• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권6호
• /
• pp.428-434
• /
• 2004

Coarse clumping of solid materials within diseased biological cells can have a marked influence on the light scattering pattern. Perturbations in refractive index lead to distinct varia­tions in the cytometric signature, especially apparent over wide scattering angles. The large dynamic range of scattering intensities restricts collection of data to narrow angular intervals be­lieved to have the highest potential for medical diagnosis. We propose the use of an interfer­ence filter to reduce the dynamic range. Selective attenuation of scattering intensity levels is expected to allow simultaneous data collection over a wide angular interval. The calculated angu­lar transmittance of a commercial shortwave-pass filter of cut-off wavelength 580 nm indicates significant attenuation of scattering peaks below ${\~}\;10^{circ}$, and reasonable peak equalization at higher angles. For the three-dimensional calculation of laser light scattered by cells we use a spectral method code that models cells as spatially varying dielectrics, stationary in time. How­ever, we perform preliminary experimental testing with the interference filter on polystyrene microspheres instead of biological cells. A microfluidic toolkit is used for the manipulation of the microspheres. The paper intends to illustrate the principle of a light scattering detection system incorporating an interference filter for selective attenuation of scattering peaks.

• Journal of Pharmaceutical Investigation
• /
• 제17권1호
• /
• pp.41-46
• /
• 1987

Oil in water microemulsion containing soybean oil and egg phosphatide was prepared by vacuum high shear mixing and high pressure homogenizing. The laser particle sizer, Coulter counter and photomicroscope were used to determine the particle size distribution at each cycle of homogenizing. Particularly, the laser particle sizer(dynamic light scattering method) was applied to the study of particle size distribution behavior below $1\;{\mu}m$. It was found that the particle size distribution below $1\;{\mu}m$ was shifted to lower size range as the number of passing cycle was increased. Beyond the 7th cycle, however, the particle size distribution was not varied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1711-1714
• /
• 2006

Anchoring energy of liquid crystals on solid substrates is a key parameter in liquid crystal technology. A nonperturbative method of its measurement by dynamic light scattering on thermal orientational fluctuations is presented, The ratio of the zenithal and azimuthal anchoring coefficients is shown to be equal to the ratio of the orientational elastic constants.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.169-173
• /
• 2007

During laser irradiation, mechanically deformed cartilage undergoes a temperature dependent phase transformation resulting in accelerated stress relaxation. Clinically, laser-assisted cartilage reshaping may be used to recreate the underlying cartilaginous framework in structures such as ear, larynx, trachea, and nose. Therefore, research and identification of the biophysical transformations in cartilage accompanying laser heating are valuable to identify critical laser dosimetry and phase transformation of cartilage for many clinical applications. quasi-elastic light scattering was investigated using Ho : YAG laser $(\lambda=2.12{\mu}m\;;\;t_p\sim450{\mu}s)$ and Nd:YAG Laser $(\lambda=1.32{\mu}m\;;\;t_p\sim700{\mu}s)$ for heating sources and He : Ne $(\lambda=632.8nm)$ laser, high-power diode pumped laser $(\lambda=532nm)$, and Ti : $Al_2O_3$ femtosecond laser $(\lambda=850nm)$ for light scattering sources. A spectrometer and infrared radiometric sensor were used to monitor the backscattered light spectrum and transient temperature changes from cartilage following laser irradiation. Analysis of the optical, thermal, and quasi-elastic light scattering properties may indicate internal dynamics of proteoglycan movement within the cartilage framework during laser irradiation.

• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.403-405
• /
• 1987

A dynamic laser light scattering system has been constructed using a personal computer. The intensity of the scattered light was detected with a photomultiplier tube and a photon counter. The BCD output of the photon counter which is proportional to the intensity of scattered light is fed into a personal computer via an interface card. The personal computer was programmed as an autocorrelator in machine language. The data acquisition rate of the system was about 600 samples/s which is adequate for studies on the molecular dynamics of concentrated polymer solutions, polymer latices with large particle size, and polymer glass systems. The constructed system was tested with polystyrene latex and the measured diameter of the latex particle agrees well with the supplier's value.

• 한국고분자학회지:고분자과학과기술
• /
• 제1권5호
• /
• pp.289-307
• /
• 1990

• 한국광학회지
• /
• 제3권3호
• /
• pp.167-171
• /
• 1992

소금물에 유도된 콜로이드 실리카 응집체의 재구조에 대한 정적 및 유동 광산란 결과를 나타냈다. 또한 투과전자현미경을 이용한 사진결과로부터 입자들 각각의 크기 및 그물 모양으로 갈라진 응집체에 관한 미세구조를 확인하였다. 재구조화된 실리카 응집체에 대한 프랙탈 차원들은 현상태 광산란 측정결과들과 상당히 달랐다. 소금물에 유도된 0.5wt.% 농도의 Ludox-AM에 대한 프랙탈 차원 $D_{F}$는 2.21로 측정되었다. 0.1wt.% 농도의 Ludox-AM에 대한 Rayleigh 선폭을 논의한다.

• 한국진공학회지
• /
• 제14권3호
• /
• pp.143-146
• /
• 2005

본 연구에서는 결맞는 x-선을 이용하여 표면의 거동 현상을 관찰할 수 있는 새로운 실험 방법인 x-선 상관 분광법(x-ray photon correlation spectroscopy)을 소개하고 이를 이용하여 측정한 고분자 박막에서의 거동 현상에 대한 결과를 보고하고자 한다. 이 방법은 파장이 짧은 x-선 영역에 동역학 광산란(dynamic light scattering) 원리를 적용하여 나노 스케일의 동역학 현상을 관찰할 수 있다. 또한 x-선 산란을 이용하므로 동역학 현상과 동시에 구조 특성을 측정할 수 있다. 본 논문에서는 글래스 전이보다 높은 온도에서, 기판에 코팅된 고분자 박막의 표면 거동현상을 온도와 파수의 함수로 측정하였다. 박막의 두께가 두꺼울 때에는 점성이 높은 액체에서와 계산된 이론에서와 같은 표면 거동 현상이 관찰되었고, 얇은 박막에서는 갇힘 현상에 의한 효과를 관찰하였다.

• 한국식품영양과학회지
• /
• 제46권5호
• /
• pp.653-658
• /
• 2017

본 연구에서는 동적광산란법을 이용하여 아밀로즈 함량과 용매 조건에 따른 전분 분자 구조 변화를 규명하였다. 분자량이 다른 여러 가지 덱스트란 표준물질을 이용하여 동적광산란법의 정확성을 검증하였으며, 이를 전분에 적용해본 결과 아밀로즈 함량에 따른 전분 분자의 $D_h$ 변화를 규명할 수 있었고 아밀로즈 함량이 높아질수록 전분 분자의 $D_h$ 값이 증가하였다. 또한, 용매 조건에 따른 전분 분자의 $D_h$ 변화를 동적광산란법으로 규명할 수 있었으며, NaCl의 경우 농도가 높아질수록 아밀로펙틴의 $D_h$가 증가했지만, 아밀로즈의 $D_h$는 urea에 더 큰 영향을 받는 것으로 생각된다. 1-Butanol의 경우 전분 분자의 $D_h$를 증가시켰지만 주목할 만한 경향은 관찰하지 못하였다. 또한, 전분의 아밀로즈 함량과 전분 분자의 $D_h$는 유의적인 상관관계를 보였으며, 이를 활용할 경우 전분의 아밀로즈 함량을 예측하는 데 도움이 될 수 있을 것이라고 기대한다.

• 분석과학
• /
• 제32권3호
• /
• pp.77-87
• /
• 2019

High viscosity carbon black dispersions are used in various industrial fields such as color cosmetics, rubber, tire, plastic and color filter ink. However, carbon black particles are unstable to heat due to inherent characteristics, and it is very difficult to keep the quality of the product constant due to agglomeration of particles. In general, particle size analysis is performed by dynamic light scattering (DLS) during the dispersion process in order to select the optimum dispersant in the carbon black dispersion process. However, the existing low viscosity analysis provides reproducible particle distribution analysis results, but it is difficult to select the optimum dispersant because it is difficult to analyze the reproducible particle distribution at high viscosity. In this study, dynamic light scattering (DLS) and asymmetrical flow field-flow fractionation (AsFlFFF) analysis methods were compared for reproducible particle size analysis of high viscosity carbon black. First, the stability of carbon black dispersion was investigated by particle size analysis by DLS and AsFlFFF according to milling time, and the validity of analytical method for the selection of the optimum dispersant useful for carbon black dispersion was confirmed. The correlation between color and particle size of particles in high viscosity carbon black dispersion was investigated by using colorimeter. The particle size distribution from AsFlFFF was consistent with the colorimetric results. As a result, the correlation between AsFlFFF and colorimetric results confirmed the possibility of a strong analytical method for determining the appropriate dispersant and milling time in high viscosity carbon black dispersions. In addition, for nanoparticles with relatively broad particle size distributions such as carbon black, AsFlFFF has been found to provide a more accurate particle size distribution than DLS. This is because AsFlFFF, unlike DLS, can analyze each fraction by separating particles by size.