• 응용통계연구
• /
• 제35권6호
• /
• pp.725-737
• /
• 2022

통계적 공정 모니터링에서 관리 상태일 때 품질 특성치의 모수값은 하나의 값으로 지정하는 경우가 대부분이다. 그러나 관리 상태로부터 공정 모수의 작은 변화는 실제적으로 크게 중요하지 않은 경우, 품질 특성치의 모수 영역은 관리 상태, 무관심, 그리고 이상 상태의 세 영역으로 구성될 수 있다. 이 논문에서는 3개의 모수 영역이 있는 공정에 적용할 수 있는 두 가지 지수가중 이동평균(exponentially weighted moving average; EWMA) 관리도 절차를 제안하고, 제안된 절차의 성능을 Shewhart 관리도 및 누적합(cumulative sum; CUSUM) 관리도와 비교하여 그 효율을 평가하였다.

• 응용통계연구
• /
• 제35권2호
• /
• pp.203-215
• /
• 2022

본 논문에서는 연속적으로 관측되는 개별 관측치에 대하여, 모평균의 변화를 모니터링하는 데 적용 가능한 관리도에 대하여 고찰해 보고자 한다. 가장 대표적인 관리도로 슈하르트의 X 관리도, 지수가중이동평균 관리도와 이들의 결합관리도에 관하여 살펴보고 모의실험을 통하여 각 관리도의 성능을 비교 평가해 보고자 한다. 또한, 실제 자료분석을 통해 실질적인 문제에서 관리도를 어떻게 사용해야 하는지 알아보고, 각 관리도의 문제점에 대하여 살펴보기로 한다.

• 품질경영학회지
• /
• 제33권4호
• /
• pp.117-122
• /
• 2005

Variable sampling rate(VSR) scheme varies the sampling rate for the current sample depending on the previous value of the control statistic. In this paper, we propose EWMA control charts with variable parameter(VP) scheme, which allows both the sample rate(the sample size or the sampling interval) and the weight to vary. We investigate the effectiveness of the VP scheme relative to the fixed parameter(FP) scheme and the VSR scheme in EWMA control charts. It is shown that using the VP scheme gives some improvements to the ability in detecting small and moderate shifts in the process normal mean.

• 품질경영학회지
• /
• 제24권1호
• /
• pp.73-86
• /
• 1996

Adaptive EWMA(Exponentially Weighted Moving Average)-x control chart using the Kalman gain recursive average is designed. The designed control chart is effective to on-line process monitoring as continuous flow processes. Performance evaluation between the designed control chart and traditional one is implemented. For this, ARL(Average Run Length) is adopted as a criterion. Results show that the designed adaptive EWMA-x control chart has shorter ARL than EWMA-x control chart when process mean is shifted. This model can be extended to process prevention control. The methodology proposed in this research is turned out to show the high performance than that of the given methodologies.

• 품질경영학회지
• /
• 제32권1호
• /
• pp.92-101
• /
• 2004

Tris paper present an economic statistical design which have statistically constraints for the optimal design of an EWMA control charts with variable sampling interval. Cost function use that proposed by Lorenzen and Vance, and the optimal design parameters include the sample size, control limit width, sampling interval, EWMA weight value. Comparisons between VSI EWMA control charts optimal economic design and optimal economic statistical designs show the following fact. Although have demerits which are more costly than economic design, have merits which to detect shifts more efficiently and to improve statistical performance.

• 품질경영학회지
• /
• 제26권1호
• /
• pp.108-125
• /
• 1998

The EWMA(Exponentially Weighted Moving Average) has recently received a great deal of attention in the quality control literature as a process monitoring tool on the shop floor of manufacturing industires, since it is easy to plot, to interpret, and its control limits are easy to obtain. Most a, pp.ications of the EWMA for process monitoring have concentrated on the problem of detecting shifts of a process mean and a process standard deviation with ARL(Average Run Length) properties. But there may be the necessity of controlling linearity on product quality such as the correlation coefficient to the process operator. Control managers may want to protect the increase of a process correlation coefficient value, such as 0, between two variables of interest. However, there are few studies concerned on this part. Therefore, we propose EWMA models for a process correlation coefficient using two transformed statistics, T-statistic and (Fisher's) Z-statistic. We also present some results of simulation by SAS/IML and compare two models.

• 산업경영시스템학회지
• /
• 제31권4호
• /
• pp.114-120
• /
• 2008

The control chart is widely used statistical process control(SPC) tool that searches for assignable cause of variation and detects any change of process. Generally, ${\bar{X}}-R$ control chart and ${\bar{X}}-S$ are most frequently used. When the production run is short and process parameter changes frequently, it is difficult to monitor the process using traditional control charts. In such a case, the coefficient of variation (CV) is very useful for monitoring the process variability. The CV control chart is an effective tool to control the mean and variability of process simultaneously. The CV control chart, however, is not sensitive at small shift in the magnitude of CV. In this paper, we propose an CV-EWMA (exponentially weighted moving average) control chart which is effective in detecting a small shift of CV. Since the CV-EWMA control chart scheme can be viewed as a weighted average of all past and current CV values, it is very sensitive to small change of mean and variability of the process. We suggest the values of design parameters and show the results of the performance study of CV-EWMA control chart by the use of average run length (ARL). When we compared the performance of CV-EWMA control chart with that of the CV control chart, we found that the CV-EWMA control chart gives longer in-control ARL and much shorter out-of-control ARL.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.643-644
• /
• 2013

• 품질경영학회지
• /
• 제22권4호
• /
• pp.13-27
• /
• 1994

This study is concerned with design of EWMA control charts for counted data. Control charts for the fraction defective and the number of defects are designed. Performance analysis is accomplished for validity of the designed EWMA control charts. Average run length(ARL) is adopted as a criterion for comparison. Simulation results show that the designed EWMA control charts have shorter ARL than pn, p and c control charts when the fraction nonconforming or the average defect number are shifted. This means that the designed control charts can detect the out of -control state of the process more fastly than the traditional control charts.

• Journal of the Korean Data and Information Science Society
• /
• 제21권4호
• /
• pp.681-688
• /
• 2010

통계적 공정관리에서 결점수를 모니터링 하는데는 c-관리도가 사용된다. 전통적인 c-관리도는 표본에서 결점의 발생은 포아송분포를 따른다는 가정 하에서 만들어진다. 포아송 분포에 대한 가정이 맞지 않을 때에는 X-관리도가 사용될 수 있다. 지수가중이동평균관리도는 공정의 작은 변화를 찾는 데 유용한 것으로 알려져 있다. 본 논문에서는 다양한 카즈분포족으로부터 생성된 계수자료에 대하여 3시그마 X-관리도와 지수가중이동평균관리도의 효율을 평균 런의 길이에 근거하여 비교한다. 즉, 자료가 어떤 분포로부터 생성되었는지 알 수 없을 때, X-관리도와 지수가중이동평균관리도를 비교하는 것이다.