• 디지털콘텐츠학회 논문지
• /
• 제12권3호
• /
• pp.391-396
• /
• 2011

최근 5년간, 해양 분야에서는 IT의 접목을 통한 안전운항이 큰 이슈가 되어왔다. 국제해사기구 NAV 위원회에서 정의하는 e-Navigation 전략이 수립되면, 기존 선내 다양한 정보는 필요와 목적에 따라 통합되어 사용되며, 그에 따른, 사용성 평가에 대한 논의가 시작되고 있다. 선박 정보 모니터링은 통합된 디스플레이를 사용하게 되며, 이를 위해서는, 표준에서 요구하는 사용성을 고려해야 한다. 이를 위하여, 본 논문에서는 선박 통합 모니터링을 위한 사용자 인터페이스 설계 가이드라인을 제시한다. 개념 및 요구 사항 분석 그리고 기존 제품의 분석을 바탕으로 선박 통합 모니터링을 위한 사용자 인터페이스 설계의 가이드라인을 제시한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.961-964
• /
• 2008

국내 건설사 및 학계에서는 현재 사회적 문제로 대두되고 있는 화재시 고강도 콘크리트의 안전성 확보를 위한 연구를 진행 중에 있으며, 본 연구소에서도 폭렬 방지 공법인 PFB 공법을 개발하였다. PFB 공법은 POSCO E&C Fire Board 공법으로 무기질계 내화 보드를 접착제로 현장에 시공하는 공법으로 기존 연구에서 3시간 내화시험을 실시한 결과 주근 온도가 200도 이하로 유지되었으며, 콘크리트 및 내화보드에 폭렬 및 기타 손상이 발생되지 않았다. 이에 본 연구에서는 PFB 공법을 현장에 적용하기 위해 실물크기의 목업 시험체(2층 무량판 구조, Span 8m)를 제작하여 내화보드의 현장가공성, 현장 부착강도 시험, 나사못 인발 저항 시험 등을 실시함으로써, 현장 시공전에 기본적으로 검토할 내용에 대한 시험을 실시하였다. 시험결과 PFB 공법은 현장 시공성 및 가공성이 우수한 것으로 조사 나타났고, 구조체 콘크리트와의 부착성능 및 일반 석고보드 대비 나사못 인발시험 성능도 우수한 것으로 조사되어 현장 적용시 문제점은 없는 것으로 조사되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.721-724
• /
• 2008

국내 초고층 프로젝트의 증가에 따라 필연적으로 고강도 콘크리트의 사용이 증가되고 있다. 콘크리트의 강도가 증가됨에 따라 화재시 단면결손을 유발하는 폭렬의 경향성이 커지고, 콘크리트부재 내부의 온도를 현저하게 증가시키며 심각한 구조적 손상을 유발할 수 있다는 문제점이 대두되었고, 정부에서도 2008년 7월부터 고강도 콘크리트의 내화성능 관리기준을 시행하고 있다. 이에 국내 각 건설사들은 50MPa 이상의 고강도 콘크리트에 대하여 폭렬방지 대책을 수립 중에 있다. 본 연구소에서는 신축공사 및 리모델링공사에도 적용이 가능한 고강도 콘크리트 폭렬방지 공법인 PFB (Posco E&C Fire Board) 공법을 개발하여 지속적인 공법 개선에 노력하고 있다. 본 연구는 고강도 콘크리트 폭렬방지 대책으로 개발한 PFB 공법을 기존의 습식공법에서 현장적용성 및 경제성이 우수한 건식화 공법개발을 위한 기초 연구로 PF보드의 기초물성 평가, 3시간 내화시험 및 현장 적용위한 실시 상세 설계를 실시하여 당사 초고층 현장에 적용하기 위한 기본 자료로 활용 하고자 하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

• 한국식품조리과학회지
• /
• 제24권5호
• /
• pp.706-712
• /
• 2008

This study was conducted to evaluate the sanitation level and use of dish cloths, chopping board, and drawer in the refrigerator in 50 university students' houses located in Seoul and Kyonggido. The survey questionnaire evaluated general information, frequency of the washing, cleaning method, drying method and the associated factors. The highest percentage of the cleaning and drying methods of dish cloths were “boiling(76.0%)”, and “dry in the kitchen or on the sink(78.0%)”, respectively. For the chopping board and drawer in the refrigerator, the highest percentage of cleaning method was “use detergent” and drying method was “dry in the kitchen”. The mean of coliforms for dish cloths, chopping board, and drawer in the refrigerator was 4.46${\pm}$1.95 log CFU/100 $cm^2$, 3.92${\pm}$1.64 log CFU/100 $cm^2$, 3.48${\pm}$2.01 log CFU/ 100 $cm^2$, respectively. Salmonella spp. were not detected from all samples. But E. coli were detected from dish cloths(4.0%) and S. aureus were detected from dish cloths(16.0%), chopping board(12.0%), and drawer in the refrigerator(8.0%). The results of microbiological test of kitchen utensils indicated that the sanitary conditions of dish cloths, chopping board, drawer in the refrigerator should be improve promptly.

• Educational Technology International
• /
• 제10권2호
• /
• pp.127-143
• /
• 2009

The purpose of this study was to identify the interaction patterns in distance only mode e-Learning. In order to investigate this study, messages shown in the electronic notice board were analyzed to see how interaction occurs between teacher and learner or learner and learner under the e-learning of cyber university. To analyze messages was applied according to the framework by Henri's contents analysis model. As a result of contents analysis on electronic board, the participative dimension was 399 messages. A learner put on 7~8 messages a day. The number of messages was low compared to the number of learners, but the number of inquiries was about 140. That means that each learner contacts and checks messages at least once a day. The meaning dimension was 600 units. The main interaction patterns were Interactive-social-cognitive-metacognitive. This means that e-Learning in distance only mode leads a positive attitude of learners as a self-directed learning, and needs teacher's well-structured instructional strategies for increasing interaction. In conclusion, social dimension and interactive dimension of messages support learners psychologically in the process of learning though they directly guide learning under the circumstances of e-learning lacking face-to-face element. It can be interpreted that the teacher's role is significantly important in order to attract learners' positive participation and cognitive and meta-cognitive dimension of messages and activities

• 한국정밀공학회지
• /
• 제26권3호
• /
• pp.81-87
• /
• 2009

Lightweight board has been used for manufacturing various fields of automotive interior trims for years. The GMPU board was constructed with glass fiber mat, honeycomb and polyurethane foamed using polyol and isocyanate materials which were sprayed by robot that is interlocked foaming machine. For more lightweight and cost reduction this paper shows how to optimize GMPU process parameters that related to foaming condition, robot position and robot velocity for polyurethane weight. The results show that flexural strength and modulus of board's specimens were evaluated by robot velocity and moving pattern. Based on that, a innovative process was developed for more lightweight and cost reduction.

• Steel and Composite Structures
• /
• 제9권1호
• /
• pp.1-17
• /
• 2009

This paper is focused on the buckling and post buckling behaviour of rectangular corrugated board panels simply supported and subjected to compression load. The aim of the work is to understand the failure mechanism of investigated structure in order to quantify the effect of design parameters on the strength of a panel of given geometry. Two numerical models were developed adopting the finite element method. In the first one the corrugated board is represented by means of shell elements adopting an equivalent material, in the second the local structure is described in full detail modelling both straight and corrugated layers by means of shell elements and representing the connection between layers by special interface elements. The model correctness was checked by the comparison between out of plane central displacement predicted by the models and the experimental values found in literature. For the same case the effect of panel planarity error was evaluated. Finally a parametric analysis to investigate the effect of design parameters was carried out.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.851-854
• /
• 2004

This paper studies Optical Fiber(OF) - LED illuminated display board system for energy saving. The OF-LED illuminated display board system has PV modules, batteries, and charge & discharge system, and dynamic full color display controller. Both maximum power point tracker (MPPT) and constant current & constant current controls (CCVC) are used In govern the charging system. It can be improve the charging efficiency of battery. The objective of this thesis paper is to build advertisement lighting system with OF-LED in to charge a 12-volts lead acid battery by using a field wired PV array. We saved the maintenance cost and developed of advertisement effectiveness. To verify the proposed OF-LED illuminated display board system for energy saving, the detail simulation and experiment results indicate that operating characteristics are verified by experiment with a laboratory prototype in this paper.

• 대한전자공학회논문지SD
• /
• 제46권2호
• /
• pp.24-30
• /
• 2009

본 논문에서는 3GPP(Third Generation Partnership Project) Release 7 eHSPA(High Speed Packet Access for Evolution) UE(User Equipment) FDD(Frequency Division Duplex) 규격을 만족하는 단말 모뎀의 FPGA(Field Programmable Gate Array) 플랫폼 설계 및 이를 기반으로 한 효율적인 검증 방법에 대해 제안한다. 구현된 FPGA 모뎀 플랫폼은 물리 계층 지원을 위한 모뎀 보드, MCU(Micro Controller Unit)와 DSP(Digital Signal Processor) 코어로 구성되어 모뎀 보드를 제어를 위한 제어 보드, 그리고 RF(Radio Frequency) 및 기타 장비 접속을 위한 주변장치(Peripheral) 보드 등으로 구성된다. 그리고 검증 단계는 하드웨어-소프트웨어 연동 상관 정도에 따라 단순 기능 검증, 시나리오 검증 그리고 호 처리 및 시스템 성능 검증 등으로 규정화하여 진행되었고, 실제 구현적인 측면으로 저 전력 SoC(System On a Chip)를 위한 에뮬레이션 검증 기법도 제안한다.