• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.5
• /
• pp.113-119
• /
• 2015

The technical development of electric vehicles has been actively proceeding because of the reduction of oil resources and need for eco-friendly vehicle technology. In particular, an electronic control unit is an important element in the technology of electric vehicles due to the motor drive system. This paper concerns an experimental study on the thermal analysis of the steering control ECU structure for an electric vehicle. The ECU unit is designed for eight heat sinks for the thermal analysis of the ECU structure. The thermal analysis characteristics of the ECU structure are evaluated by the temperature distribution, heat flow, von Mises stress, total translation, and external surface temperature measurement of the ECU unit.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2014

This paper presents the design and development of ECU simulator in order to verify automatic firmware update system of ECU SW on the vehicle. We designed and developed general-proposed ECU simulator as devide into HW and SW parts. HWadopt 32bit MPU, CAN, LIN, LCD, and touch-pad button to satisfy general-proposed ECU level. And SW constructed as finite-state-machine structure in order to support HW spec. We developed ECU manager which deliveries update data to verify validity of operation. And we tested ECU simulator with ECU manager. For test of validity of ECU simulator, we set 4 scenarios between ECU simulator and manager. As the result, we confirmed validity of operation in ECU simulator for automatic SW update system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1959-1968
• /
• 2016

The recent automobiles, a number of ECU inside the vehicle has been used. Also, each ECU is connected to different types of networks in accordance with the characteristics. Therefore, efficient data exchange between discrete network has emerged as a very important element. The gateway is responsible for the ability to exchange data between discrete network. In this study, we propose the new gateway algorithm to provide the structure of the mapping table to improve the efficiency of data exchange between discrete network. Also it provides a structure of a new gateway algorithm with a function of adjusting the priority of the data to be transmitted to another network arbitrarily. Moreover, the proposed gateway structure may simultaneously convert the transmission data input from a particular network to multiple networks. Another advantage is easy to change the entire data structure only if we change the table structure in the gateway.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.1-8
• /
• 2013

Remanufacturing of automobile parts is important for increasing the recycling resources. ECU(Electronic Control Unit) systems are becoming an increasingly important part of an automobile. But production company are reported in the ECU remanufacturing industry of domestic automobile parts due to a lack of remanufacturing technology and marketability. This paper introduces the ECU of remanufacturing, also grasps the structure and the analyzes failure cause that is external factors and fault in the characteristic design and steps in the Independent ECU remanufacturing process. The ECU manufacturing industry of the US was examined. The results in this paper could be used as the system information for further remanufacturing industry of domestic automobile parts.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1115-1130
• /
• 2020

Modern vehicles are equipped with a number of ECUs(Electronic Control Units), and ECUs can control vehicles efficiently by communicating each other through CAN(Controller Area Network). However, CAN bus is known to be vulnerable to cyber attacks because of the lack of message authentication and message encryption, and access control. To find these security issues related to vehicle hacking, CAN Fuzzing methods, that analyze the vulnerabilities of ECUs, have been studied. In the existing CAN Fuzzing methods, fuzzing inputs are randomly generated without considering the structure of CAN messages transmitted by ECUs, which results in the non-negligible fuzzing time. In addition, the existing fuzzing solutions have limitations in how to monitor fuzzing results. To deal with the limitations of CAN Fuzzing, in this paper, we propose a Non-Random CAN Fuzzing, which consider the structure of CAN messages and systematically generates fuzzing input values that can cause malfunctions to ECUs. The proposed Non-Random CAN Fuzzing takes less time than the existing CAN Fuzzing solutions, so it can quickly find CAN messages related to malfunctions of ECUs that could be originated from SW implementation errors or CAN DBC(Database CAN) design errors. We evaluated the performance of Non-Random CAN Fuzzing by conducting an experiment in a real vehicle, and proved that the proposed method can find CAN messages related to malfunctions faster than the existing fuzzing solutions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.267-270
• /
• 2021

In order to diagnose a vehicle, it is achieved by collecting diagnostic data within the ECU or between ECUs and managing the diagnostic data by utilizing various communication methods through an electronic device composed of an ECU(Electronic Control Unit), which is an automotive electronic device. As communication methods, LIN, CAN, FlexRay are mainly used. Recently, wired/wireless communication is being used based on Ethernet. In order to perform vehicle diagnosis, it is necessary to know the diagnosis code generated by the ECU and to collect diagnosis data using diagnosis communication. In addition, diagnostic data can be managed from the ECU only when the application software required for vehicle diagnosis is configured. If many automobile manufacturers are manufacturing ECUs based on the AUTOSAR standard, which is an automotive electronic standard, the software structure is also configured to be applied according to the standard. In this paper, we understand the vehicle diagnosis communication method of the AUTUSAR standard, study the configuration and processing method of diagnosis data, and study the contents of software components, diagnosis communication, and diagnosis event processing.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.13-20
• /
• 2005

The most typical fuel control devices of motorcycle engines have carburetors, they are simple in structure and reliable in work. Most of the motorcycle engines have used carburetors in the fuel system, but the fuel economy and the emissions of those engines are bad when we compared with automobile engines. According to stricter emission regulations and higher requirements for fuel economy, the application of the carburetor on the motorcycle engines would be limited. In this paper, we studied about the ECU of motorcycle engine controled by indirect method. A new engine system was designed and experiments were carried out. The experimental results for both carburetor type and ECU type were compared. Maximum torque of $1.053kg{\cdot}m$ at 6500rpm was measured. The engine torque controled using ECU was increased by $10\%$ compared with the carburetor type.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.4
• /
• pp.247-258
• /
• 2017

Since 2016 when the regulations related to vehicle structure and device modification were drastically revised, the car tuning market has been growing rapidly. Particularly, many drivers are showing interest in changing the interior and exterior according to their preference, or improving the specifications of their cars by changing the engine and powertrain, among others. Also, as the initial engine settings such as horse power and torque of the vehicle are made for stable driving of the vehicle, it is possible to change the engine performance, via Engine Control Unit (ECU) mapping, to the driver's preference. However, traditionally, ECU mapping could be only performed by professional car engineers and the settings were also decided by them. Therefore, this study proposed a system that collects data related to the driver's driving habits for a certain period and sends them to a cloud server in order to analyze them and recommend ECU mapping values. The traditional mapping method only aimed to improve the car's performance and, therefore, if the changes were not compatible with the driver's driving habits, could cause problems such as incomplete combustion or low fuel efficiency. However, the proposed system allows drivers to set legally permitted ECU mapping based on analysis of their driving habits, and, therefore, different drivers can set it differently according to the vehicle specifications and driving habits. As a result, the system can optimize the car performance by improving output, fuel efficiency, etc. within the range that is legally permitted.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.87-95
• /
• 2005

Most of the motorcycle engines have used carburetors in the fuel system, because of its simple structure and reliability but the fuel economy and the emissions of those engines are bad when we compared with automobile engines .To meet with the tighten emission regulations and the higher requirements for fuel economy, the application of the carburetor on the motorcycle engines would be limited. Therefore, it is important to develope a ECU control system for motorcycle engines. Since the fuel injection system is expensive, it is necessary to decrease the cost of ECU system for motorcycle engines, but the accuracy of the ECU control system should be increased as high as possible. In this paper, we studied about the AFS characteristics of motorcycle engine controled by indirect method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.11
• /
• pp.912-917
• /
• 2001

In this study, we define the measuring method of crank angle precisely using an event and perform a study on the hardware structure and software algorithms which is applicable for the commercial engine. Also we developed a Computer-ECU(Personal computer based electronic control unit) using a computer and a microprocessor, for performing the ignition at a desire position(angle) and for controlling a duty ratio a pulse for ISC(Idle speed control). We applied these algorithms to the modeling which is induced a concept of event and got a better result than a conventional ECU in the state of transient as a result of performing air fuel ratio control in a commercial engine. This technique can be used for the back to improve ECU performance. It the present type of Hybrid I. C voltage regulator is altered to the new type of regulator, we will be surely able to reduce the production cost as well as simplify the design of alternator\`s rear bracket and rectifier part because of the removal of trio diode. Experiment is taken by MS-R004.