• 한국안전학회지
• /
• 제27권6호
• /
• pp.31-42
• /
• 2012

Urban transit vehicle that uses electrical energy, is faster, safer and energy-efficient public transit than other means. As a Research method, the Matlab/Simulink are used to modeling a regenerative brake-capable train, and actual parameters such as powering and braking characteristics, all kinds of resistance, passenger load, velocity, gradient, radius of curve etc and powering and breaking commands per time or distance are inputted to train's dynamic equation, then a simulation program is made and used to yield train driving pattern and driving time and the amount of driving energy used thereby at auto and manual operation and at all sector.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1229-1234
• /
• 2009

현재 한국철도공사에서 운행하는 철도차량은 KTX, 새마을호동차(PP), 선행전기기관차 (NEL), 전기기관차 (EL), 디첼기관차, 도시통근형동차(CDC), VVVF, 저항제어차 등 8 여종에 이르고, 현재는 150km/h 급 간선행전기동차 (Electric Multiple Unit)는 시험운행중이다. 또한 조만간 폐차되는 새마을호동차의 대체차량으로 180km/h 급 간선형전기동차의 도입이 예정되어 있다. 하지만 아직까지 철도차량의 운전실제어대 설계기준이 없고, 제어기기의 배치 및 형식 등에 대해 운전자의 입장에서 인체공학적 접근을 시도한 연구도 전무한 실정이어서 개발되는 차량마다 제어기의 형식 및 조작방식이 상이하다. 이는 운전자의 기기 취급 오류률 유발할 가능성이 매우 크며, 신규차량 도입시 별도의 운전자 교육을 시행해야하는 동 운영 상의 효율성이 매우 떨어진다. 따라서 운전자의 의견수렴을 바탕으로 운전 중 상시 취급하는 제어기기 및 안전설비에 대하여 안전공학 및 인체공학적 설계기준을 마련하여 운전자로 하여금 기기취급에 정확성을 높이고, 이례적인 상황에서 보다 더 신속한 대처를 할 수 있도록 하여 철도차량 안전성과 운영상의 효율성을 증진하고자 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2139-2144
• /
• 2008

There are eight kinds of railroad vehicles such as KTX, PP(Push-Pull), NEL(New Electric Locomotive), EL(Electric Locomotive), DL(Diesel Locomotive), CDC(Commuter's Diesel Car), VVVF(Variable Voltage Variable Frequency) and Resistance Control Car that Korail corporation presently runs, and a variety of vehicles just like EMU(Electric Multiple Unit) and DMU(Diesel Multiple Unit) currently developed and accepted are running in the near future. However, There is still no design standard of the control stand of cockpit and the same compatibility of forms and control unit arrangements for locomotive engineers because no one has tried to approach in an ergonomic way. It can cause Locomotive engineers to make errors using the machinery. when the new vehicles are adopted, The efficiency of operation will quite fall down due to the separate training of the engineers. Therefore, We'd like to improve the accuracy of manipulating the machinery used by the engineers at all times according to the design standard of ergonomic technology and safety engineering and increase the operational efficiency and the safety of railroad vehicles in order to handle the problems as quickly as we can in an emergent situation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.169-174
• /
• 2012

Reduction unit is one of the most important components for railway vehicle because torque of motor must be transmitted to wheels of vehicle by reduction unit. However, According to advanced studies, it has been often broke down due to the damage, fatigue and wear of gear. To solve this problem, defect diagnosis methods of gear have been mainly using the vibration diagnosis technology through vibration waveform and frequency analysis. However, We should know vibration characteristics of normal state reduction unit prior to defect diagnosis. So in this paper, We had analyzed vibration characteristics of reduction unit in order to utilize monitoring system development. Comparison of targets is the vibration characteristics of normal state reduction unit about Electric Multiple Unit(EMU) and the High-speed trains(KTX, KTX II).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.220-224
• /
• 2005

EMU(Electric Multiple Unit) operated in local area is mostly consist of moving system on the rail and the traction motor drives the gear and wheel with the mechanical propulsion force. Most of countries are interested in Magnetic Levitation Vehicle for the transportation system on next generation and they have been studying about it continuously. Thus this paper is studied the Linear Induction Motor as the propulsion equipment of Magnetic Levitation Vehicle

• 한국철도학회논문집
• /
• 제5권4호
• /
• pp.215-221
• /
• 2002

In the standard specifications for the urban EMU (Electric Multiple Unit) train, there are several items to ensure safety against accidents. The 21st to the 23rd items have much to do with the crashworthiness of the urban EMU train. In this study, a rubber-tired Automated Guide-way Transit (AGT) System under development by KRRI is numerically evaluated from the point of view of crashworthiness by applying the above crashworthiness items. The numerical results show that the design of the AGT satisfies the 22nd and 23rd items. But a design modification to adopt mechanical fuses is recommended to reduce impact accelerations with respect to the 21st item.

• 한국철도학회논문집
• /
• 제3권3호
• /
• pp.170-176
• /
• 2000

Nowadays, the vehicle structure weight of urban transit system has been reduced in order to save energy and materials. However, this light weighted vehicle structure is very important to verify the fatigue strength at the development stage. Bogie system consists of bogie frame, suspensions, wheel-sets, braking system and transmission system. Among these components, the bogie frame is most significant component subjected to the whole vehicle and passenger loads. In this study, the bogie frame for the standard EMU power car is evaluated to the static and fatigue strength. And, the evaluation method is used the JIS E4207 specification throughout the FEM analysis and static load test. The static and fatigue test results for the standard EMU bogie frame of power car has been appeared very safety and stable for the design load conditions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1336-1343
• /
• 2007

The HVAC takes the most important role in the Electric Multiple Unit for maintaining the healthy and comfortable indoor environment, however we also should consider the outdoor environment in terms of "environment's friendly" because the refrigerant used for the HVAC system is strongly related with the issues of "the Protection of environment" such as "the Global Warming" and "The Ozone layer Depletion". Therefore we survey (1)the potentially harmful impact on human health and the environment through modification of the ozone layer and the Green house effect, and (2)the international and the domestic environment's policies and (3)the potential alternative refrigerants usable for the EMU HVAC in terms of "the environment friendly properties", "the performance" and (4) "the applicabilities of the refrigerant for the EMU HVAC".

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.420-422
• /
• 2003

Aging and failure of motor insulation depend on the stresses imposed on it. The insulation life time depends on the severity of the stresses. The electrical aging by transient surge is very important to traction motor in EMU(electric multiple unit). This paper Presents the insulation characteristics of stator coil by transient surge from inverter. There are several nondestructive tests available for checking the condition of motor insulation, the probable extent of aging,. and the rate of which aging is taking pace. So the insulation characteristics of stator coil were each analyzed by measurement of leakage current, dielectric loss($tan{\delta}$), capacitance, polarization index(PI) and partial discharge. The method of diagnosis is able to analyze the aging condition and Predict the life of the traction motor in EMU.

• 한국철도학회논문집
• /
• 제6권4호
• /
• pp.273-278
• /
• 2003

In this study, an aluminum bodyshell with a modular front end made of composite materials is numerically evaluated applying the standard specifications for the urban EMU (Electric Multiple Unit) train. Structural analyses under compressive load, torsional load and free vibration satisfy the standard specifications, but analysis under normal load doesn't. By the way, the aluminum bodyshell of the car except the modular front end is almost same to that of the Korean standard EMU, which satisfy the standard specifications. It is presumed that the stiffness of the modular front end made of composite materials has some influence on the strength of the aluminum bodyshell.