• Restorative Dentistry and Endodontics
• /
• v.49 no.2
• /
• pp.12.1-12.10
• /
• 2024

Objectives: This study evaluated the impact of different methods of irrigant agitation on smear layer removal in the apical third of curved mesial canals of 3 dimensionally (D) printed mandibular molars. Materials and Methods: Sixty 3D-printed mandibular second molars were used, presenting a 70° curvature and a Vertucci type II configuration in the mesial root. A round cavity was cut 2 mm from the apex using a trephine of 2 mm in diameter, 60 bovine dentin disks were made, and a smear layer was formed. The dentin disks had the adaptation checked in the apical third of the teeth with wax. The dentin disks were evaluated in environmental scanning electron microscope before and after the following irrigant agitation methods: G1(PIK Ultrasonic Tip), G2 (Passive Ultrasonic Irrigation with Irrisonic- PUI), G3 (Easy Clean), G4 (HBW Ultrasonic Tip), G5 (Ultramint X Ultrasonic tip), and G6 (conventional irrigation-CI) (n = 10). All groups were irrigated with 2.5% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. Results: All dentin disks were 100% covered by the smear layer before treatment, and all groups significantly reduced the percentage of the smear layer after treatment. After the irrigation protocols, the Ultra-X group showed the lowest coverage percentage, statistically differing from the conventional, PIK, and HBW groups (p < 0.05). There was no significant difference among Ultramint X, PUI-Irrisonic, and Easy Clean (p > 0.05). None of the agitation methods could remove the smear layer altogether. Conclusions: Ultramint X resulted in the most significant number of completely clean specimens.

• Journal of the Korean Ceramic Society
• /
• v.23 no.3
• /
• pp.67-77
• /
• 1986

various properties and manufacturing conditions were investigated in order to synthesize the glass-ceramics of $CaO-P_2O_5$ system for bioceramics. Compositions of easy unidirectional crystallization were between 47.5 and 50, 0mol% CaO For the glass rods prepared by pulling them to about 3 times the original rod length unidirectional crystallization was easier than original glass rods. These samples were crystallized in the axial direction at 15${\mu}{\textrm}{m}$/min in an electric furnace with a temperature gradient of about 3$0^{\circ}C$/cm at 57$0^{\circ}C$. Bending strengths of surface and unidirectionally crystallized samples were investigated with various CaO/$P_2O_5$ molar ratios. The bending strengths of unidirectionally crystallized samples were larger than those of surface -crystallized samples and the value of 47.5CaO.52.5 $P_2O_5$ was 1650kg/$cm^2$. XRD patterns showed that major phase is $\beta$-Ca(PO3) with minor phase 2CaO.$P_2O_5$ Relative crystal-linity of surface-crystallized sample was inversely propertional to the bending strenth. SEM of fracture surface of unidirectionally crystallized samples revealed an unidirectionally aligned structures.

• Convergence Security Journal
• /
• v.19 no.5
• /
• pp.85-90
• /
• 2019

The purpose of this study is to analyze the trend of exercise intervention applying various devices to increase the physical activity of the disabled, and to suggest the exercise intervention using converged devices that meet the needs of the times due to the increase of elderly people with disabilities. Exercise intervention using converged devices applicable to the disabled is divided into two types: first, exercise intervention using virtual reality-based gamification, and second, exercise intervention based on wearable devices of wearable or body-attached such as bands and watches. For exercise intervention using converged devices that can be enjoyed by the elderly with disability, minimize of environmental limitations, and easy to personalize, there is a need for configuration requirements such as easy operation and simple rules of operation, easy device installation and wearing, a trainer who can complement immature device utilization. In order to maintain and improve the daily living performance of the elderly with disabilities who experience a significant decrease in their cognitive and physical functions, it is necessary to use a physical activity game that can be experienced and can be interested in everyday life or a variety of devices to increase the amount of physical activity.

• Ocean Science Journal
• /
• v.41 no.2
• /
• pp.97-104
• /
• 2006

A useful radiance-converting method was developed to convert the Landsat-7 ETM+thermal-infrared (TIR) band's radiance ($L_{{\lambda},L7/ETM+}$) to that of Landsat-5 TM TIR ($L_{{\lambda},L5/TM+})$ as: $L_{{\lambda},L5/TM}=0.9699{\times}L_{{\lambda},L7/ETM+}+0.1074\;(R^2=1)$. In addition, based on the radiance-converting equation and the linear relation between digital number (DN) and at-satellite radiance, a DN-converting equation can be established to convert DN value of the TIR band between Landsat-5 and Landsat-7. Via this method, it is easy to integrate Landsat-5 and Landsat-7 TIR data to retrieve the sea surface temperature (SST) in coastal waters on the basis of local empirical algorithms in which the radiance or DN of Lansat-5 and 7 TIR band is usually the only input independent variable. The method was employed in a local empirical algorithm in Daya Bay, China, to detect the thermal pollution of cooling water discharge from the Daya Bay nuclear power station (DNPS). This work demonstrates that radiance conversion is an effective approach to integration of Landsat-5 and Landsat-7 data in the process of a SST retrieval which is based on local empirical algorithms.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.372-377
• /
• 2013

Machinable SiC ceramics are prepared with the addition of $Al_2TiO_5$. Ready-to-press SiC and $Al_2TiO_5$ powders are mixed and pressureless sintered at $1750^{\circ}C$ and $1850^{\circ}C$ for 1 h. The weight ratios of the SiC and $Al_2TiO_5$ powders are 100 : 0, 100 : 10, and 100 : 20. After sintering, only SiC peaks are detected in the X-ray diffraction analyses. The density, strength, and grain size of the SiC increase with increases in the $Al_2TiO_5$ content and sintering temperature. The $Al_2TiO_5$-doped specimens are easy to micro-hole machine. Based on the density and strength data, the ceramics sintered at $1850^{\circ}C$ can be used as machinable ceramics.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.300-308
• /
• 1996

This study was conducted to identify factors involved in rooting of Japanese larch cuttings. Cuttings were taken every week from June 24th to July 25th before and after the 10th of July which supposed to be best time for cutting. The content of IAA, carbohydrate, nitrogen and inorganic elements such as $Mg^{{+}{+}}$, $K^+$ and $Ca^{{+}{+}}$ within cutting materials were analyzed. After the cuttings were planted, the root development was observed every week. Cuttings of easy-to-root clones were higher in IAA contents than the cuttings of hard-to-root clones at the time of cuttings were taken. There were significant differences in moisture content of cuttings taken on June 24th and July 25th between easy-to-root and hard-to-root clones, however no significant differences in moisture contents were observed between them taken on the 8th and 15th of July which supposed to be the best time for cutting. Inorganic matters and carbohydrate contents of cuttings taken from hedged trees were higher than those of non-hedged trees. The ratios K/C and C/N of cuttings taken from hedged trees were higher than those of non-hedged trees. Cuttings taken from easy-to-root clones showed higher content of carbohydrate and nitrogen than those of hard-to-root clones. The contents of inorganic elements, such as $Mg^{{+}{+}}$, $K^+$, and $Ca^{{+}{+}}$ in cutting taken from hard-to-root clones were slightly higher than that of easy-to-root clones. The ratio C/N and K/C of cuttings which were taken from easy-to-root clones have shown a similar trend of carbohydrate and nitrogen. These data indicate that there was no one dominant factor that affect rooting of cutting, but many factors such as contents of IAA, carbohydrate, nitrogen, phosphate, and ratios of C/N and K/C appeared to affect on rooting of cuttings variously. Most of root initials were formed from phloem tissue within one week after cutting, and few were formed from callus tissue. Root primordia were developed from root initials within two weeks after cutting, and most of new roots were developed from root primordia within about five weeks after cutting.

• Microbiology and Biotechnology Letters
• /
• v.37 no.2
• /
• pp.153-159
• /
• 2009

Recombinant Escherichia coli BLR(DE3) harboring the hemA gene from Rhodobacter capsulatus under the control of a constitutive promoter, which we constructed previously, was used for the extracellular production of 5-aminolevulinic acid (ALA). The effects of several factors on ALA production were investigated in flask culture. ALA production by the recombinant E. coli was more efficient at $30^{\circ}C$ than $37^{\circ}C$. The glycine concentration had an important effect on cell growth. Glycine and succinic acid concentration of 5-10 and 10-20 g/L, respectively, resulted in high ALA production. In addition, the partial replacement of succinic acid by sodium glutamate increased the ALA production. The ALA production was inhibited by the presence of glucose in the medium. Using the optimal conditions, an ALA concentration of 8.2 g/L was achieved in jar fermentation without an added inducer or ALA dehydratase inhibitor; this is the highest reported concentration.

• The Korean Journal of Physiology
• /
• v.11 no.2
• /
• pp.45-50
• /
• 1977

The maximum voluntary ventilation (MVV) is one of the most widely used pulmonary function test, but its measuring method was very difficult and unreliable. However, it is need to get more easy and simple measuring method of MVV. Therefore, this study was attempted to get more easy and simple measuring method of MVV by means of the forced expiratory volume $(FEV_{T})$. The young and healthy 1,000 Korean students(592 male and 408 female) were cheesed for this purpose and whose ages were from 8 to 20 years. A spirometer (9L, Collins Co.) was used for the MVV and FEV, and they were measured 3 times at standing position, and the highest value was used. In the measurements, the subjects for MVV were asked for the breath as fast and deeply as possible for 12 seconds, and for FEV were asked for the rapid and forceful exhalation after a maximal inhalation (forced expiratory curve). In the FEV measurements toward the end of the expiration, the subjects were exhaused to continue the effort until no further gas was expired. During these measurements, the investigator stood by the subject to give a constant encouragement. FEV were calculated in the volume exhaled during the one-half $(FEV_{0{\cdot}5,}\;ml)$, the first second $(FEV_{1{\cdot}0,}\;ml)$ and the percentage of the total vital capacity exhaled during the one-half second $(FEV_{0{\cdot}5,}\;%)$. The results are summarized as follows: 1) The values of MVV were increased linearly with ages until 20 in both sexes. The values of male at the age of 20 was $168.2{\pm}2.5L/min$, and female at the age of 17 was $112.3{\pm}3.0L/min$, respectively. 2) The values of FEV (ml) were increased linearly with ages until 20 in both sexes. The values of $FEV_{0{\cdot}5}$ were $2,797{\pm}65.7ml$ in the male of 20 years and were $2,088{\pm}54.6ml$ in the female of 17 years, and of $FEV_{1{\cdot}0$ were $4,119{\pm}68.2ml$ in the male of 20 years and were $2,897{\pm}65.9ml$ in the female of 17 years, respectively. 3) The correlation coefficients between MVV and $FEV_{0{\cdot}5}\;or\;FEV_{1{\cdot}0$ (ml) were 0.82 or 0.85 in the male, and 0.77 or 0.79 in the female, respectively. 4) The prediction formulae for MVV to be derived from above results were: For male: MVV (L/min) =7.19+$0.05{\times}FEV_{0\cdot5}(ml)$, MVV (L/min)=11.25+$0.04{\times}FEV_{1\cdot0}(ml)$ For female: MVV (L/min)=16.03+$0.05{\times}FEV_{0\cdot5}(ml)$, MVV (L/min)=9.47+$0.03{\times}FEV_{1\cdot0}(ml)$.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2758-2764
• /
• 2014

We demonstrated the synthesis of organic carbonates using alkyl/aryl 4,5-dichloro-6-oxopyridazine-1(6H)-carboxylates and alcohol in the presence of aluminum chloride. Alkyl/aryl 4,5-dichloro-6-oxopyridazine-1(6H)-carboxylates were reacted with alcohol in the presence of $AlCl_3$ in toluene at room temperature to afford the corresponding unsymmetric and symmetric organic carbonates in good to excellent yields. These are efficient and convenient processes. Alkyl/aryl 4,5-dichloro-6-oxopyridazine-1(6H)-carboxylates are solid, stable and non-toxic $CO_2/CO_2R$(Ar) source. It is noteworthy that the reaction is carry out under an ambient and acidic conditions, the easy-to prepare and readily available starting materials and the quantitative isolation of reusable 4,5-dichloropyridazin-3(2H)-one.

• Journal of the Korean Chemical Society
• /
• v.51 no.6
• /
• pp.520-525
• /
• 2007

Three-component coupling of thiourea/urea, various structurally diverse aromatic aldehydes and ammonium acetate is catalyzed by activated fly ash in dry media under microwave irradiation to give 6-aryl-1,2,4,5-tetrazinan- 3-thiones/ones in good yields. The structure of 6-aryl-1,2,4,5-tetrazinan-3-thiones/ones have been elucidated on the basis of their melting points, elemental analysis, MS, IR, 1H NMR, D2O exchange, 13C NMR and two dimensional NMR spectral studies including Homonuclear Correlation (HOMOCOR) and Heteronuclear Single Quantum Correlation (HSQC) spectra.