• 산업융합연구
• /
• 제1권2호
• /
• pp.81-94
• /
• 2003

This study is an empirical analysis of causal relationship that is the effect of strategic importance and orientation of electronic commerce system on performance. Among four industries(financial, retailing wholesaling, service, and manufacturing), financial industry has high level of strategic importance and orientation, that of manufacturing industry is low level. strategic importance has highest effects on strategic orientation. strategic importance and orientation has a positive effects on internal, financial performance significantly. effects of strategic orientation on performance is much than that of strategic importance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.143-145
• /
• 2007

The development of excitation control system (ECS) for emergency diesel generator in nuclear power plant is the replacement project of existing control system to resolve the maintenance problems caused by aging and obsolescence, The excitation control system is classified as a safety-related system. To guarantee the performance of developing excitation control system is equal to or higher than that of other systems, establishing the quality assurance scheme, doing software verification and validation activities, and planning equipment qualification. In this paper, we'd like to introduce the equipment qualification of excitation control system.

• Animal cells and systems
• /
• 제13권4호
• /
• pp.371-379
• /
• 2009

The endocannabinoid system (ECS) plays a key role in the regulation of appetite, body weight and metabolism. We undertook the present study to further clarify the regulation of the cannabinoid CB1 receptor (CB1, CNR1) in human adipose tissue in obesity. CB1 receptor mRNA expression was ~1.6-fold (p<0.004) and 1.9-fold higher (P<0.05) in subcutaneous adipocytes from obese compared to non-obese subjects in microarray and quantitative real-time PCR studies, respectively. Higher CB1 receptor mRNA expression levels in both adipose tissue (~1.2 fold, P<0.05) and adipocytes (~2 fold, P<0.01) were observed in samples from visceral compared to subcutaneous depots collected from 22 obese individuals. Immunofluorescence confocal microscopy demonstrated the presence of CB1 receptor on adipocytes and also adipose tissue macrophages. These data indicate that adipocyte CB1 receptor is up-regulated in human obesity and visceral adipose tissue and also suggest a potential role for the ECS in modulating immune/inflammation as well as fat metabolism in adipose tissue.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.192-201
• /
• 2001

Analyzing internal structure, flow rate and dynamic behavior characteristics of electronically controlled shock absorber, damping performance limit is identified to comprise the two reciprocal characteristics of ride comfort and handling safety. Regardless of its lower performance than the active suspension control system, the semi-active suspension control system has been taking interest because of its absolutely higher performance than passive suspension system. Since the pervious studies have been concentrated mostly on analytic aspect and survey on the internal structure of the shock absorber remain insufficient, the main discourse of this paper is focused on analyzing the nonlinear shock absorber which varies the damping force of semi-active suspension system and the dynamic characteristics of the solenoid valve, a sort of pressure valve, and proposing the design factors of importance.

• Macromolecular Research
• /
• 제8권4호
• /
• pp.179-185
• /
• 2000

Generally vascular grafts with a relatively large inner diameter (> 5 mm) have been successfully employed for replacement in the human body. However, the use of small diameter grafts is limited, because these grafts rapidly occlude due to the thrombosis. The ideal blood-contacting surface of a prosthesis would be an endothelial cell (EC) lining, because the confluent monolayer of healthy ECs that culture natural blood vessels represents the ideal nonthrombogenic surface. For vascular graft application, the stable EC adhesion on surface under How conditions is very important. In this study, the adhesive strength of ECs attached on polymer surfaces coated with collagen type IV (Col IV), fibronectin (Fn), laminin (Ln), and treated with corona was investigated onto polyurethane (PU) films. The EC-attached PU surfaces were mounted on parallel-plate flow chambers in a How system prepared for cell adhesiveness test. Three different shear stresses (100, 150, and 200 dyne/㎠) were applied to the How chambers and each shear stress was maintained for 120 min to investigate the effect of shear stress and surface treatment condition on the EC adhesion strength. It was observed that the EC adhesion strength on the surface-modified PU films was in the order of Ln≡Fn > Col IV > corona 》 control. More than 70% of the adhered cells were remained on surface-modified PU surface after applying the shear stress,200 dyne/㎠ for 2 hrs, whereas the cells were completely detached on the control PU surface within 10 min after applying the same shear stress. It seems that the type of adsorbed proteins and hydrophilicitv onto the PU surfaces play very important roles for cell adhesion strength.

• 한국정보통신학회논문지
• /
• 제23권12호
• /
• pp.1609-1617
• /
• 2019

ECC (Elliptic Curve Cryptography)와 RSA를 기반으로 하는 다양한 공개키 암호 프로토콜 구현을 지원하는 하드웨어 가속기 설계에 관해 기술한다. NIST 표준으로 정의된 소수체 상의 5가지 타원곡선과 3가지 키길이의 RSA를 지원하며 또한, 4가지 타원곡선 점 연산과 6가지 모듈러 연산을 지원하도록 설계되어 ECC와 RSA 기반 다양한 공개키 암호 프로토콜의 하드웨어 구현에 응용될 수 있다. 저면적 구현을 위해 내부 유한체 연산회로는 32 비트의 데이터 패스로 설계되었으며, 워드 기반 몽고메리 곱셈 알고리듬, 타원곡선 점 연산을 위해서는 자코비안 좌표계, 그리고 모듈러 곱의 역원 연산을 위해서는 페르마 소정리를 적용하였다. 설계된 하드웨어 가속기를 FPGA 디바이스에 구현하여 EC-DH 키교환 프로토콜과 RSA 암호·복호 둥작을 구현하여 하드웨어 동작을 검증하였다. 180-nm CMOS 표준 셀 라이브러리로 합성한 결과, 50 MHz 클록 주파수에서 20,800 등가게이트와 28 kbit의 RAM으로 구현되었으며, Virtex-5 FPGA 디바이스에서 1,503 슬라이스와 2개의 BRAM으로 구현되었다.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1116-1124
• /
• 1995

Using a cycle simulation program developed by authors, some thermodynamic characteristics of an aircraft ECS under various operating conditions are studied. When the inlet temperature of cockpit and avionics bay, as well as ram air flow, is held fixed, the effect of the change of regulated bleed pressure is examined. When the regulated bleed pressure, and the cockpit and avionics bay inlet temperature are fixed, the effect of the change of ram air flow is also investigated.

• 해양환경안전학회지
• /
• 제26권2호
• /
• pp.129-138
• /
• 2020

본 연구는 연해구역에서 어선 및 소형선박의 해양사고 예방을 위하여 현행 상선 중심의 항행안전정보(NSI) 제공시스템의 문제점을 인식하고 어선 등 소형선박의 안전항해를 지원하기 위한 효과적인 NSI 제공방안에 관한 연구이다. 주요 연구내용으로 첫째, 최근 해양사고 실태 및 특징을 고찰하고 NSI 중점 제공대상을 식별하였다. 둘째, 현행 NSI의 문제점을 진단하고 통합성·대 국민 접근성·활용성이 강화된 NSI 통합플랫폼(NSIP) 구축방안을 제시하였다. 셋째, NSIP 활용방안으로 한국형 e-Navigation(e-Nav) 사업과 연계하여 개발 중인 e-Nav 선박 단말기에 사용될 전자해도(ECS)에 부가정보 형식으로 다양한 NSI를 적용하고 선박이 항해위험구역 또는 속력제한구역 진입시 자동으로 시청각 알람기능이 작동되도록 설정하는 개선기능을 제안하였다. 이는 관련기관과 GPS플로터 전문제작업체의 전문가 의견을 검토 한 바 기술적으로 가능하며 상용화된 스마트폰 앱에도 적용 가능한 것으로 확인되었다. 본 연구결과의 활용방안은 어선 등 소형선박에 NSI를 제공함으로써 해양사고 예방기능과 함께 e-Nav 서비스에도 적용이 가능한 것으로 판단된다.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.25-32
• /
• 2006

Weapon systems composed of several subsystems execute various engagement missions in distributed combat environments in cooperation with a large number of subordinate/adjacent weapon systems as well as higher echelons through tactical data links. Such distributed weapon systems require distributed real-time simulation test beds to integrate and test their operational software, analyze their performance and effects of cooperated engagement, and validate their requirement specifications. These demands present significant challenges in terms of real-time constraints, time synchronization, complexity and development cost of an engagement simulation test bed, thus necessitate the use of high-performance distributed real-time simulation architectures, and modeling and simulation techniques. In this paper, in order to meet these demands, we presented a distributed real-time simulation system based on High Level Architecture(HLA) and Discrete Event System Specification(DEVS). We validated its performance by using it as a test bed for developing the Engagement Control System(ECS) of a surface-to-air missile system. The proposed technique can be employed to design a prototype or model of engagement-level distributed real-time simulation systems.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.633-641
• /
• 2015

The ROM (roll over mitigation) system is a next-generation suspension system that can improve vehicle-driving stability and ride comfort. Currently, mass-produced safety systems, such as ESC (electronic stability control) and ECS (electronic control suspension), enable measurements of longitudinal and lateral acceleration as well as yaw rate through inertial sensor clusters, but they lack direct measurements of the roll angle. Therefore, in this paper, a roll angle estimation algorithm from ESC system sensors and tire normal force has been proposed. Furthermore, this study presents a method for roll over mitigation force distribution between the front and rear of a ROM system. Performance and reliability of the roll angle estimation and roll over mitigation force distribution were investigated through simulations. The simulation results showed that the proposed control algorithm and strategy are reliable during vehicle rollovers.