• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.703-711
• /
• 2016

The purposes of this study is to identify the problems arising from current Test & Evaluation process of the naval ship acquisition program and to suggest methods to increase the acquisition efficiency. Considering that the present rule of developmental test &evaluation(DT&E) and operational test & evaluation(OT&E) has caused an inefficiency effect on the acquisition procedures due to the limited practices on it, the DT&E and OT&E procedures through test & evaluation master plan(TEMP) is proposed based on the selective practices of the defense instruction articles. Also, considering characteristics of naval ship acquisitions, efficient procedure systems are derived through case analysis results by comparing each performances of the system. The suggested methods are able to meet the requirements of the changed acquisition environments and also increase efficiency of acquisition systems by adoption of DT&E and OT&E combined test scheme.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.3
• /
• pp.328-333
• /
• 1999

Susceptibility of 61 strains of Helicobacter pylori to metronidazole was examined by both the disk diffusion method using a cut-off of 15㎜ for resistance and the E test with a cut-off of 8㎎/l. The MIC/sub 50/ and MIC/sub 90/ by the E test were 2 ㎎/l and 256㎎/l, respectively. Metronidazole resistance was found in 22 (36％) out of the 61 H. pylori strains by the E test and in three additional strains by the disk diffusion method. Amongst the latter three isolates, the MICs by the E test were 4 ㎎/l, 6㎎/l, and 6㎎/l, respectively. These figures are one log₂ or half log₂ dilution lower than the cut-off of 8㎎/l recommended as resistance for the E test. All 22 metronidazole resistant H. pylori isolates by the E test that were subjected to random amplified polymorphic DNA (RAPD) fingerprinting showed different DNA fingerprints. Interestingly, >90％ of resistant isolates possess two common DNA bands of 0.4 and 0.9 kb. This study demonstrates that the results of the disk diffusion method for testing H. pylori susceptibility to metronidazole correlates well with that of the E test. The criteria for interpretation need to be internationally standardized so that the results from different centers can be compared.

• Information Systems Review
• /
• v.3 no.2
• /
• pp.277-288
• /
• 2001

Of critical importance to the success of any e-commerce site are the two factors: rapid application development and quick response time. A three-tier architecture composed of presentation layer, business layer, and data access layer emerges to allow rapid changes in user interface, business logic, and database structures. Too often, such a logical three-tier architecture is considered as requiring a three-tier physical architecture: Web server, application server, and database server running on separate computers. Contrary to the common belief, a Web stress test reveals that the three-tier logical architecture implemented on a two-tier physical platform guarantees a quicker response time due to the reduction in cross-machine communications. This would lead business firms to economize their spending on e-commerce: increasing the number of physical servers to expedite transaction is not necessarily the best solution. Before selecting a particular hardware configuration, a Web stress test needs to be conducted to compare the relative merits of alternative physical architectures. Together with capacity planning, Web stress test emerges as a powerful tool to build robust, yet economical e-commerce sites.

• Korean Journal of Pharmacognosy
• /
• v.49 no.3
• /
• pp.246-254
• /
• 2018

Pectin lyase-modified red ginseng extract (GS-E3D) is a newly developed ginsenoside Rd-enriched ginseng extract. This study was designed to investigate the skin safety of GS-E3D. Single oral toxicity, single dermal toxicity, bovine corneal opacity and permeability (BCOP) assay, skin irritation test with $SkinEthic^{TM}$ human epidermis model, skin sensitization local lymph node assay, and human patch test, were examined. The oral and dermal $LD_{50}$ value of GS-E3D was over 2,000 mg/kg in rats. GS-E3D was identified as a non-irritant to skin in BCOP assay, human epidermis models, and patch test from the 32 human subjects. The skin sensitization potential of GS-E3D was less than 25% in local lymph node assay. These results indicate that GS-E3D can be used as a safe ingredient without adverse effects in various skin care products.

• Journal of the military operations research society of Korea
• /
• v.31 no.1
• /
• pp.93-106
• /
• 2005

The complexity of modern weapon systems using the IT(intelligence technology) demands that rapid and effective transition from force requirements to deployment and fielding. Thus this paper deals with the DT&E(developmental test & evaluation), OT&E(operational test & evaluation) and SBT(simulation based test) procedure using the case study in the test & evaluation of weapon systems. This study is aimed to produce the effective test & evaluation method of weapon systems in the change of acquisition environment.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.15-20
• /
• 2018

In this study, we have performed the Cone Calorimeter test and Smoke density test in accordance with ISO 5660-1 and ASTM E662 respectively to check the smoke production characteristics of rubber flooring materials for railway vehicle. Early in the ASTM E662 test, more smoke was produced in the flame mode test than non-flame mode test, but later more smoke was produced in non-flame mode test. The correlation($R^2$) between TSR(Total Smoke Release) by ISO 5660-1 and Ds(Specific Optical Density) by ASTM E662 Flame mode was 0.782. The $R^2$ between TSR by ISO 5660-1 and Ds by ASTM E662 Non-flame was 0.930.

• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.37-45
• /
• 2016

PURPOSES : The objective of this study was to develop an impact resonance (IR) test procedure for thin disk-shaped specimens in order to determine the ${\mid}E^*{\mid}$ and phase angle values of various asphalt mixtures. METHODS : An IR test procedure was developed for evaluating thin disk-shaped specimens, in order to determine the dynamic modulus (${\mid}E^*{\mid}$) of various asphalt mixtures. The IR test method that was developed to determine the elastic modulus values of Portland cement concrete was evaluated, which method uses axisymmetric flexural vibration proposed by Leming et al. (1996). The IR tests were performed on three different mixtures of New York with varying nominal maximum aggregate sizes (NY9.5, NY19, and NY25) at six different temperatures ($10-60^{\circ}C$). The ${\mid}E^*{\mid}$ values obtained from the IR tests were compared with those determined by the commonly used AASHTO T342-11 test. RESULTS AND CONCLUSIONS : The IR test method was employed to determine the ${\mid}E^*{\mid}$ values of thin-disk-shaped specimens of various asphalt mixtures. It was found that the IR test method when used with thin disk-like specimens is a simple, practical, and cheap tool for determining the ${\mid}E^*{\mid}$ values of field cores. Further, it was found the ${\mid}E^*{\mid}$ values obtained from the IR tests using thin disk-like specimens were almost similar to those obtained using the AASHTO T342-11 test.

• Journal of Naturopathy
• /
• v.13 no.2
• /
• pp.62-70
• /
• 2024

Background: The antibacterial activity of honey are influenced by the testing method, however little is known about the differences between testing methods. Objective: The aim is to evaluate the antibacterial activities of honey according to the test method. Methods: The antibacterial activity was compared and evaluated according to the dilution concentration of honey using three quantitative test methods (Minimum Inhibition Concentration test: MIC test, Zone Diameter of Inhibition test: ZDI test or Halo Test, and ASTM E2315 Time-Kill Assay) for natural honey samples. Results: In MIC Test, it was confirmed that the growth of both E. coli and S. aureus was inhibited at 25% diluted honey. In ZDI Test, no inhibition zone was observed from the original honey solution for either E. coli or S. aureus. In the Time-Kill assay against E. coli strains, an antibacterial effect of more than 3 log reduction (99.9% reduction) was observed at 50% diluted honey concentration, and a log reduction of < 0.3 (approximately 50% reduction or less) was observed from 6.25% diluted honey. In the Time-Kill assay against S. aureus strains, a 0.5 log reduction (68.4% reduction) was observed at 50% diluted honey concentration, and a log reduction of < 0.3 (approximately 50% reduction or less) was observed from 25% diluted honey. Conclusion: The antibacterial activities of honey showed significant differences depending on the test method. In order to utilize the antibacterial effect of honey, it is necessary to establish a standardized quantitative antibacterial test technique.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.2
• /
• pp.190-197
• /
• 2002

In this thesis, ZnO varistors with various formulation, such as A∼E, were fabricated according to ceramic fabrication method. The microstructure, electrical properties, and surge characteristics of ZnO varistors were investigated according to ZnO varistors with various formulation. In the microstructure, A∼E\`s ZnO varistor ceramics sintered at 1130$\^{C}$ was consisted of ZnO grain(ZnO), spinel phase (Zn$\_$2.33/Sb$\_$0.67/O$\_$4/), Bi-rich phase(Bi$_2$O$_3$) and intergranuler phase, wholly. Lightning impulse residual voltage of A, B, C and E\`s ZnO varistors suited standard characteristics, below 12kV at current of 5kA. On the contrary, D\`s ZnO varistor exhibited high residual voltage as high reference voltage. In the accelerated aging test, leakage current and watt loss of B, C and D\`s ZnO varistors increases abruptly with stress time under the first a.c. stress(115$\^{C}$/3.213kV/300h). Consequently, C varistor exhibited a thermal run away. On the contrary, leakage current and watt loss of A and C\`s ZnO varistors which show low initial leakage current exhibited constant characteristics. After high current impulse test, A\`s ZnO varistor has broken the side of varistor but impulse current flowed. On the contrary, E\`s ZnO Varistor exhibited good discharge characteristics which the appearance of varistor was not wrong such as puncture, flashover, creaking and other significant damage. After long duration impulse current test, E\`s ZnO varistor exhibited good discharge characteristics which the appearance of varistor was not wrong such as puncture, flashover, creaking and other significant damage. After high current impulse test and long duration impulse current test, E\`s ZnO varistor exhibited very good characteristics which variation rate of residual voltage is 1.4% before and after test.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.901-911
• /
• 2015

This article starts with a review of the e-self directed learning, future time perspective and decision making, especially in relation to the career myths. In particular, we empirically analyzed the factors affecting the future time perspective and the decision making on the characteristics of career myths(e.g. relatedness of the test myths, the supreme myth and the family myths). Hence the main purpose of this article is to suggest an empirical model explaining how these factors affect e-self directed learning to future time perspective and decision making. Furthermore, we suggested an expanded model about future time perspective, decision making and especially in relation to the career myths. We founded that the e-self directed learning significantly affect the future time perspective and the decision making, also the future time perspective affect the test myths and family myths except the supreme myths and the decision making significantly affect the career myths(i.e., the test myths, the supreme myth, the family myths).