• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.639-646
• /
• 2015

A treatment for improving the characteristics of a surface is very important in increasing the life of machine parts. Many studies have been carried out on the surface characteristics after such treatments. For enhanced eco-technology, an alternative to a conventional chemical surface treatment process is essential. Ultrasonic nano-crystal surface modification (UNSM) technology is a physical environmentally friendly surface treatment method. This technology was developed in domestic and currently being used. As the mechanism of UNSM technology, a ball tip attached to an ultrasonic vibration device strikes the metal surface at nearly 20,000 times per second. The resulting modified surface layer improves the surface characteristics. This paper describes a self-developed fast tool servo system applied to the UNSM process as a vibration module within a high-frequency bandwidth. After describing the surface modification process based on the material and process changes, the surface characteristics are compared.

• 한국콘텐츠학회논문지
• /
• 제21권12호
• /
• pp.275-286
• /
• 2021

문화·예술은 언제나 사회 문제와 이슈에 적극적으로 개입하고 메시지를 던지는 반면, 전시와 같이 그것을 보여주는 방식에 있어서 환경문제에 역행하고 있다는 비판의 목소리가 있다. 이에 본 연구는 환경적으로 지속가능한 전시 콘텐츠 기획·운영 방안을 도출하고자 기존의 국내 국·공립 및 민간미술관에서 개최된 4종의 전시에 적용된 환경친화적 방식을 비교·분석해 보았다. 4종의 전시에 공통적으로 적용된 방식을 도출해 보면, 현지 재제작 또는 폐자원 활용, 조립식 모듈 벽체를 통해 폐기되는 목재 가벽을 최소화하였다. 또한 인쇄/출판 시, 환경친화적 잉크·소재를 접목하거나 불필요한 인쇄물의 제작 자체를 지양하는 방식 등이 있었다. 이와 같은 공통 요소를 바탕으로 전시장 구축·조성, 인쇄·출판, 전시장 운영의 단계별로 적용해 볼 수 있는 방안을 도출하였다. 다만, 향후 보다 다양한 사례에 대한 접근이 필요하며, 정량적인 측면에서 과학적 설명력을 제고시키기 위한 점은 보완이 필요하다.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.200-207
• /
• 2016

자동차 시트는 운행 중에 운전자와 항상 같이 움직이는 핵심부품으로 다양한 기능과 편의장치를 포함하는 제품의 개발이 활발히 진행되고 있는 추세이다. 본 논문에서는 경량화 소재를 적용한 경량형 시트 쿠션 익스텐션 모듈 개발을 위해 구조강도 해석평가, 수직강도 시험평가, 그리고 내구강도 시험평가를 수행하였다. 구조해석 결과, 수직 하중 부하 시 변형량의 최대값은 4.98mm로 상판의 최 전단에서 발생하였다. 최대응력은 약 105MPa로 익스텐션 모듈의 상판과 하판이 접촉하는 부분에서 발생함을 확인하였다. 수직강도 시험평가 결과, 수직 하중 부하 시 변형량의 최대값은 5.31mm로 구조해석 결과 대비 약 6.45% 정도의 차이가 나타났으며 수직강도 및 20,000회 내구강도 시험 후 제품에는 작동 시 유해한 변형 및 파괴가 없음을 확인함으로써 구조 안전성을 검증하였다. 본 연구에서는 엔지니어링 플라스틱 소재를 적용하여 기존 양산품 대비 약 30%의 중량절감을 확인하였고 정적 강도, 내구 강도 시험 후 파손이 되지 않으므로 승객의 안정성과 제품의 충분한 강도와 강성을 검증하였다. 본 논문에서 수행한 연구결과는 환경/연비규제 강화에 대응 가능 및 운전자의 피로도 감소로 인한 사고 예방 효과 증대, 고급 승용차뿐만 아니라 소형 및 경차종, 상용차, 특장차 등에 확대 적용, 친환경, 경량화 소재 적용기술을 활용한 타 산업분야 및 부품에 확대 적용이 예상된다.

• 한국주거학회논문집
• /
• 제25권4호
• /
• pp.39-46
• /
• 2014

This research was for the investigation and analysis of the illustration of modular construction application which is different use by each school facility since modular construction related examples are rare in domestic situation, and it has a limitation because of its being basic research material for generating the basic form of modular construction. The research results are as followings. First, in case of school facility from illustration investigation results, module measurement of class modulation is as similar as $3m{\times}10m$, but in resident facility the planning of more flexible plane shape can be possible since modules of 6 cases are free and various, and facade form of various types can be appeared by combination of module unit. Second, as a result of the generated characteristics in compared analysis of representative examples, school facilities were highly indicated for movability and duration reduction areas, and the flexibility, economic efficiency, and environment-friendliness was indicated low relatively. Third, the basic planning types of modular construction can be largely divided into layered type, horizontal (straightway) type, and compound type. The layered type has a short traffic line and facility system and is appropriate for the low-rise form unless separate construction method is used since it is susceptible to load. The horizontal type is advantageous for securing an opening since it has wide extent in light but has a long traffic line and facility system. Finally, the compound type can be possible for planning of various forms but needs the combination of various unit modules and traffic line and facility plan for it can be difficult.

• 한국실내디자인학회논문집
• /
• 제26권6호
• /
• pp.97-105
• /
• 2017

Korea is promoted STEAM education since 2011. Furthermore, in high school education, based on the in-depth elective course's teaching and learning contents of science. The STEAM program can improve students' competence because it encourages to self-directed learning through the vocational project performance. Therefore, in this study, we researched a design education program for the experience of fusion and complex design based on STEAM education concept. We developed an education program to design insulation wall systems using up-cycling concepts to increase energy efficiency. As a result, the characteristics of the fusion education and the theoretical study about the learner-centered education curriculum, the analysis of the high school curriculum, the STEAM elements, The program was revised and supplemented through consultation with STEAM experts. In addition, the developed program was applied to high school students, and each step were analyzed based on the educational method theory. The following results were obtained. First, this study presented a program to cope with the needs of high school intensive education. Second, it provided learning motivation by combining flipped-learning as a way to train STEAM education contents. Third, it is required to develop differentiated and continuous program development and data sharing Fourth, in order to operate and promote the future environment design STEAM school, it is necessary to expand educational programs for high school students in the region through linkage with various universities.

• 지능정보연구
• /
• 제17권2호
• /
• pp.109-117
• /
• 2011

전시 공간에서 전시 제공자는 자신의 마케팅 정보를 원활하게 제공하고 관람객의 반응을 실시간으로 확인하기를 원한다. 또한 전시 관람객은 자신이 가장 관심 있어 하는 분야의 부스를 관람하고 그 분야에 대한 정보를 얻고 싶어한다. 그런데 전시장을 방문하는 관람객들에게 상호 작용적 맞춤 개인화 마케팅 서비스를 관람객의 단말기를 통해 제공하게 된다면 전시 제공자와 관람객 모두의 요구를 충족하게 될 것이다. 이러한 서비스를 제공하기 위해서는 사용자의 의도를 인지할 수 있어야 하고 그 인지된 정보를 기준으로 해서 선별적인 서비스를 제공해야 한다. 본 논문에서는 전시 공간에서 관람객 개개인의 선호도와 상황을 인식하고 인식된 정보를 기본으로 해서 관람객 개인별로 가장 적합한 전시 참가 업체의 마케팅 정보나 부스 정보를 관람객이 소유한 스마트폰을 통해 제공하는 지능형 개인화 서비스 어플리케이션을 설계하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권4호
• /
• pp.281-291
• /
• 2012

MPUV와 Plasma를 사용하여 선박의 평형수를 처리하는 ARA Plasma BWTS가 개발되었으며, 이로부터 방류되는 배출수가 해양생태계 미치는 영향을 파악하기 위하여 Skeletonema costatum, Tigriopus japonicus 및 Paralichthys olivaceus를 이용하여 배출수독성시험과 생성된 화학물질에 대한 환경위해성을 평가하였다. 34 psu 배출수는 P. olivaceus에 대하여 미약한 만성 독성영향을 보였다($7d-LC_{50}{\Rightarrow}100.00%$ 배출수, $7d-LC_{25}{\Rightarrow}85.15%$ 배출수). 34 psu 배출수에서 Bromobenzene, chlorobenzene과 4-chlorotoluene이 해수의 배경농도보다 높게 검출되었다. MAMPEC을 이용한 Bromobenzene, chlorobenzene과 4-chlorotoluene의 PEC 산출결과는 각각 3.34E-03, 2.10E-03 및 1.73E-03 ${\mu}g\;L^{-1}$이었고, PNEC는 1.6, 0.5 및 1.9 ${\mu}g\;L^{-1}$였다. 세 화학물질의 PEC/PNEC 비율은 1을 초과하지 않았고, PBT 특성을 보이지 않았다. 따라서 WET test 결과와 환경위해성평가결과는 ARA Plasma BWTS에 의하여 처리된 해수가 해양생태계에 수용 불가한 영향을 미치지 않을 것임을 시사하였다.

• Architectural research
• /
• 제18권4호
• /
• pp.137-144
• /
• 2016

The objective of this study was to determine the optimal angle of a wind louver that would induce the optimal wind speed for indoor. Being controlled to have an optimized angle depending on the direction from which wind is blowing and the wind speed, the wind louver to be installed on the building envelop comes to create indoor comfort through a constant wind speed using the function that reduces the indoor wind speed by changing the angle when the wind speed is not lower than a certain level and makes wind flow into the room to the maximum when the wind direction is adverse to catching the wind or the wind speed is not higher than a certain level. To determine the optimal wind louver angle, a core-centered office building with cross-ventilation problems in the climate of Seoul, Korea, which experiences four distinct seasons, was considered for analysis in this study. A module 1 office space model was used for the CFD simulation to analyze the average indoor wind speed with respect to the outdoor wind speed (varied between 1 and 8 m/s), the wind louver angle, and the outdoor wind direction (varied between $0^{\circ}$ and $180^{\circ}$ in steps of $10^{\circ}$).

• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.459-468
• /
• 2008

A web-based Computer-Aided Engineering (CAE) supporting system is connected with a Product Data Management (PDM) system for Small and Medium Enterprises (SMEs) suffering from the lack of building hardware, software and related experts. An analysis of current business models and worksite requirements provides an improved process model and data to be shared between the PDM system and the CAE supporting system. Since all engineering tasks such as geometric modeling, mesh generation, static stress and modal analysis, and fatigue durability analysis are automated in the CAE supporting system, the user in charge of the CAE have only to configure the concerned values of design variables and result data through the web page. The existing Change Management module of the PDM system is modified for seamless data exchange, i.e. sending the Engineering Change Order (ECO) data to the CAE supporting system and receiving the CAE result data bark. The hi-directional data transfers between the PDM system and the CAE supporting system is made possible by adaptors bused on the Simple Object Access Protocol (SOAP). The current approach will be very helpful for SMEs that only have the PDM system and have no adequate infrastructure for CAE.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.847-851
• /
• 2010

It was attempted to develop an auto part by over molding injection mold that produces precision products in high productivity with use of an eco-friendly TPE substitute material for NBR. NBR is currently used in motor gear cover, one of the key parts in motor module for auto doors. Gear cover is composed of plastics and rubber mostly today, which requires a two (2) step process for production using two presses of different types. A hot press is used at this time for forming the rubber, which has drawback of requiring a rather long forming time of 400 seconds for one forming process. Even though this difficulty is overcome by reducing production time through employment of multi-cavity molds, time for forming process must be shortened for improvement of the productivity eventually, and the existing method of insert injection for products that have been formed with plastic material must be outgrown. In this point of view, over molding injection using TPE has a big advantage. Forming time is shortened to 54 seconds, and working the two (2) processes in series by one (1) press could solve the durability problem caused by deflection of the plastics, not to mention shortening the process time. Enhancement of productivity by almost 80% and improvement in the accuracy of the product could thus be achieved.