• Title/Summary/Keyword: EVALUATION FACTOR

Search Result 5,867, Processing Time 0.037 seconds

Oversea & Domestic Case Studies on Excavation Damaged Zone for Deep Geological Repository for Spent Nuclear Fuel (사용후핵연료 심층 처분장을 위한 국내외 굴착손상영역 사례연구)

  • Jeonghwan Yoon;Ki-Bok Min;Sangki Kwon;Myung Kyu Song;Sean Seungwon Lee;Tae Young Ko;Hoyoung Jeong;Youngjin Shin;Jaehoon Jung;Juhyi Yim
    • Tunnel and Underground Space
    • /
    • v.34 no.1
    • /
    • pp.15-27
    • /
    • 2024
  • In this case study, detailed survey of the Excavation Damaged Zone (EDZ) evaluation for the deep geological repository for high level nuclear waste was conducted. Oversea and Domestic case studies were compiled and investigated. EDZ is considered a crucial factor in the performance assessment of spent fuel disposal, leading to numerous studies worldwide aiming to understand the characteristics of the EDZ and quantitatively assessment of its extent through field and laboratory tests at Underground Research Laboratory (URL) sites. To enhance the understanding of EDZ, this study begins with defining and exploring the history of EDZ, compiling factors influencing EDZ, and summarizing the impacts caused by EDZ. Subsequently, an analysis of EDZ and rock properties is performed, followed by presenting generalized outcomes, limitations drawn from previous research, and proposing future research directions.

Evaluation of the CNESTEN's TRIGA Mark II research reactor physical parameters with TRIPOLI-4® and MCNP

  • H. Ghninou;A. Gruel;A. Lyoussi;C. Reynard-Carette;C. El Younoussi;B. El Bakkari;Y. Boulaich
    • Nuclear Engineering and Technology
    • /
    • v.55 no.12
    • /
    • pp.4447-4464
    • /
    • 2023
  • This paper focuses on the development of a new computational model of the CNESTEN's TRIGA Mark II research reactor using the 3D continuous energy Monte-Carlo code TRIPOLI-4 (T4). This new model was developed to assess neutronic simulations and determine quantities of interest such as kinetic parameters of the reactor, control rods worth, power peaking factors and neutron flux distributions. This model is also a key tool used to accurately design new experiments in the TRIGA reactor, to analyze these experiments and to carry out sensitivity and uncertainty studies. The geometry and materials data, as part of the MCNP reference model, were used to build the T4 model. In this regard, the differences between the two models are mainly due to mathematical approaches of both codes. Indeed, the study presented in this article is divided into two parts: the first part deals with the development and the validation of the T4 model. The results obtained with the T4 model were compared to the existing MCNP reference model and to the experimental results from the Final Safety Analysis Report (FSAR). Different core configurations were investigated via simulations to test the computational model reliability in predicting the physical parameters of the reactor. As a fairly good agreement among the results was deduced, it seems reasonable to assume that the T4 model can accurately reproduce the MCNP calculated values. The second part of this study is devoted to the sensitivity and uncertainty (S/U) studies that were carried out to quantify the nuclear data uncertainty in the multiplication factor keff. For that purpose, the T4 model was used to calculate the sensitivity profiles of the keff to the nuclear data. The integrated-sensitivities were compared to the results obtained from the previous works that were carried out with MCNP and SCALE-6.2 simulation tools and differences of less than 5% were obtained for most of these quantities except for the C-graphite sensitivities. Moreover, the nuclear data uncertainties in the keff were derived using the COMAC-V2.1 covariance matrices library and the calculated sensitivities. The results have shown that the total nuclear data uncertainty in the keff is around 585 pcm using the COMAC-V2.1. This study also demonstrates that the contribution of zirconium isotopes to the nuclear data uncertainty in the keff is not negligible and should be taken into account when performing S/U analysis.

Gross, organoleptic and histologic assessment of cadaveric equine heads preserved using chemical methods for veterinary surgical teaching

  • Rodrigo Romero Correa;Rubens Peres Mendes;Diego Darley Velasquez Pineros;Aymara Eduarda De Lima;Andre Luis do Valle De Zoppa;Luis Claudio Lopes Correia da Silva;Ricardo de Francisco Strefezzi;Silvio Henrique de Freitas
    • Journal of Veterinary Science
    • /
    • v.25 no.2
    • /
    • pp.29.1-29.11
    • /
    • 2024
  • Background: Preservation of biological tissues has been used since ancient times. Regardless of the method employed, tissue preservation is thought to be a vital step in veterinary surgery teaching and learning. Objectives: This study was designed to determine the usability of chemically preserved cadaveric equine heads for surgical teaching in veterinary medicine. Methods: Six cadaveric equine heads were collected immediately after death or euthanasia and frozen until fixation. Fixation was achieved by using a hypertonic solution consisting of sodium chloride, sodium nitrite and sodium nitrate, and an alcoholic solution containing ethanol and glycerin. Chemically preserved specimens were stored at low temperatures (2℃ to 6℃) in a conventional refrigerator. The specimens were submitted to gross and organoleptic assessment right after fixative solution injection (D0) and within 10, 20, and 30 days of fixation (D10, D20, and D30, respectively). Samples of tissue from skin, tongue, oral vestibule, and masseter muscle were collected for histological evaluation at the same time points. Results: Physical and organoleptic assessments revealed excellent specimen quality (mean scores higher than 4 on a 5-point scale) in most cases. In some specimens, lower scores (3) were assigned to the range of mouth opening, particularly on D0 and D10. A reduced the range of mouth opening may be a limiting factor in teaching activities involving structures located in the oral cavity. Conclusions: The excellent physical, histologic, and organoleptic characteristics of the specimens in this sample support their usability in teaching within the time frame considered. Appropriate physical and organoleptic characteristics (color, texture, odor, and flexibility) of the specimens in this study support the use of the method described for preparation of reusable anatomical specimens.

Evaluation of the operational efficiency of major coastal ports in China based on the PCA-DEA model (PCA-DEA 모델을 기반으로 한 중국 주요연안 항만의 운영 효율성 평가)

  • Haiqing Zhang;Hyangsook Lee
    • Journal of Korea Port Economic Association
    • /
    • v.40 no.1
    • /
    • pp.87-118
    • /
    • 2024
  • Coastal ports play an essential role in developing a country and a city. Port efficiency is an important factor affecting port trade, and the importance of port efficiency for port performance has been recognized in previous literature. DEA (Data Envelopment Analysis) and SFA (Stochastic Frontier Analysis) are widely used in this field of research. However, these two methods are limited in selecting input and output variables. In addition, the literature studies on Chinese coastal ports mainly focus on the study of port clusters in local areas, which lacks a holistic approach and generally lacks up-to-date data. Therefore, to fill the gap in this area of research, this paper introduces a model combining principal component analysis and data envelopment analysis to analyze the operational efficiency of the top 17 coastal ports in China in terms of throughput based on the most recent data available in 2021. This paper identifies container throughput as the output variable, and 13 second indicators are selected as input variables from four primary indicators: land, capital, labor, and infrastructure. Four principal components were selected from 13 second indicators using PCA.After that, DEA (BBC) and DEA (CCR) were used to analyze the 17 ports, among which five were Shanghai, Ningbo-Zhoushan, Guangzhou, Xiamen, and Dongguan, respectively, DEA efficient, and the remaining 12 ports were non-DEA efficient. Finally, improvement directions for each port are derived, and brief suggestions are made. This paper provides some reference value for developing and constructing coastal ports in China.

Residual Characteristics and Processing Factors of Difenoconazole in Fresh Ginseng and Processed Ginseng Products (인삼 및 가공품 중 difenoconazole의 잔류특성 및 가공계수)

  • Noh, Hyun-Ho;Lee, Kwang-Hun;Lee, Jae-Yun;Lee, Eun-Young;Park, Young-Soon;Park, Hyo-Kyoung;Oh, Jae-Ho;Im, Moo-Hyeog;Lee, Yong-Jae;Baeg, In-Ho;Kyung, Kee-Sung
    • The Korean Journal of Pesticide Science
    • /
    • v.16 no.1
    • /
    • pp.35-42
    • /
    • 2012
  • This study was carried out to elucidate the residual characteristics and calculate processing factors of difenoconazole in ginseng and its processed products, such as dried ginseng, red ginseng and their water and alcohol extracts. The pesticide was sprayed onto the ginseng according to its pre-harvest intervals in 2009 (four-year-old ginseng) and 2010 (five-year-old ginseng). Harvested ginseng was processed to dried ginseng, red ginseng and their extracts according to the commercially well-qualified conventional methods provided by the Korea Ginseng Corporation. Limit of detection (LOD) and limit of quantitation (LOQ) of difenoconazole in fresh ginseng were 0.001 and 0.003 mg/kg, respectively. In case of processed ginseng products, their levels were 0.002 and 0.007 mg/kg, respectively. Concentration of difenoconazole in both fresh ginseng and its processed products increased with the experimental period. Processing factors, calculated as a ratio of difenoconazole concentration in processed products to fresh ginseng were found to be 1.71 to 2.17 and 1.62 to 2.03 in case of dried and red ginseng, respectively, while those for their extracts ranged from 1.76 to 2.98. In case of five-year-old dried ginseng and red ginseng as well as their extracts, the ranges of processing factor of difenoconazole were found to be 2.9 to 3.1, 1.9 to 2.2 and 2.4 to 4.7, respectively.

Dosimetric and clinical review on the application of TOMO_edge mode (토모테라피 Edge 모드를 이용한 임상적 유용성 고찰)

  • Kim, Lizzy
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.26 no.2
    • /
    • pp.177-182
    • /
    • 2014
  • Purpose : The goal of this study was to compare and analysis the dose distribution and treatment time between Tomotherapy planning with fixed jaw(FJ) and dynamic jaw(DJ). Materials and Methods : Seven patients were selected in the study including five common clinical cases(brain, head and neck(HN), lung, prostate, spine). 1) Helical Tomotherapy plans with FJ and DJ were generated with the same planning parameters such as Modulation factor, Pitch and Field width. 2) Tomo_edge plans with a larger field width were generated to compare to conventional HT delivery with fixed jaw. Dosimetric evaluation indices for target coverage are Dmin, Conformity index(CI) and for whole body including target are $V_{10%}$, $V_{25%}$, $V_{50%}$, $V_{75%}$ using Dose-volume histogram(DVH). Also, Treatment time and Cumulative MU were used for clinical review on Tomo_edge. Results : In case of using the same field width of Tomotherapy planning with FJ and DJ, the averaged variations were $V_{10%}$: -11.91%, $V_{25%}$: -7.6%, $V_{50%}$ :-4.75%, $V_{75%}$: -1.04%. Tomo_edge with a larger field width provides the averaged variations for target coverage: Dmin: -0.72%, CI: -1.25% and also shows the tendency of a sharp $V_{x%}$ decline in low dose area. The clinical improvements in the larger field width with DJ were observed in the treatment time, ranging from -51.21% to -15.11, and the Cumulative MU decrease, ranging from -57.74% to -15.31%. Conclusion : Target coverage achieved by FJ and DJ with the same field width has little differences. But integral doses on whole body efficiently decreased. Compared to the conventional HT delivery, Tomo_edge with a larger field width presents a little worse target coverage. However, it provides faster treatment delivery and improved cranial-caudal target dose conformity. Therefore, Tomo_edge mode is efficient in improving the treatment time and integral dose while maintaining comparable plan quality in clinic.

Evaluation of dietary behavior and nutritional status of elementary school students in Jeju using nutrition quotient (어린이 영양지수 (nutrition quotient)를 이용한 제주 지역 일부 초등학생의 식습관 및 영양 상태 평가)

  • Boo, Mi Na;Cho, Su Kyung;Park, Kyong
    • Journal of Nutrition and Health
    • /
    • v.48 no.4
    • /
    • pp.335-343
    • /
    • 2015
  • Purpose: The aim of this study was to evaluate the food behavior and nutritional status of elementary school students in the Jeju area using Nutrition Quotient (NQ). Methods: The subjects were 440 students (235 boys and 205 girls) in the fifth and sixth grade at four elementary schools located in Jeju. Demographic, lifestyle, and environmental information was collected using a self-reported questionnaire. The food behavior checklist for children's Nutrition Quotient (NQ), consisting of 19 items, and nutrition education related information were also obtained. Results: The mean score of the children's NQ was poor, reaching 60.3 points. The percentage distribution of NQ grade was 19.8% (lowest), 18.6% (low), 45.0% (medium), 10.7% (high), and 5.9% (highest) and the factor scores for balance, diversity, abstinence, regularity, and practice were 56.6, 68.4, 71.3, 57.4, and 54.8 points, respectively. Compared with the NQ cut-off points for defining malnutrition (balance; 57, diversity; 87, abstinence; 66, regularity; 69, and practice; 67 point), average score of abstinence factor was only above the cut-off point and scores of the other factors were below the cut-off point. Subjects with higher NQ scores tended to have higher levels of exercise activity (p < 0.001), frequency of family meals (p < 0.01), and father's educational levels (p < 0.01) compared to those with lower NQ score. NQ score showed positive association with nutrition education experience and practice (p < 0.001). Conclusion: NQ score of elementary school students residing in Jeju was lower than the national average. More opportunities should be provided for participation in nutrition education, which incorporates a range of program strategies, as well as communication and education activities.

Evaluation of Prognostic Factors in Corrected Transposition of the Great Arteries at Mid-term Follow-up (수정 대혈관 전위 환자에서 예후에 영향을 주는 인자들에 대한 중기적 고찰)

  • Song, Young-Hwan;Kwon, Hyok-Joo;Kim, Gi-Beom;Kang, Soo-Jung;Bae, Eun-Jung;Noh, Chung-Il;Yun, Yong-Soo;Lee, Jeong-Ryul;Kim, Yong-Jin;Rho, Joon-Ryang
    • Clinical and Experimental Pediatrics
    • /
    • v.46 no.2
    • /
    • pp.154-161
    • /
    • 2003
  • Purpose : The prognosis of patients with corrected transposition of the great arteries(C-TGA) is variably affected by associated intracardiac defects, systemic right ventricular function, tricuspid valve competence, and conduction disturbances. This study aims to evaluate the importance of those factors at mid-term follow-up. Methods : Medical records of 94 patients(males 58, females 36; mean age at last follow-up, $12{\pm}9$ years; mean follow-up duration, $9{\pm}6.4$ years) diagnosed between January 1980 and May 2002 at Seoul National University Children's Hospital were studied retrospectively. Results : Among 94 patients, operations were performed in 72 patients(classic operations in 55; double switch operations in 17). Among prognostic factors including associated intracardiac anomalies(at least moderately severe tricuspid insufficiency(TI), ventricular septal defect, pulmonary stenosis and pulmonary atresia), intracardiac operation and complete atrioventricular block, TI was the only significant factor for death(P=0.001), and in turn, Ebstein anomaly and high grade atrioventricular block predicted TI. 20-year survival without TI was 77%, but only 35% with TI(P=0.0002); excluding perioperative death, the 20-year survival rates with and without TI were 48% and 87% respectively(P=0.008). There was no statistical difference in 20-year survival rate or association with TI between classic and double switch operation. Conclusion : TI was the major prognostic factor for C-TGA and was associated with Ebstein anomaly and high grade atrioventricular block at mid-term follow-up. Long-term follow-up is required to evaluate other factors, including double switch operations and associated intracardiac defects more exactly.

A Study on the Product Design Case Study of Differential Design Concept (차별화 된 디자인 개념의 제품디자인 사례 연구)

  • 이덕상;한세준;김홍규;조철희
    • Archives of design research
    • /
    • v.17 no.2
    • /
    • pp.335-350
    • /
    • 2004
  • Design takes concrete form from the things which are not yet exist to the molded reality. Creation of value which is accompanied by the rational value could be possible only through the searching examination of the basic concept. All designs are under circumstances because the results and the character of the problems are different under the given conditions and circumstances which are the characteristic of the design. The aim of this study is searching for the differential design conce- pt which is the most appropriate and reasonable in the basic design process in which the phase of the analysis, synthesis and evaluation of the problem. First of all the pursuit value of the times and the change of the view point of value of the product design. How the pursuit value of times were searched and analyzed. Analyze the successful product design realization of the typical trend of the modern design which are 3-2. function-focused design, 3-3. emotion-centered design, 3-4. image communicative design through the metaphor, 3-5. environmental affinity design. On the base of the case analysis how to apply the differential design concept which is coming as a trend in the future society which are sustainable developing society was examined closely. The outcome through the analysis of the success cases are as follows, \circled1 the value of the spirit of the times should be emphasized as the design image, \circled2 environmental appropriateness should be taken into consideration as the first primary factor, \circled3 the realization of value of the fulfillment of differential consumer's needs, \circled4 lead to prolong the life cycle of the product, \circled5 promote the sustaining growth of enterprise, \circled6 user-centered product value should be the first consideration. \circled7 It is necessary to overcome the cultural andinguistic barriers and to reflect the metaphor which people remember well. \circled8 The application of human's true character should be decided beforehand. It is the commonness of values of times and customs. \circled9 The differentiated design concept which meets our mental satisfaction, not material one, will be required. In addition to this the creative and differentiated design concepts which are accompanied by the good design factor under the base of product could achieve the emotional consensus from the consumers. That is, the value of all designs should be estimated by the base of the humanism ' The human beings are the barometer of all things".ngs".uot;.

  • PDF

Evaluation of Radiation Exposure Dose for Examination Purposes other than the Critical Organ from Computed Tomography: A base on the Dose Reference Level (DRL) (전산화단층촬영에서 촬영 목적 부위와 주변 결정장기에 대한 피폭선량 평가: 선량 권고량 중심으로)

  • Lee, Seoyoung;Kim, Kyunglee;Ha, Hyekyoung;Im, Inchul;Lee, Jaeseung;Park, Hyonghu;Kwak, Byungjoon;Yu, Yunsik
    • Journal of the Korean Society of Radiology
    • /
    • v.7 no.2
    • /
    • pp.121-129
    • /
    • 2013
  • In this study measured patient exposure dose for purpose exposure area and peripheral critical organs by using optically stimulated luminescence dosimeters (OSLDs) from computed tomography (CT), based on the measurement results, we predicted the radiobiological effects, and would like to advised ways of reduction strategies. In order to experiment, OSLDs received calibration factor were attached at left and right lens, thyroid, field center, and sexual gland in human body standard phantom that is recommended in ICRP, and we simulated exposure dose of patients in same condition that equal exposure condition according to examination area. Average calibration factor of OSLDs were $1.0058{\pm}0.0074$. In case of left and right lens, equivalent dose was measure in 50.49 mGy in skull examination, 0.24 mGy in chest, under standard value in abdomen, lumbar spine and pelvis. In case of thyroid, equivalent dose was measured in 10.89 mGy in skull examination, 7.75 mGy in chest, 0.06 mGy in abdomen, under standard value in lumber spine and pelvis. In case of sexual gland, equivalent dose was measured in 21.98 mGy, 2.37 mGy in lumber spine, 6.29 mGy in abdomen, under standard value in skull examination. Reduction strategies about diagnosis reference level (DRL) in CT examination needed fair interpretation and institutional support recommending international organization. So, we met validity for minimize exposure of patients, systematize influence about exposure dose of patients and minimize unnecessary exposure of tissue.