• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.101-112
• /
• 2014

The aim of this study was to evaluate the biological mechanism of orally administered ethanolic extract of fly maggot(EM) on hypocholesterolemic rats fed a high-cholesterol diet. Sprague Dawley male rats were divided into four groups (EM dose control=0, 5.0, 7.0, and 9.0 mg/100 g BW) and were treated for 6 weeks. EM groups revealed a significant reduction in serum triglyceride, total cholesterol, and LDL-C when compared with the control group(p<0.05). HMG-CoA reductase activity in EM groups were lower than those of the control group, but total sterol, neutral sterol, and bile acid excretion were increased in EM groups when compared with the control group(p<0.05). To identify the biological mechanism of EM towards the hypocholesterolemic effect, sterol response element binding proteins (SREBPs) and the peroxisome proliferator-activated receptors ($PPAR{\alpha}$ transcription system were determined in rats fed a high-cholesterol diet. It was discovered that EM suppress the expression of SREBP-$1{\alpha}$ and SREBP-2 mRNA in the liver tissues of high-cholesterol diet fed rats, while simultaneously increasing the expression of $PPAR{\alpha}$ mRNA(p<0.05). This finding indicates that EM may have hypocholesterolemic effects in rats fed a high-cholesterol diet, by regulating cholesterol metabolism-related biochemical parameters and SREBP-$1{\alpha}$ SREPB-2 and $PPAR{\alpha}$gene expression.

• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.493-502
• /
• 2018

The purpose of this study was to develop EM media for water treatment and to remove nitrogen and phosphorus which cause water algae boom in water system. The ideal mixing ratio of raw material such as clay: zeolite: vermiculite: activated carbon for manufacturing the EM media was 10: 2.5: 0.1: 2, and the calcination temperature was $700^{\circ}C$. The comparison of the physical properties of manufactures using distilled water and EM activated liquid as the material mixture are as follows. Porosity and density of EM media were 39.98 % and $1.13kg/m^3$, adsorption efficiencies of nitrogen and phosphorus were 69.3 % and 38.9 %. In contrast, porosity and density of distilled water media were 37.80 % and $1.11kg/m^3$, and adsorption efficiencies of nitrogen and phosphorus were 62.5 % and 37.8 %. The adsorption rate of nitrogen and phosphorus in the EM media was higher than that of the distilled water made one by 6.8 % and 1.1 %, respectively. The adsorption characteristics of the media to nitrogen and phosphorus could be expressed by the Freudlich adsorption isotherm. The change of calcination time did not affect the adsorption efficiency of phosphorus and nitrogen when EM media was formed, but it was considered that it affects the strength of media. Nitrogen removal efficiency was the best record in 4 hours of calcination time and 3 hours of calcination time in phosphorus removal efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.444-449
• /
• 2010

The aim of this study was to measure the hair melanins of various colors and to find the relationship between the quantity of melanins and hair color phenotypes in alpacas. According to the Munsell color system, 3 healthy alpacas were selected for each of the 22 different hair color phenotypes (66 alpacas altogether). Alpaca hair was taken from the lateral thoracic region and then dissolved with different solutions to obtain melanins. The values of alkali-soluble melanins (ASM), eumelanin (EM) and pheomelanin (PM) were measured by spectrophotometric assay, and labeled as Sp.ASM, Sp.EM and Sp.PM, respectively. Data were analyzed using SPSS11.5 software. Results showed that average Sp.ASM and Sp.PM were increased as the color deepened from white to black, ranging from 0.500 to 4.543 for Sp.ASM and from 0.268 to 1.457 for Sp.EM. However, average Sp.PM had no such apparent relationship with color. Based on the value of Sp.ASM and EM, 7 hues were produced and gray was a single hue. Most of the data were in a normal distribution (p>0.10). ANOVA analysis showed that mean values of Sp.ASM, Sp.EM and Sp.PM were significantly different (p<0.05). The results also showed that Sp.ASM was positively correlated with Sp.EM but the correlation between Sp.ASM and Sp.PM was not significantly different from 0. It is concluded that EM is the major constituent of alpaca hair melanin; there is a significant correlation among ASM, EM and alpaca hair colors, and EM is the most reliable parameter for distinguishing these groups.

• Geophysics and Geophysical Exploration
• /
• v.2 no.4
• /
• pp.180-183
• /
• 1999

A proto-type seismic measurement system with a reference was developed to improve S/N (signal-to-noise ratio) of seismic data, especially in noisy urban areas. Two pairs of correlation measurements (the one for microphone and geophone, and another for electromagnetic (EM) loop and geophone) were carried out near Kimpo Airport and at Kimje. The spectrum analyses were also performed to investigate the correlation of two pairs of time series; one for microphone and geophone, and another for EM loop and geophone. The sound waves measured with the microphone and the geophone are highly correlated. However, differences in the reponses are readily identifiable across 200 Hz; in the vicinity of 100 Hz, the spectral energy for geophone is 20 dB higher than that for microphone, and at near 500 Hz, the spectral energy for microphone is 30 dB higher than that for geophone. Overall, the spectral energy appears concentrated on the frequency window below 600 Hz for geophone. It contrasts with the observation of dominant frequency at the range of above 200 Hz for microphone. The wave forms of EM noise (due to an ACDC inverter) measured with EM loop and geophone are consistently and highly correlated each other. The power spectrum of the EM noise for EM loop shows that the spectral energies at odd harmonic frequencies of 60 Hz are higher than those at even harmonic frequencies of 60 Hz. It is compared to the power spectrum for geophone; the spectral energies at odd harmonics are nearly same as those at even harmonic frequencies.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.583-597
• /
• 2001

Tracking the targets of interest has been one of the major research areas in radar surveillance system. We formulate the tracking problem as an incomplete data problem and apply the EM algorithm to obtain the MAP estimate. The resulting filter has a recursive structure analogous to the Kalman filter. The difference is that the measurement-update deals with multiple measurements and the parameter-update can estimate the system parameters. Through extensive experiments, it turns out that the proposed system is better than PDAF and NNF in tracking the targets. Also, the performance degrades gracefully as the disturbances become stronger.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.27-31
• /
• 2010

In this paper, we developed an EM wave absorber having the absorption ability of more than 15 dB for port logistics RFID system by using AMP. Firstly, we fabricated EM wave absorber by using AMP and CPE(Chlorinated Polyethylene) with different composition ratios 80:20 wt.% and 85:15 wt.%. Secondly, we designed the optimum EM wave absorber using the calculated material constants obtained from measured input impedance of the samples. Therefore, EM wave absorber with absorption ability of 17.5 dB at 433 MHz when composition ratio of AMP:CPE=85:15 wt.% and thickness of 5.5 mm.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.159-160
• /
• 2010

In this paper, we compared the absorption abilities of AMP and Sendust EM wave absorbers for a port logistics RFID system. Firstly, we fabricated EM wave absorber samples by using each absorbing material, AMP or Sendust, and CPE (Chlorinated Polyethylene) with composition ratios 85 : 15 wt. %. Secondly, we designed the optimum EM wave absorber using the calculated material constants found from the measured input impedance of the samples. Therefore, we confirmed that imaginary factor of complex relative permeability influences absorption ability and that AMP is better absorbing material than Sendust at the frequency band of 433 MHz.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.12
• /
• pp.1128-1138
• /
• 2010

One of the typical problems in the precise vibration is resonance characteristics at low frequency disturbance due to a heavy mass. An electro-magnetic(EM) air spring is a kind of vibration control unit and active isolator. The EM air spring in this study aims at removing the low frequency resonance for semiconductor manufacturing. The mechanical and electronic parts in the active isolator are designed to operate under a weight of 2.5 tons. The EM spring is floated using air pressure in a pneumatic elastic chamber and actuated by EM levitation force. The actuator consists of a EM coil and a permanent magnetic plate which are installed inside of the chamber. An air mount was constructed for the experiment with a stone surface plate, 4 active air springs, 4 gap sensors, a DSP controller, and a multi-channel power amp. A PD control method and operating logic was applied to the DSP. Simulation using 1/4 model was carried out and compared with the experiments. The time duration and maximum peak at resonance frequency can be reduced sharply by the proposed system. The results show that the active system can avoid the resonance caused by the natural frequency of the passive system.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1571-1578
• /
• 2013

With the emergence of high-integration array and large area panel process, the need to minimize the generation of particles in the field of semiconductor, LCD and OLED has grown. As an alternative to the conventional roller system, a contactless magnetic conveyor has been proposed to reduce the generation of particles. An EM-PM hybrid which is one of magnetic levitation types is already proposed for the conveyor system. One of problems pointed out with this approach is the vibration caused by the dynamic interaction between conveyor and rail. To reduce the vibration, the introduction of a secondary suspension system which aims to decouple the levitation electromagnet from the main body is proposed. The objective of this study is to develop a dynamic model for the magnetically levitated conveyor, and to investigate the effect of the introduced suspension system. An integrated model of levitation system and rail based on 3D multibody dynamic model is proposed. With the proposed model, the dynamic characteristics of maglev conveyor system are analyzed, and the effect of the secondary suspension and the stiffness and damping are investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.283-289
• /
• 1997

A 500Wh class high-speed Flywheel Energy Storage System (FESS) driven by a built-in BLDC motor/generator has been designed, which runs from 30000 to 60000rpm nominally. Due to the motor/generator inside, the flywheel rotor made of composites supported by PM/EM hybrid bearing system has a shape of bell or pendulum and thus requires accurate rotordynamic analyses and prediction of its dynamic behavior to secure the operating reliability. Rotordaynamic analyses of the flywheel rotor-bearing system revealed that the bell shaped rotor has two conical rigid-body modes in the system operating range and the first conical mode, of which nodal point lies in the radial EM bearing position, can adversely affect the dynamic response of the rotor at the corresponding critical speed. To eliminate the possibility of wild behavior of the rotor, two guide bearings are adopted at the upper end of the rotor and motor/generator. It was also revealed that the EM bearing stiffness of 0.5~1.0E+6 N/m and damping of 2000 Ns/m are favorable for smooth operation of the system around the 2nd critical speed.