• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1058-1063
• /
• 2020

본 논문은 생체 신호 및 센서 신호 처리를 위하여 저전력으로 동작하는 12비트 SAR A/D 변환기를 제안한다. 기존의 SAR A/D 변환기의 전력소모를 줄이고자, 동적 전류를 감소시켜 전체 전력 소모를 감소시켰다. 동적 전류를 감소시키기 위해서 C-DAC 비트 스위치를 동작시키는 샘플링 시간을 클럭 생성기의 샘플링 시간과 다르게 인가하였다. 추가적으로 SAR A/D 변환기의 전체 전력소모 중 70%를 차지하는 디지털 블록의 공급전압을 0.6V로 낮춰 설계하였다. 제안하는 SAR A/D 변환기는 CMOS 65nm 공정 1-poly 6-metal을 사용하여 설계하였으며, 1.2V의 공급전압으로 동작하며, ENOB는 10.1 비트, INL/DNL은 ±0.5LSB/±1.2LSB이며, 전체 전력소모는 31.2uW이고 FoM은 2.8fJ/step 이다.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.40-47
• /
• 2014

An average current mode control scheme that consistently offers good dynamic performance for LLC series resonant DC-to-DC converters irrespective of the changes in the operational conditions is presented in this paper. The proposed control scheme employs current feedback from the resonant tank circuit through an integrator-type compensation amplifier to improve the dynamic performance and enhance the noise immunity and reliability of the feedback controller. Design guidelines are provided for both current feedback and voltage feedback compensation. The performance of the new control scheme is demonstrated through an experimental 150 W converter operating with 340 V to 390 V input voltage to provide a 24 V output voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2023-2027
• /
• 1997

This paper presents the dynamic analysis and control-loop design of a zero-voltage-switched full bridge (ZVS-FB) PWM dc/dc converter. Based on the small-signal analysis results, the control-loop is designed using a simple two-pole one-zero compensation circuit. Design results are verified by both computer simulations and experimental data obtained from a 2kW prototype converter.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1988-1994
• /
• 2014

In a single-phase grid-connected power system consisting of a DC/DC converter and a DC/AC converter, the current drawn from renewable energy sources has a tendency to be pulsated and contains second-order frequency ripple components, which results in several drawback such as a power harvesting loss and a shortening of the energy source's life. This paper presents a new second-order harmonic current reduction scheme with a fast dc-link voltage loop for two-stage dc-dc-ac grid connected systems. In the frequency domain, an adequate control design is performed based on the small signal transfer function of a two-stage dc-dc-ac converter. To verify the effectiveness of proposed control algorithm, a 1 kW hardware prototype has been built and experimental results are presented.

• 대한전자공학회논문지SD
• /
• 제47권5호
• /
• pp.16-23
• /
• 2010

본 논문에서는 무선통신시스템의 수신단에 적용될 수 있는 6비트 250MS/s 플래쉬 A/D 변환기를 설계하였다. 제안하는 플래쉬 A/D 변환기는 기준 저항열에 입력전압범위 감지회로를 사용하여 비교기에서 소모하는 동적소비전력을 최소화 되게 설계하였다. 기존 플래시 A/D 변환기보다 아날로그단 소비전력은 4.3% 증가한 반면에, 디지털단 소비전력은 1/7로 감소하여 전체 소비전력은 1/2 정도로 감소하였다. 설계된 A/D 변환기는$0.18{\mu}m$ CMOS 1-poly 6-metal 공정으로 제작되었으며 측정 결과 입력 범위 0.8Vpp, 1.8V의 전원 전압에서 106mW의 전력소모를 나타내었다. 250MS/s의 변환속도와 30.27MHz의 입력주파수에서 4.1비트의 유효비트수를 나타내었다.

• 전력전자학회논문지
• /
• 제12권3호
• /
• pp.234-240
• /
• 2007

본 논문에서는 비대칭 컨버터에 비하여 전력소자의 수를 감소하면서도, 고속 운전에 적합한 새로운 멀티레벨 인버터를 제안한다. 제안된 인버터는 기존의 비대칭 컨버터에 비하여 전력소자의 수를 감소시킬 수 있는 특징이 있으며, SRM의 감자구간에서 휠링되는 에너지와 전원에서 공급되는 에너지를 교차적으로 활용하는 방식을 적용함으로써, C-dump 인버터에 비해 커패시터의 정격전압을 낮출 수 있는 장점이 있다. 또한, 제안된 멀티레벨 인버터의 동작 모드는 비대칭 컨버터에 비하여, 충전 레벨의 전원을 정역으로 활용하여 빠른 여자(Excitation)와 감자(Demagnetization) 모드를 가지게 되므로, 제어의 활용성이 매우 높다. 따라서, SRM의 고속 운전에 필요한 여자전류의 빠른 확립을 통하여 응답시간을 개선시키며, 토크 발생구간을 확장시킬 수 있다. 제안된 멀티레벨 인버터 구동형 SRM의 운전특성은 시뮬레이션과 실험을 통해 검증하였다.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.451-459
• /
• 2022

Recently, in accordance with the demand for a large capacity of a secondary battery according to an increase in the demand for energy storage devices, a modular series battery configuration is essential. Accordingly, various cell balancing techniques have been proposed to prevent high efficiency and performance degradation of the battery. In this paper, propose a battery voltage balancing topology consisting of a flyback DC/DC converter type of a SIMO (Single-Input-Multiple Output) two-switch configuration for a series battery configuration. The proposed topology shows a structure in which a DC/DC converter connected to each module and a battery cell share one transformer. The topology cell balancing operation is a principle in which the voltage balancing converter of the battery converges to the same value through a transformer that shares a magnetic flux with the cells constituting the module through a single high-frequency transformer. In this paper, the dynamic characteristics analysis of the proposed circuit using PSIM was based and it was verified through experiments on one module.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2045-2056
• /
• 2016

The input impedances of pulse width modulated (PWM) dc-to-dc converters, which dictate the outcomes of the dynamic interaction between dc-to-dc converters and their source subsystem, are analyzed in a general and unified manner. The input impedances of three basic PWM dc-to-dc converters are derived with both voltage mode control and current mode control. This paper presents the analytical expressions of the 24 input impedances of three basic PWM dc-to-dc converters with the two different control schemes in a factorized time-constant form. It also provides a comprehensive reference for future dynamic interaction analyses requiring knowledge of the converters' input impedances. The theoretical predictions of the paper are all supported by measurements on prototype dc-to-dc converters. The use of the presented results is demonstrated via a practical application example, which analyzes the small-signal dynamics of an input-filter coupled current-mode controlled buck converter. This elucidates the theoretical background for the previously-reported eccentric behavior of the converter.

• 대한전기학회논문지
• /
• 제39권9호
• /
• pp.934-943
• /
• 1990

There are no turn-on losses in the series Resonant Converter which operates above the resonance frequency, and the commutation stress on the switched component is low. For a given Series Resonant Converter with specified load resistance, the output voltage is a function of the operation frequency. This paper describes the static and dynamic characteristic analysis of the Series Resonant DC to DC Converter, which is operating above the resonant frequency, with frequency control. For the analysis method, state plane technique is adopted, and the circuit operation is defined from normalized switching frequency, Fsn. Under this condition, circuit performance is analyzed ideally. The validity of the proposed analysis is verified by comparing with experimental results, the stability of the converter is confirmed against small variations around the operating point by conventional frequency domain analysis, and the stress quantity added to switch component is shown.

• 전기학회논문지
• /
• 제65권8호
• /
• pp.1400-1406
• /
• 2016

This paper presents a new adaptive converter control approach for electric motor systems whose voltage source is excited from photovoltaic (PV) power generators. First, an electric model is represented with dynamic states and output velocity of such DC motor systems. We propose a hybrid converter control law in which a state feedback control is applied as an auxiliary control framework. Moreover, control parameter estimation is derived to realize adaptive converter systems for effective control performance against stochastic PV power excitation in practice. We carry out stability analysis for such converter system by using a well-known eigenvalue theory. Lastly, numerical simulation is conducted to test reliability of the proposed converter control approach and prove its superiority in the control point of view.