.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.4
• /
• pp.157-169
• /
• 2010

This study has intended to devise a comprehensive rural planning, driven by residents based on ecological rural amenity paradigm for Busu area, Boeun-gun, South Korea. To reach the goal, this study has performed the following processes. First, we have analyzed the elements of threat, opportunity, weakness, and strength in both inside and outside village through 'SWOT analysis. Second, through strategic analysis and consultation, we have proposed developmental directions of Busu area. Third, based on an ecological rural amenity planning system composed of ecological economy system, ecological environment system, ecological history-culture system, ecological image system, and ecological society system, we have suggested research projects of each system Fourth, we selected projects through a general meeting with all stakeholders. Fifth, the selected projects were applied to Busu area by village residents and experts. Finally, the projects, which were appraised and revised by experts, residents, and governmental officers, were composed of ecological scenic agriculture center, resident's site for city dweller, energy independent village, eco-road, eco-pond, ecological park and parking lot, restoration of traditional culture, zone of ecological scenic agriculture, eco-tunnel, eco-fence, landmark, corporate identity, community center, forum and seminar, and education for residents' empowerment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.132-144
• /
• 2023

European and American countries are actively promoting eco-friendly cars to reduce exhaust emissions from internal combustion engines. In Korea, the "4th Basic Plan for Eco-Friendly Vehicles" aims to promote eco-friendly cars by improving charging infrastructure, expanding incentive systems, and targeting the supply of 1.13 million eco-friendly cars by 2025. As rapid growth in the number of electric vehicles sold is expected, estimates are required of this growth and corresponding power demands. In this study, the authors used a growth model to predict future growth in the electric vehicle market and a previously derived electricity generation model to estimate corresponding power demands up to 2036, the target year of the "10th Basic Plan for Power Supply and Demand". The results obtained provide useful basic research data for future electric vehicle infrastructure planning.