• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1410-1419
• /
• 1989

In this paper, we present a new synthetic high coding method which gives high image compression ratio. Given an image, only its low-pass component is transmitted by DCT coding` the high-pass component is not transmitted but synthesized using edge sharpening on the reconstructed low-pass image at the receiver. For the DCT coding which is used to encode the low-pass image, we used an improved version of Cox's variance estimator. Also, introduced are new image quality measures called GSNR and EPR which emphasize perceptual aspects of image quality. Experimental results show that the performance of the proposed synthetic high coding is better in various quality measures than that of Cox's adaptive transform coding. Also, it yields acceptable image quality with neither apparent block effect nor visible granular noise even at high compression ratio of about 30:1.

• Nuclear Engineering and Technology
• /
• v.32 no.3
• /
• pp.254-260
• /
• 2000

Electron spin resonance (ESR) spectroscopy was used to detect irradiated meat containing bones (chicken, pork and beef）, to investigate the effect of irradiation dose on the ESR signal intensity and to identify the stability of radicals under 9 weeks of storage. Chicken, pork and beef were irradiated with doses 0, 1, 3, 5 and 7 kGy at room temperature using a Co-60 irradiator. Bones were pieced and dried, which were placed in a quartz tube within an Electron paramagnetic resonance (EPR) spectrometer resonator cavity. The irradiated bone presented an asymmetric absorption in shape, different from that of a non-irradiated one. The signal intensity of smaller animals are lower than larger species. Variation was observed between samples of the same species depending on the calcification status of the bone. Moreover different irradiation doses produced different signal areas that make possible to estimate the absorbed dose of treated meat. The ESR signal stability after irradiation was stable in even after a 9 week storage at room temperature.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.4 no.2
• /
• pp.115-120
• /
• 2018

In recent years, many researchers have attempted to make use of 2D nanoparticles as molecular imaging probes since extensive investigations proved that 2D nanoparticles in the body tends to accumulate certain lesions by enhanced permeability and retention (EPR) effect. For example, graphene and carbon nitride which have high surface area and modifiable properties showed good biocompatibility and targetability when it used as imaging probes. However, poor dispersibility in physiological mediums and its uncontrolled size limited its usage in bio-application. Therefore, oxidation process and mechanical exfoliation have been developed for overcoming these problems. In this paper, we highlight the several major methods to synthesize biocompatible 2D nanomaterials like graphene and carbon nitride especially for molecular imaging study including positron emission tomography (PET).

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.372-379
• /
• 2013

In this study, we investigated the traits of the clad metals used in hot-rolled clad steel plates. We examined the sensitization and mechanical properties of STS 316 steel plate and carbon steel (A516) under the specific circumstances of post heat treatment and whether a weld was multilayered and thick or repeated because of repairs. The test conditions were as follows. The clad steel plates were butt-welded using FCAW/SAW, and the heat treatment was conducted at $625^{\circ}C$, for 80, 160, 320, 640, or 1280 min. The change in the corrosion resistance was evaluated in these specimens. In the case of the carbon steel (A516), as the heat treatment time increased, the annealing effect caused the tensile strength to decrease. The micro- hardness gradually increased and then decreased after 640 min. The elongation and contraction of the area increased gradually. An oxalic acid etch test and EPR test on STS316, a clad metal, showed a STEP structure and no sensitization. From the test results for the multi-layered and repair welds, it could be concluded that there is no effect on the corrosion resistance of clad metals. In summary, the purpose of this study was to suggest some considerations when developing on-site techniques and evaluate the sensitization of stainless steels.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.167-175
• /
• 2005

This review explores recent works involving the use of the self-assembled nanoparticles of bile acid-modified glycol chitosans (BGCs) as a new drug carrier for cancer therapy. BGC nanoparticles were produced by chemically grafting different bile acids through the use of l-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC). The precise control of the size, structure, and hydrophobicity of the various BGC nanoparticles could be achieved by grafting different amounts of bile acids. The BGC nanoparticles so produced formed nanoparticles ranging in size from 210 to 850 nm in phosphate-buffered saline (PBS, pH=7.4), which exhibited substantially lower critical aggregation concentrations (0.038-0.260 mg/mL) than those of other low-molecular-weight surfactants, indicating that they possess high thermodynamic stability. The SOC nanoparticles could encapsulate small molecular peptides and hydrophobic anticancer drugs with a high loading efficiency and release them in a sustained manner. This review also highlights the biodistribution of the BGC nanoparticles, in order to demonstrate their accumulation in the tumor tissue, by utilizing the enhanced permeability and retention (EPR) effect. The different approaches used to optimize the delivery of drugs to treat cancer are also described in the last section.

• Journal of the Korea Society for Simulation
• /
• v.16 no.3
• /
• pp.29-38
• /
• 2007

Recently, the deepening of the environment and accompanying concerns produce various environmental regulations. For example, EPR(Extended Producer Responsibility) is emphasized in many countries such as USA and Europe. According to this, the construction of a reverse supply chain is under compulsion. A diversity of parts can be controlled by a government or enterprises in the construction and management of a reverse supply chain and the effect to the environment is changed according to the policy. Therefore, it is essential to understand the effects of regulations or policies of a government and enterprises on a supply chain. The object of this research is to develop a means to assess the management efficiency and the environmental effect over a whole supply chain and show the effects of various reverse supply chain construction policies on a supply chain. This model can be utilized to establish appropriate policies by understanding the change in the management efficiency and the environmental effect according to the reverse supply chain construction and management method.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.10
• /
• pp.1672-1677
• /
• 2008

IscR (iron-sulfur cluster regulator) has been reported to be a repressor of the iscRSUA operon, and in vitro transcription reactions have revealed that IscR has a repressive effect on the iscR promoter in the case of [$Fe_{2}S_{2}$] cluster loading. In the present study, the iscR gene from A. ferrooxidans ATCC 23270 was cloned and successfully expressed in Escherichia coli, and then purified by one-step affinity chromatography to homogeneity. The molecular mass of the IscR was 18 kDa by SDS-PAGE. The optical and EPR spectra results for the recombinant IscR confirmed that an iron-sulfur cluster was correctly inserted into the active site of the protein. However, no [$Fe_{2}S_{2}$] cluster was assembled in apoIscR with ferrous iron and sulfide in vitro. Therefore, the [$Fe_{2}S_{2}$] cluster assembly in IscR in vivo would appear to require scaffold proteins and follow the Isc "AUS" pathway.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.525-540
• /
• 2008

With the competitive pressure and the development of information and communication technology, many organizations have introduced various kinds of enterprise-wide systems like enterprise resource planning (ERP) systems as strategic tools for the purpose of improving organizational performance. Despite their promised strategic benefits, however, their implementation has suffered from a high failure rate and difficulty in realizing the anticipated benefits. Previous studies have indicated that one of the most critical failure reasons is the lack of knowledge sharing and utilization across organizations. As a consequence, many information systems (IS) researchers have paid attention to examining the effect of absorptive capacity closely associated with knowledge sharing and transferring on IS usage performance. ERP systems implementation involves changes not only in systems but also in processes and other social dimensions, which can be related to organizational citizenship behavior (OCB) requiring appropriate communications and interactions among organizational members. A lack of communications and interactions due to a lack of OCB might lead to weak absorptive capacity and thus negatively influence knowledge sharing across organizations, because OCB facilitates a successful collaboration among functional units and positively impacts individual's attitude toward radical organizational change. With this motivation, this study has two research objectives. First, it introduces and tests a theoretical model accounting for the relationships among performance of ERP system usage, absorptive capacity, and OCB. Second, it examines a mediating role of absorptive capacity between OCB and performance of EPR system usage. Theoretical and practical implications of the study ware discussed, along with its limitations.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.774-788
• /
• 1999

To examine the enhancement mechanism of condensing heat transfer through microfin tube, the condensation experiments with refrigerant HCFC 22 are performed using 4 and 6 kinds of microfin tubes with outer diameter of 9.52mm and 7.0mm, respectively. Used microfin tubes have different shape and number of fins with each other The main heat transfer enhancement mechanism is known to be the enlargement of heat transfer area and turbulence promotion. Together with these main factors, we can find other enhancement factors by the experimental data, which are the overflow of the refrigerant over the microfin and microfin arrangement. The overflow of the refrigerant over the microfin can be analyzed by the geometric shape of the microfin. Microfin tubes having a shape which can give much overflow over the microfin show large condensing heat transfer coefficients. The effect of microfin arrangement is related to the heat transfer resistance of liquid film of refrigerant. The condensing heat transfer coefficients are high for the microfin tube with even distribution of liquid film.

• Journal of the Korean Ceramic Society
• /
• v.28 no.8
• /
• pp.603-610
• /
• 1991

An oxygen deficient perovskite (CaLa)(MgMn)O5.43, with the cubic unit cell parameter of 3.826$\AA$, was prepared 115$0^{\circ}C$ for 10 hrs under the ambient oxygen gas pressure. The average oxidation state of manganese was determined to be 3.86 by the iodometric titration, so that the perovskite could be formulated as (CaLa) ({{{{ { MgMn}`_{ chi } ^{II } }}{{{{ { Mn}`_{ y} ^{III } }}{{{{ { Mn}`_{1- chi -y } ^{IV } }})O5.43 (2x+y=0.14). From X-ray photoelectron spectroscopy, the manganese ions in the lattice are mostly tetravalent, but two paramagnetic configurations were observed in the EPR spectrum: One sharp isotropic signal with hyperfines (ΔH 50 G, g=1.997$\pm$0.002 and │A│=82(4)$\times$10-4 cm-1) and a broad isotropic one (ΔH 1600 G, g=1.994$\pm$0.002), those which correspond respectively to Mn(II) and Mn(IV) ions. According to the magnetic susceptibility measurement, it follows the Curie-Weiss law from 20 K up to room temperature with $\mu$eff=5.23 $\mu$B, which is relatively larger than spin-only value({{{{ { mu }`_{eff} ^{s.o } }}=4.04 $\mu$B) due to the effect of weak ferromagnetic coupling. Such a result is in accord with a theory of semicovalence exchange.