• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.293-298
• /
• 2001

EB-NMP free standing film is manufactured from NMP solution of polyaniline(emeraldine base EB). Also ES(emeraldine salt EB . HCl) film is manufactured by doping of EB-NMP film with 1 mole HCI aqueous solution. And EB-mixture films containing conductor(carbon black, graphite, Ag etc.) are prepared, In this study, electromagnetic interference shielding efficiency(EMI SE) of ES free standing film ($\sigma$=5 S/cm, t=0.14mm) is 23~25 dB in the frequency range of 10 MHz~1 GHz. ES-mixture(carbon black, graphite, Ag etc.) films, polyaniline film doped camphorsulfonic acid(CSA) show higher EMI SE(30~34 dB, 36~42 dB, 44~52 dB, 34~43 dB) property than that of ES free standing film, respectively.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.4
• /
• pp.47-54
• /
• 1991

본 논문에서는 전자파 해석에 관련된 기존의 해석 기법들을 간략하게 비교, 검토하고 GTD / UTD를 기본으로하여 고주파 해석 기법에 관련된 몇가지 문제들을 다룬다. 전자파 해석이란 전자파의 복사(radiation), 산란(scattering) 및 결합(coupling)에 관련된 문제의 해석을의미 한다. 전자파 해석은 여러 목적을위해 응용되고 있으며 EMC / EMI문제의 분석 및 대책 수립에도 응용될 수 있다. EMC / EMI 문제의 근원은 전자파의 간섭(interference) 현상이다. Emitting source로부터 복사(radiation)되는 간섭파는 여러 경로를 통해서 receptor로 coupling된다. 일반적으로 emitter와 receptor사이에는 여러 복잡한 구조물이 산란체로 작용하고 있으므로, emitter와 receptor사이의 직접경로(direct path)를 통한 coupling과 함께 구조물에 의한 전자파의 반사 및 회절을 통한 간접경로(indirect path)의 coupling도 고려되어야 한다. 따라서 EMC / EMI문제는 자유공간(free space)상에 있는 antenna 사이의 송수신 문제보다 매우 복잡하고 정확한 couplin의 계 산에 적지않은 어려움이 있다. EMC / EMI대책수립은 일차적으로 coupling path의 차단을 통해서 가능하므로 전자 파의 coupling path의 분석과 전자파의 복사 및 산란 mechanism에 대한 해석이 필수적이다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.305-312
• /
• 2007

Among many types of light rail transits (LRT), the rubber-tired automated guide-way transit (AGT) is prevalent in many countries due to its advantages such as good acceleration/deceleration performance, high climb capacity, and reduction of noise and vibration. However, AGT is generally powered by high-voltage electric power feeding system and it may cause electromagnetic interference (EMI) to measurement sensors. The fiber optic sensor system is free from EMI and has been successfully applied in many applications of civil engineering. Especially, fiber Bragg grating (FBG) sensors are the most widely used because of their excellent multiplexing capabilities. This paper investigates a prestressed concrete girder bridge in the Korean AGT test track using FBG based sensors to monitor the dynamic response at various vehicle speeds. The serviceability requirements provided in the specification are also compared against the measured results. The results show that the measured data from FBG based sensors are free from EMI though electric sensors are not, especially in the case of electric strain gauge. It is expected that the FBG sensing system can be effectively applied to the LRT railway bridges that suffered from EMI.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.166-176
• /
• 2007

Measurement uncertainty assessment is very important in measurement and calibration. RRL provides antenna calibration services for EMI test. Reliability of EMI test depends on accurate antenna calibration. Antenna calibration results have to be accompanied with measurement uncertainty for its better reliability. In the late of 2005, CISPR issued the CISPR/A/644/C which describes the antenna calibration and measurement uncertainty. In this paper, on the basis of CISPR/A/644/C, we provide the measurement uncertainty values for dipole antenna calibration at the Calibration Test Site(CALTS) of Icheon. The antenna calibration method is 3-antenna height-scanning-averaging method, which measures the free-space antenna factor. We also considered all uncertainty sources that can affect measurement results during calibration.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1322-1327
• /
• 2005

This paper presents a single-stage ZVT full-bridge AC/DC converter for aerospace applications. The detailed operating principle and design consideration of this soft-switched converter are analyzed and described. The proposed circuit topology and control scheme are proposed to exhibit optimum performances (i.e. high power factor, high efficiency, ring-free and low EMI features). A laboratory prototype, 500W 5V/100A AC/DC converter was implemented. The simulation and experimental waveforms verify the feasibility of the proposed design.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.167-170
• /
• 2003

This paper presents the results of a series of performance tests for the Stilting cryocooler. A free piston and free displacer(FPFD) Stilting cryocooler for cooling infrared and cryo-sensors is currently under development at KIMM. Our coolers are specifically designed to work in the thermal imaging device and to meet requirements such as cooling capacity, COP and high reliability. In this work, Stilting cryocooler is designed, manufactured and fabricated, and performance characteristics for the vibration, acoustic noise, EMI and leak rate are evaluated. Vibration outputs are measured to 20KHz for compressor and expander, respectively. And, the objective of noise test is a noise level, less than 30㏈ at 5 m. EMI tests are carried out according to the standard MIL-STD-461C tests RE01 and RE02. Leak test for the Stilting cryocooler is performed by bombing method.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.4
• /
• pp.183-188
• /
• 2002

The structure of species formed in $NbCI_5-I-ethyl-3-methylimidazolium$ chloride (EMIC) room-temperature molten salt (RTMS) was examined with the Raman spectroscopic measurement and ab initio molecular orbital calculation. The equilibrium structures of $NbCl_5,\;NbCl_6^-,\;Nb_2CI_{10},\;Nb_2CI_{11}^-,\;Nb_3CI_6^-,\;NbCI_6^--EMI^+\;(in\;which\;NbCI_6^-$ anion approaches $EMI^+$ cation with strong interaction) and $Nb_2CI_{11}^--EMI^+$ were obtained with the HF/LANL2DZ level of calculation. The harmonic frequencies at each equilibrium structure were compared with Raman spectra. The harmonic frequencies of $NbCI_6^--EMI^+,\; Nb_2CI_{11}^--EMI^+,\;and\;Nb_2CI_{10}$ were in good agreement with the Raman spectra of RTMS melts. In the $NbCI_5-EMIC RTMS$, the main species were $NbCI_6^-\;and\;EMI^+$. In the $NbCl_5-EMIC$ RTMS added $NbCl_5\;over\;50mol\%$, small amount of $Nb_2CI_{11}^-\;and\; Nb_2CI_{10}$ were also formed. The structures of anions and cation in the RTMS distorted from free ions with Coulomb force.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.873-882
• /
• 2013

The effective way of estimation and analysis of EMI(Electromagnetic Interference) in Wireless Power Transfer System operating at 13.56 MHz is proposed. In this paper methodology of driving magnetic field strength and electric loop current of two antennas which are in free space and on PEC plane using image theory and duality is proposed. Perfect electric conductor(PEC) is planar, infinite in extent, and perfectly conducting plane. And we will refer it as PEC plane. A equivalent circuit model is used to analyze. Using this theoretical analysis, we can derive maximum magnetic field strength of the far-field region numerically using measured data of near-field maximum magnetic field strength. The experimental results using commercial numerical simulation tool are in agreement with the theoretical results. Also, using the derivation of maximum magnetic field strength in the far-field region, we can easily estimate the maximum allowable power dissipation that meets EMI regulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.843-849
• /
• 2002

This study is based on the recent CISPR research which is focused on correlation of OATS and FAR. First, we calculate the correlaton factor about OATS and FAR. We measured the field strengths at the OATS and in the FAR both for 3 m distances to obtain the experimental correlation factors. We programmed correlation factor that calculated from theoretical models. The Results showed the measured correlation factor in 6 dB from 30 to 1,000 MHz. It will be use to substitute FAR for OATS about efficient to measure EMI(Electro Magnetic Interference).

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.304-310
• /
• 2015

A SCALDO(Supercapacitor Assisted LDO) regulator is a new regulator having advantages of a SMPS(Switch Mode Power Supply) which has a good efficiency and a LDO(Low Drop-out) regulator which has stable output characteristics and good EMI(Electro Magnetic Interference) characteristics. However, a conventional SCALDO regulator needs a lot of power consumption to control its switches and it drops an efficiency of the circuit. In this paper, to reduce switching power consumption and improve an efficiency of the circuit, a new SCALDO regulator adopting MOSFETs as its switching parts is proposed and it is found out that the proposed SCALDO regulator has the maximum 9.5% higher efficiency than the conventional SCALDO regulator. We also try to simplify production process of the circuit by changing switching control method of the circuit from MCU(Micro-controller unit) based firmware control to hardware control using a comparator and a T-F/F(Flip Flop).