• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.27-36
• /
• 2003

The Electro-Rheological (ER) fluid has been used to the ultraprecision polishing of single crystal silicon as new polishing slurry whose properties such as yield stress and particle structure changed with the application of an electric field. In this work, it is aimed to find the effective parameters in the ER fluid on material removal in the polishing system whose structure is similar to that of the simple hydrodynamic bearing. The generated pressure in the gap between a moving wall and a workpiece, as well as the electric field-induced stress of the mixture of ER fluid-abrasives, is evaluated experimentally, and their influence on the polishing of single crystal silicon is analyzed. Moreover, the behavior of abrasive and ER particles is described.

• Tribology and Lubricants
• /
• v.17 no.3
• /
• pp.216-220
• /
• 2001

This paper presents a parametric study and an optimal design of the ER-SFD supporting a rigid rotor system. An attempt is made to obtain the optimal design of an ER-SFD for a two degree-of-freedom rotor model. Such a simple model is used in order to get a better insight into the physics of the problem. A maximum whirl amplitude, supply pressure and voltage are considered, and a maximum whirl amplitude is minimized over a range of speeds and presented f3r some values of unbalance mass. The results presented in this paper provide important design information necessary to reduce a whirl amplitude of an ER-SFD.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.4
• /
• pp.377-380
• /
• 1999

Erbium (Er) doped $LiNbO_{3}(Er:LiNbO_{3})$ single crystal fibers were grown free of creacks along the c-axis by micro-pulling down method. The $Er^{3+}$ concentration was distributed homogeneously along the growth axis. The samples for optical characterization were cut from as-grown single crystal fibers and polished. When the 980nm light was incident on the sample, upconversion phenomena were observed at the green range of wavelength 510~570nm. In addition, the intensity of upconversion was remarkably increased by increasing the concentration of $Er_{2}O_{3}$ dopant in as-grown $Er:LiNbO_{3}$ crystals.

• Transactions of the Korean hydrogen and new energy society
• /
• v.4 no.2
• /
• pp.17-22
• /
• 1993

$ErCo_2$화합물에서 Co를 천이원소로 10%만큼 치환한 $Er(Co_{0.9}M_{0.1})_2$화합물(M=Cr, Mn, Fe, Ni, Cu)의 비정질화 온도를 측정해서 수소유기 비정질화에 영향을 미치는 인자에 대해 살펴보았다. 비정질화 온도는 치환원소의 원자반경과 비례함을 알 수 있었다 그러므로 $ErCo_2$ Laves 화합물에서 수소유기 비정질화에 영향을 미치는 인자는 확산과 밀접한 연관이 있는 원자의 크기임을 알 수 있다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.399-404
• /
• 1999

Electro-rheological(ER) fluids are suspensions which show an abrupt increase in rheological properties under electric fields. The rheological response is very rapid and reversible when the electric field is imposed and/or removed. Therefore, there are many practical applications using the ER fluids. The purpose of the present study is to examine the flow characteristics of electro-rheological fluids. The field-dependent yield stress are obtained from experimental investigation on the Bingham property of the ER fluid. Then the steady relationshup between pressure drop and flow rate of the ERF was two fixed parallel-plates was measured under application of an electric fields. The electrical and rheological properties of zeolite based electro-rheological fluids were reported.

• Tribology and Lubricants
• /
• v.25 no.3
• /
• pp.176-181
• /
• 2009

Aminated polyacrylonitrile as the new organic disperse phases of the anhydrous ER fluid has been synthesized and ER effect of the suspension composed of aminated polyacrylonitrile in silicone oil investigated. The suspension showed a typical ER response (Bingham flow behavior) upon application of an electric field. The shear stress for the suspension exhibited the dependence with a factor equals to 1.6 power on theelectric field. The current density and the conductivity of the of aminated polyacrylonitrile suspension increase with the electric field intensity and moreover the conductivity of the suspension is about 8 order of magnitude higher than that of the silicone oil. On the basis of the the results, aminated polyacrylonitrile suspension showed the ER flow behavior upon application of the electric field due to the polarizability of the branched amine polar group of the aminated polyacrylonitrile particles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.394-399
• /
• 1997

This paper presents a new concept of a semi-active suspension system for a commercial vehicle seat. The proposed suspension system features an ER(electro-rheological) damper which can produce continuously tunable damping forces by control electric fields. A dynamic model of the ER damper is first achieved by incorporating Bingham property of the ER fluid, followed by the formulation of governing equations of motion for the suspension system. A sliding mode controller is then designed on the basis of the hyper-plane sliding mode scheme. The effectiveness of the proposed control system is evaluated by investigating control performance for vibration isolation.

• Korean Journal of Materials Research
• /
• v.16 no.7
• /
• pp.401-407
• /
• 2006

ZnO is well-known as a promising material for optical communication systems and electronic displays. ZnO:Er thin films were deposited on c-plane sapphire substrates by rf magnetron sputtering, and the effects of sputtering parameters and the annealing conditions on the luminescence in the visible range were investigated. Luminescent properties depended on the crystallinity of films and annealing atmosphere. Highly c-axis oriented ZnO:Er films showed a strong emission band at 465 nm and a weak emission at 525 nm due to the energy transition of $^{4}I_{15/2}-^{4}F_{5/2}\;and\;^{4}I_{15/2}-^{2}H_{11/2}$, respectively. ZnO:Er thin films annealed at air atmosphere were superior to those annealed in $H_2$ in photoluminescence intensity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.739-745
• /
• 1998

The objective of this paper is to provide experimental data of Er(rare- earth)doped $SiO_2$thin film made by sputtering methods. The deposition rate of silica glass by sputtering method was 55$\AA$/min. In EDD measurements, the average Er concentration in the deposited film was 0.77(wt%). After annealing at $900^{\circ}C$, the Cl concentration decreased from 3.79(wt%) to 1.52(wt%). The refractive indices of the core $n_1$, cladding $n_2$ were 1.458, 1.558 respectively at 632.8 nm. The refractive index difference between core and cladding, $\Delta$n was 0.1. The refractive index profile of core and cladding interface shows step profile. In the study, $SiO_2$ glass films of Si wafer were successfully doped with active erbium. Therefore, this experimental data will be applicable for fabrications of Er doped planar integrated optical device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1082-1086
• /
• 2007

Optical characteristics of $YCOB(YCa_4B_3O_{10})$, known as a crystal of self frequency doubling, was investigated when Yb and Er ions were co-doped 20 % and 2 %, respectively. The absorption cross section of Er,Yb:YCOB crystal at $1.0\;{\mu}m$ was larger than that of Yb:YCOB, which means that the former was profitable for more energy absorption than the latter. The fluorescent lifetime at $1.5\;{\mu}m$ was measured to be 1.27 ms at room temperature, and lengthened to 1.54 ms and 1.62 ms at low temperatures of 77 K and 6 K, respectively. The line widths of fluorescent spectrum at $1.5\;{\mu}m$ were getting narrower as lowering temperature. However, we didn't observe a temperature dependent peak wavelength shift.