• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1-6
• /
• 2007

A train is subject to a series of reliability-related tasks through its entire life cycle. Among them the reliability demonstration is required for commercial trains and the test is performed during the commissioning period or the early stage of the commercial operation. On the other hands various test are carried out for prototype trains and hence their operational condition is quit different from that of the commercial trains. One should take account of these differences when reliability assessment is needed for the prototype trains. This paper presents a procedure and an analysis method to evaluate reliability of a prototype train. Reliability data have been obtained through test runs of the HSR-350x and operational conditions for the KTX and HSR-350x have been analyzed to compare the reliability targets of the prototype train.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.24-28
• /
• 2015

Composite materials are highly sensitive to the presence of manufacturing and service-related defects that can reach a critical size during service condition and thereby may affect the safety of the structure. When the structure undergoes some kind of damage, its stiffness reduces, in turn the dynamic responses change. In order to avoid safety issues early detection of damage is necessary. The knowledge of the vibration behavior of a structure is necessary and can be used to determine the existence as well as the location and the extent of damage.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.415-419
• /
• 2015

Engineering is a value-adding process applying knowledge and skills in the construction industry that includes the planning, feasibility study, project management (PM), front end engineering and design (FEED), detail design, procurement, construction, supervision, and operation. Among these engineering activities, FEED is defined as a comprehensive design practice in the early design phase focused on conceptual design and basic design. It is a particularly influencing area that determines the competitiveness of procurement and construction capability of construction firms (KNIN 2013). Nevertheless, previous studies in FEED have been limited to the design process, deliverable, or particular management technique (e.g. system engineering, collaboration, information etc.). In this context, the purpose of this study is to propose a comprehensive FEED business process structure for project management of thermal power plant construction projects encompassing the entire project life cycle. And an assessment methodology for FEED functions was developed. It is expected that the proposed structure of FEED functions and FEED evaluation methodology will contribute to improvement of competitive capability of engineering, procurement, and construction (EPC) companies.

• Journal of Korean Biological Nursing Science
• /
• v.16 no.4
• /
• pp.259-266
• /
• 2014

Purpose: The purpose of this study was to analyze risk factors in predicting medical patients transferred to Intensive Care Unit (ICU) on the general ward. Methods: We reviewed retrospectively clinical data of 120 medical patients on the general ward and a Modified Early Warning Score (MEWS) between ICU group and general ward group. Data were analyzed with multivariate logistic regression and the area under the receiver operating characteristic curves using SPSS/WIN 18.0 program. Results: Fifty-two ICU patients and 68 general ward patients were included. In multivariate logistic regression, the MEWSs (Odds Ratio [OR], 1.91; 95% confidence interval [CI], 1.32-2.76), sequential organ failure assessment score (OR, 1.28; 95% CI, 1.10-1.72), $PaO_2/FiO_2$ ratio (OR, 0.98; 95% CI, 0.98-0.99), and saturation (OR, 0.93; 95% CI, 0.88-0.99) were predictive of ICU transfer. The sensitivity and the specificity of the MEWSs used with a cut-off value of six were 80.8% and 70.6% respectively for ICU transfer. Conclusion: These findings suggest that early prediction and treatment of patients with high risk of ICU transfer may improve the prognosis of patients.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.209-217
• /
• 2004

Evaluation of dementia in patients with early symptoms of cognitive decline is clinically challenging, but the need for early, accurate diagnosis has become more crucial, since several medication for the treatment of mild to moderate Alzheimer' disease are available. Many neurodegenerative diseases produce significant brain function alteration even when structural imaging (CT or MRI) reveal no specific abnormalities. The role of PET and SPECT brain imaging in the initial assessment and differential diagnosis of dementia is beginning to evolve vapidly and growing evidence indicates that appropriate incorporation of PET into the clinical work up can improve diagnostic and prognostic accuracy with respect to Alzheimer's disease, the most common cause of dementia in the geriatric population. in the fast few years, studios comparing neuropathologic examination with PET have established reliable and consistent accuracy for diagnostic evaluations using PET - accuracies substantially exceeding those of comparable studies of diagnostic value of SPECT or of both modalities assessed side by side, or of clinical evaluations done without nuclear imaging. This review deals the role of functional brain imaging techniques in the evaluation of dementias and the role of nuclear neuroimaging in the early detection and diagnosis of Alzheimer's disease.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.224-227
• /
• 2000

Gunshot wounds to the face are often dramatic at the time of presentation. Although care must be individualized, protocol approach helps the clinician rapidly evaluate patient and plan treatment. Early X-ray films help to determine the precise trajectory. Rapid neurologic assessment and early CT scanning based on physical examination ot trajectory will allow for identification of even occult injuries early. Lead poisoning arising from bullet lead in the synovial cavity of the hip, synovial cavity of the chest and pleural space have been reported. A combination of surgical debridement and chelation therapy with oral succimer produce a satisfactory outcome. We have managed a patient with Lt facial gunshot wound and Lt mandible angle fracture by open reduction of angle fracture and surgical removal of remnant bullet and medially advanced cheek skin flap. We have obtained good result and report this case with review of literatures.

• Journal of Korea Foundry Society
• /
• v.23 no.5
• /
• pp.257-267
• /
• 2003

In early solidification during the continuous casting of steel slabs, the formation of oscillation marks on the surface of slabs was mainly affected by carbon contents and casting conditions. The control of oscillation mark is required for the HCR(Hot Charged Rolling) process because the deep oscillation marks seriously deteriorate the surface qualities of steel slabs. The metallographic study has revealed that the oscillation mark can be classified principally according to the presence or absence of a small 'subsurface hook' and the depth of the oscillation marks in the subsurface structure at the basis of individual oscillation marks. The subsurface hook of oscillation marks was either straight or curved. When the amount of overflow was small and the subsurface hook was formed in the top of oscillation marks, the subsurface hook was straight and the oscillation mark was shallow. The oscillation marks without subsurface hook have small early solidification shell and were formed wide. The actual negative strip time$(t_N)$ was changed by the effect of meniscus level fluctuation Therefore irregular early solidification shell and oscillation mark were formed.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.605-618
• /
• 2021

The use of human resources determines the success of enterprises. This study applies the questionnaire design method to analyze the relationship between job stress, job satisfaction, and job performance, noting that few studies have comparatively examined these variables between industries, especially between high-tech and traditional industries. The proposed assessment model in this study can facilitate decision-makers' ability to make the optimal business decisions through their personnel systems, thereby improving employee satisfaction and increasing job performance. This study found that in the traditional and high-tech industries, some demographic variables have significant differences in the job stress, job satisfaction and job performance, but the demographic variables that can significantly affect the differences in these job's variables are differences between industries. This study acknowledges that job stress and performance have a significantly negative correlation, and traditional industries will have more stress factors than high-tech industries. In addition, support for traditional industries exist in job satisfaction and performance has a significantly positive correlation, but not in high-tech industries. Job stress for performance has a significantly negative correlation in two industries. This study reconfirmed the relationship between job stress, satisfaction and performance, found some differences in this relationship and the respective industrial characteristics.

• Journal of Digital Convergence
• /
• v.19 no.5
• /
• pp.365-373
• /
• 2021

This work aims to derive data-based requirements by analyzing the importance and performance of media literacy in early childhood animations. For this, a survey was conducted on parents with young children after drawing questions of assessment items through expert focus group interviews (FGI). The analytical instruments, Borich Needs Formula formulation and The Locus for Focus Model were used together to improve accuracy. Based on the results, it is meaningful in that it recognized the demand of the inmates for children's education animation and prepared systematic indicators for it.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.606-615
• /
• 2009

Estimating the reasonable construction-cost according to the construction phase in public construction is an important element for securing and executing a national budget efficiently. As a general rule, the predetermined cost of construction is estimated at the end of the design of the target structure. Therefore, it seems to be a considerably difficult problem to estimate the approximate cost of construction, only with its basic information of the bridge in the design planning phase and the early design stage where we can not have specific detailed-section of the target structure. In this paper, we present the calculation of construction-cost in the planning phase based on the analysis of factors affecting the cost of construction conducted in the previous study. Beside, to estimate the cost of construction in early design phase, we would like to present the calculation of construction-cost in the early design phase by executing the analysis of data collected from 61 steel box bridges. It was found from the result of study that the estimated cost of construction gained by the calculation of construction-cost in this paper reduces the error between the real cost of construction and that by the existing method of using.