• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.338-343
• /
• 1998

This study is to select appropriate probability distributions for ten days evaporation data for the purpose of representing statistical characteristics of real evaporation data in Korea. Nine probability distribution functions were assumed to be underlying distributions for ten days evaporation data of 20 stations with the duration of 20 years. The parameter of each probability distribution function were estimated by the maximum likelihood approach, and appropriate probability distributions were selected from the goodness of fit test. Log Pearson type III model was selected as an appropriate probability distribution for ten days evaporation data in Korea.

• 대한전자공학회논문지
• /
• 제24권6호
• /
• pp.980-985
• /
• 1987

The thin metal films of Cr, Al, Mn and were made in various evaporation rates with 100\ulcornerthickness under 2x10**-9 bar vacuum level. We analized and discussed the relationships between changes of structure, morphology and sheet resistance, light transmittance for the corresponding evaporation rates. As the evaporation rates were decreased at higher rates, grain sizes of all film were decreased, however both of the sheet resistance and light transmittance were increased. At lower evaporation rate, films of Cr and Cu porduced non-stoi-chiometric oxides but Al an Mn showed up amorphous structures.

• 한국초등과학교육학회지:초등과학교육
• /
• 제17권1호
• /
• pp.89-103
• /
• 1998

We study that what kind of the concepts of evaporation and condensation students of elementary school have. The results are following. (1) The students have simple concepts of evaporation on natural circumstance. However, they don't understand about various effect on evaporation. (2) They don't know where the evaporized water is comming from. (3) They have experiences on observing condensation of wale. (70%), however don't know that the water is evaporized in the air. (4) They have more understanding about evaporation, more correct concepts on condensation in circulation of water.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1168-1170
• /
• 2008

For OLED to be a key role in the television market, a manufacturing evaporation system with robustness and high throughput is indispensable. ANS is currently developing manufacturing equipments for OLED TVs. ANS's latest progress of a vertical high throughput in-line evaporation system for large substrate will be presented.

• 한국수자원학회논문집
• /
• 제50권1호
• /
• pp.37-53
• /
• 2017

증발접시 증발량의 경우 저수지 증발량을 산정하는 간접적인 방법으로 유용하게 적용되고 있다. 따라서 본 연구에서는 이용할 수 있는 기상자료가 제한적인 경우에 기온자료만을 이용하여 증발접시 증발량을 산정하는 식을 제안하였다. 이를 위해서 전국 12개 지역에서 관측된 증발접시 증발량과 비교를 통해 제안식을 유도하였다. 또한 전국 44개 지역에 대해서 본 연구에서 제안된 증발접시 증발량 산정식을 다른 기온자료에 기초한 식들뿐만 아니라, 여러 종류의 기상자료(기온, 풍속, 습도, 일조시간)를 필요로 하는 식들과 비교하여 적용성을 파악하였다. 연구결과에 의하면 본 연구에서 제안된 증발량 산정식들은 다른 기온자료에 기초한 식들과 비교하여 전반적으로 양호한 증발접시 증발량 산정결과를 보였다. 본 연구에서 제안된 증발량 산정식의 경우 우리나라 56개 연구지역 대부분에서 전반적으로 양호한 증발접시 증발량 산정결과를 보였다. 따라서 본 연구에서 수정 제안된 기온자료만을 이용한 증발접시 증발량 산정식들은 우리나라에서 이용할 수 있는 기상자료가 제한적인 경우에 특히 적용성이 있는 것으로 판단된다. 추후에는 저수지에서 관측된 기온 및 증발접시 증발량 자료를 바탕으로 저수지 증발량 산정을 위한 제안식들의 적용성 검토연구가 필요하다.

• 한국연소학회지
• /
• 제13권3호
• /
• pp.17-23
• /
• 2008

The spray combustion and spray cooling depends on droplet evaporation. So, evaporation model for spray has been requested and lots of investigation has been done and various reliable models have been developed also for last few decades. In the present study, One dimensional quasi-steady spherically symmetric droplet evaporation model for micro-gravity is developed. The gas phase was assumed as steady state and the thermophysical properties are calculated as a function of temperature, pressure and composition and the properties used in the model was validated by NIST web data and overall evaporation history results was compared with experimental results by Nomura and Qasim and gave satisfactory agreements. Through this model, diverse phenomenon was investigated, especially regarding the effects of ambient pressure and temperature. The effects of pressure for the droplet evaporation time were studied. The high pressure increased the droplet surface temperature and made effect on the evaporation time depend on atmospheric temperature. The role of the ambient temperature was investigated and explained. The basic investigation for the evaporation process according to variation of droplet diameter and surface temperature were also investigated and the well-known phenomena, like D-square-law, were reported, too.

• 열처리공학회지
• /
• 제18권6호
• /
• pp.375-382
• /
• 2005

This paper presents the results of experimental investigation for the effect of heat conduction on the evaporation cooling of water droplet in the process of heat treatment. The experiments are mainly focused on the surface temperature, the surface roughness and the droplet diameter at aluminum. The range of surface temperature is from $80^{\circ}C$ to $140^{\circ}C$, surface roughness is from $R_a=0.18{\mu}m$ to $R_a=1.36{\mu}m$ and droplet diameter is from 2.4 mm to 3.0 mm. The results show that the total evaporation time is shorter for the larger surface roughness, the time averaged heat flux has maximum value for the larger surface roughness and exist the critical heat flux. The total evaporation time has a big influence on the evaporation region for the smaller droplet size, but the total evaporation time has not influence on the nuclear boiling region.

• Transactions on Electrical and Electronic Materials
• /
• 제6권6호
• /
• pp.272-275
• /
• 2005

We studied the control of pretilt angles for homeotropic aligned nematic liquid crystal (NLC) on SiOx thin film surface by $45^{\circ}$ evaporation method with electron beam system. The uniform vertical LC alignment on. the SiOx thin film surfaces with electron beam evaporation was achieved. It is considered that the LC alignment on SiOx thin film by $45^{\circ}$ electron beam evaporation is attributed to elastic interaction between LC molecules and micro-grooves at the SiOx thin film surface created by evaporation. The pretilt angles of about $3.5^{\circ}$ in aligned NLC on SiOx thin film surfaces by electron beam evaporation of $45^{\circ}$ were measured. Consequently, the high pretilt angles of the NLC on the SiOx thin film by $45^{\circ}$ oblique electron beam evaporation method can be achieved.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.63-69
• /
• 2007

The evaporation pressure drop of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and an evaporator (test section). The test section consists of a smooth, horizontal stainless steel tube of 4.57 mm inner diameter. The experiments were conducted at saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$, and heat flux of 10 to $40kW/m^2$. The test results showed that the evaporation pressure drop of $CO_2$ are highly dependent on the vapor quality, heat flux and saturation temperature. The measured pressure drop during the evaporation process of $CO_2$ increases with increased mass flux, and decreased saturation temperature. The evaporation pressure drop of $CO_2$ is much lower than that of R 22. In comparison with test results and existing correlations, the best fit of the present experimental data is obtained with the previous correlation. But existing correlations failed to predict the evaporation pressure drop of $CO_2$. Therefore, it is necessary to develop reliable and accurate predictions determining the evaporation pressure drop of $CO_2$ in a horizontal tube.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.21-29
• /
• 2018

In many companies handling flammable liquids, explosion-proof electrical equipment have been installed according to the Korean Industrial Standards (KS C IEC 60079-10-1). In these standards, hazardous area for explosive gas atmospheres has to be classified by the evaluation of the evaporation rate of flammable liquid leakage. The evaporation rate is an important factor to determine the zones classification and hazardous area distance. However, there is no systematic method or rule for the estimation of evaporation rate in these standards and the first principle equations of a evaporation rate are very difficult. Thus, it is really hard for industrial workplaces to employ these equations. Thus, this problem can trigger inaccurate results for evaluating evaporation range. In this study, empirical models for estimating an evaporation rate of flammable liquid have been developed to tackle this problem. Throughout the sensitivity analysis of the first principle equations, it can be found that main factors for the evaporation rate are wind speed and temperature and empirical models have to be nonlinear. Polynomial regression is employed to build empirical models. Methanol, benzene, para-xylene and toluene are selected as case studies to verify the accuracy of empirical models.