DOI QR코드

DOI QR Code

Determination of Dynamic Modulus of Thin-Disk-Shaped Asphalt Concrete Specimens Using Impact Resonance Test

충격공진시험을 활용한 얇은 원판형 아스팔트 콘크리트 시편의 탄성계수 결정

  • 김다혜 (노스캐롤라이나 주립대학교 토목공학과) ;
  • 임정혁 (경기도 건설국 건설안전과) ;
  • 김영수 (노스캐롤라이나 주립대학교 토목공학과)
  • Received : 2016.05.12
  • Accepted : 2016.06.20
  • Published : 2016.08.16

Abstract

PURPOSES : The objective of this study was to develop an impact resonance (IR) test procedure for thin disk-shaped specimens in order to determine the ${\mid}E^*{\mid}$ and phase angle values of various asphalt mixtures. METHODS : An IR test procedure was developed for evaluating thin disk-shaped specimens, in order to determine the dynamic modulus (${\mid}E^*{\mid}$) of various asphalt mixtures. The IR test method that was developed to determine the elastic modulus values of Portland cement concrete was evaluated, which method uses axisymmetric flexural vibration proposed by Leming et al. (1996). The IR tests were performed on three different mixtures of New York with varying nominal maximum aggregate sizes (NY9.5, NY19, and NY25) at six different temperatures ($10-60^{\circ}C$). The ${\mid}E^*{\mid}$ values obtained from the IR tests were compared with those determined by the commonly used AASHTO T342-11 test. RESULTS AND CONCLUSIONS : The IR test method was employed to determine the ${\mid}E^*{\mid}$ values of thin-disk-shaped specimens of various asphalt mixtures. It was found that the IR test method when used with thin disk-like specimens is a simple, practical, and cheap tool for determining the ${\mid}E^*{\mid}$ values of field cores. Further, it was found the ${\mid}E^*{\mid}$ values obtained from the IR tests using thin disk-like specimens were almost similar to those obtained using the AASHTO T342-11 test.

Keywords

References

  1. American Association of State Highway Transportation Officials (AASHTO) (2011). AASHTOT 342-11: Standard Method of Test for Determining Dynamic Modulus of Hot-Mix Asphalt Concrete Mixtures. AASHTO, Washington, D.C.
  2. Clough, R. W. and J. Penzien, (1993). Dynamics of Structures, McGraw-Hill, Inc., Second Edition, ISBN 0-07-011394-7.
  3. Hutchinson, J.R. (1979). Axisymmetric Flexural Vibrations of a Thick Free Circular Plate. Journal of Applied Mechanics, ASME, 46, pp.39-144.
  4. Kweon, G. and Y. R. Kim (2006). Determination of the Complex Modulus of Asphalt Concrete Using the Impact Resonance Test. Transportation Research Record 1970, National Research Council, Washington, D. C., pp.151-160.
  5. LaCroix A., Y.R. Kim, and M.S. Sakhaei Far (2009). Constructing the Dynamic Modulus Mastercurve Using Impact Resonance Testing. Journal of Association of Asphalt Paving Technologists, Vol.78, pp.67-102.
  6. Leming, M.L. and J. Nau (1996). Nondestructive Determination of the Dynamic Modulus of Concrete Disks. ACI Materials Journal, 95-M6, pp.50-57.
  7. Sakhaei Far, M. S. (2011). Development of New Dynamic Modulus Predictive Models for Hot Mix Asphalt Mixtures. Ph.D. Dissertation, North Carolina State University, Raleigh, NC.
  8. Whitmoyer, S.L. and Y.R. Kim (1994). Determination of Elastic Properties of Asphalt Concrete Using Vibrational Analysis. ASTM Journal of Testing and Evaluation, 22(2), pp.139-148. https://doi.org/10.1520/JTE12648J