• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.98-105
• /
• 2014

As environmentally friendly energy takes center stage, interests for Electric Vehicles/Plug in Hybrid Electric Vehicles (EVs/PHEVs) are getting increase. With this trend, there is no doubt EVs will take large portion to penetrations of total cars. Therefore, accurate EV modeling is required. Battery is one of the main components with the power system view of aspect. Hence, in this paper, reviews and discussions of some types of batteries for EV are contained by considering energy density and weight of the batteries. In addition, simulations of Li-Ion battery are accomplished with various variables such as temperature, capacity fading and charge/discharge current. It is confirmed that temperature is the main factor of capacity fading. Validation of the modeled battery is also conducted by comparing it with commercialized battery.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.241-243
• /
• 2008

태양광 발전 기술의 발달로 용량이 증가함에 따라 계통연계가 증가하고 있다. 본 논문에서는 태양광 발전이 계통에 연계됨에 따라 기존 배전계통에 미치는 전압변동 즉, 플리커 현상을 분석하였다. EMTP/ATPDraw를 이용하여 태양광 발전이 연계된 배전계통을 모델링 하였다. 태양광 발전은 직류가 3상 PWM 인버터를 통하여 교류로 변환되어 계통에 연결되도록 모델링하였다. 태양광 array를 병렬로 연결하여 태양광 발전의 출력량을 증가시켜서, 출력변동에 따른 계통의 전압변동을 분석 하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2287-2288
• /
• 2008

전력계통에는 수많은 기기가 복잡하게 연계 되어있으므로 지락사고가 일어났을 때 피해의 정도가 크다. 그래서 선로 모델링이 중요한데 선로 모델에는 많은 모델이 있기 때문에 각각의 모델들의 특성을 먼저 알아야한다. 그래서 본 논문에서는 몇 가지 선로 모델을 이용하여 모의 하여 결과를 비교해 보았다. 모의 Tool로는 EMTP/ATPDRAW를 이용하였고, 모의한 선로 모델은 Bergeron 비연가 모델, 연가 모델과 PI 등가 모델, 분포정수 모델을 이용하여 당진에서 신안성까지의 송전선로를 모델링하였다. 정상상태 일 때와 A상에서 지락사고가 일어났을 경우를 가정하고 모의하여 파형을 비교하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.35-40
• /
• 2007

The one step type and two step type pole are used in distribution line. If the three phases are not balanced, the communication line can be damaged by induced voltage. This paper calculates the neutral current using KEPCO's distribution system model which is only composed by one step type pole. The used system model is modelled by using ATPDraw and the neutral current is calculated by using EMTP/MODELS. Many cases for abstracting the neutral current characteristics in KEPCO's distribution system are simulated and analyzed.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.391-393
• /
• 2008

This paper is analysed by switching overvoltage on operating reclosing in 154 [kV] combined transmission systems. Combined transmission systems are modeled by EMTP/ATPDraw program. It is fault condition that simulate high resistance earth fault. The simulation is carried out considering variation of parameters such as resistance value of fault point and rate of underground line.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.285-287
• /
• 2007

This paper describes that the effect on the other system is generated by the single line to ground fault of the underground transmission systems and distribution systems established the common ground in trefoil. Each system is modeled by EMTP/ATPDraw and the system carry out simulations according to the various values of common ground to analyse. In this study, the result of analysis based on simulation suggests protection method and ground system of each system.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.474_475
• /
• 2009

Recently the grid-connected PV system is increased in the power system. According to this trend, protection coordination issues are becoming more important when the PV generation is connected to the power system. In this paper, we model the PV system using EMTP/ATPDRAW and analyze the impact of the PV generation for the fuse coordination.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.340_341
• /
• 2009

This paper suggests a detection scheme of a secondary arc extinction using the peak value of a fault voltage estimated by correlation algorithms. The system implemented in this paper is based on a Korean 765 kV system and the suggested proposed scheme is tested on the system. The performance of the method is analyzed by using Electro-Magnetic Transients Program (EMTP)/ATPDraw.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.480-481
• /
• 2006

This paper presents computation of the neutral torrent using KEPCO's distribution system model which is composed by only one step type poles. The used system model is modelled and simulated by using ATPDraw. And the neutral current is calculated by using EMTP/MODELS.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2243-2244
• /
• 2008

In this paper, XLPE cable underneath a bridge is modelled using EMTP/ATPDraw. Bridge section is also modelled by mutually coupled parallel conductor with XLPE cable. This paper is analysed the overvoltge by structure change of bridge section when the lightning occurs on the system.