• 소음진동
• /
• 제1권2호
• /
• pp.121-128
• /
• 1991

In order to use viscoelastic materials efficiently for noise and vibration control, or th qualify newly developed materials, knowledge of the Young' s modulus and loss factor is essemtial. These material properties, the so-called complex Young' s modulus, are frequently treated as dynamic charicteristics because of their dependence upon the frequency. Many techniques have been developed and verified for measuring complex Young' s modulus of viscoelastic materials. Among them, the impedance method is preferable in order to obtain the frequency information in detail. In this method, a cylindrical or prismatic specimen is excited into longitudinal harmonic vibration at one end, the other being fixed, and the resulting force is measured at the driving or fixed end. The amplitude ratio of the two signals and phase angle between them are then used to compute the material properties using various mathematical models. In this paper, the impedance method is investigated theoretically and experimentally. A way to determine the specimen geometry which is most appropriate for the identification of complex Young' s modulus using the lumped mass model is presented and discussed. Then experimental results supporting the theoretical predictions are presented.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.466-466
• /
• 2013

Quantum-dot materials have introduced novel applications in organic light-emitting diodes and solar cells. The size controllability and structure modifications have continuously been upgrading the applicability to optoelectronic and flat-panel displays. In particular, quantum-dot organic light-emitting diodes (QLEDs) are a device driven through the electrical field applied to the electrical diodes. The QLEDs are affected by the constituent materials and the corresponding device structures. Conventionally, the electrical properties are characterized only in terms of dc-based current-voltage characteristics. The dynamic change in light-emitting diodes should be characterized in emitted and non-emitted states. Therefore, the frequency-dependent impedance can offer different information on the electrical performance in QLED. The current work reports an auxiliary information on the electrical and optical features originating from quantum-dot organic light-emitting diodes. The empirical characterizations are discussed towards an experimental tool in optimizing the light-emitting diodes.

• 한국정보통신학회논문지
• /
• 제7권3호
• /
• pp.485-491
• /
• 2003

본 논문에서는 디지털 위성방송 지상 리피터에 적용하고자 고 이득 저 잡음특성을 갖는 소형 채널증폭기를 설계하였다. 채널증폭기를 설계함에 있어서 각각의 증폭 단에서의 잡음지수와 이득 및 안정도를 서로 절충하여 최적화 시켰다. 채널증폭기는 첫째 단에서 저 잡음특성을 나타내도록 임피던스를 정합시켰으며 둘째 단 이상에서는 균일한 이득과 고 안정 동작상태를 유지하고 최종 출력 단에서 고 이득특성을 나타내었다. 설계된 6단의 고 이득 저잡음특성을 나타내는 채널증폭기에 대하여 디지털 위성방송 지상주파수 11.7GHz∼12.7GHz의 대역에서 실험한 결과 68dB의 증폭이득과 2.4dB의 잡음지수를 나타내었으며 63dB의 동작범위를 나타내어 위성방송 지상리피터용 채널증폭기에 적용할 수 있음을 확인하였다.

• 전력전자학회논문지
• /
• 제5권5호
• /
• pp.435-442
• /
• 2000

리튬폴리머전지의 전기적인 특성을 평가하고 이것을 시스템 측면에서 고찰할 수 있는 이론적인 토대를 마련하기 위하여 본 논문에서는 전지의 전기적인 특성평가를 위한 전기적모델링 기법에 관하여 고찰하였다. 실제 제작된 리튬폴리머전지의 특성자료를 바탕으로 R-L-C 모델을 이용한 동적해석방식과 PSpice 모델을 이용한 정적해석방식을 통하여 리튬폴리머전지의 전기적 특성을 해석하였다. 각 모델의 풍/방전시의 전기적 특성을 고찰하고 충/방전조건에 따른 전지의 단자전압등 특성변수의 변화를 실제 제작된 리튬폴리머전지와 비친, 검토하여 그 타당성을 검증하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권9호
• /
• pp.531-538
• /
• 2005

This paper proposes an expert system which is able to enhance the accuracy and productivity by determining the test strategy based on heuristic rules for test of the hybrid electronic circuit board producted massively in production line. The test heuristic rules are obtained from test system designer, test experts and experimental results. The guarding method separating the tested device with circumference circuit of the device is adopted to enhance the accuracy of measurements in the test of analog devices. This guarding method can reduce the error occurring due to the voltage drop in both the signal input line and the measuring line by utilizing heuristic rules considering the device impedance and the parallel impedance. Also, PSA(Parallel Signature Analysis) technique Is applied for test of the digital devices and circuits. In the PSA technique, the real-time test of the high integrated device is possible by minimizing the test time forcing n bit output stream from the tested device to LFSR continuously. It is implemented in Visual C++ computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique, the interface with the electronic circuit database and the hardware direct control. Finally, the effectiveness of the builded expert system is proved by simulating the several faults occurring in the mounting process the electronic devices to the surface of PCB for a typical hybrid electronic board and by identifying the results.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.299-308
• /
• 2015

This study proposes four novel pulse width modulation (PWM) shoot-through control methods for impedance source (IS) galvanically isolated DC-DC converters. These methods are derived from a PWM control method with shifted shoot-through introduced by the authors in 2012. In contrast to the baseline solution, where the shoot-through states are generated by the simultaneous conduction of all transistors in the inverter bridge, our new approach is based on the shoot-through generation by one inverter leg. The idea is to increase the number of soft-switched transients and, therefore, decrease the dynamic losses of the front-end inverter. All the proposed approaches are experimentally verified through an insulated-gate bipolar transistor-based IS DC-DC converter. Conclusions are drawn in accordance with the results of the switching loss analysis.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.923-930
• /
• 2010

Finite element models of dynamic systems can be updated in two stages. In the first stage, mass and stiffness matrices are updated neglecting damping, and in the second stage, damping matrices are estimated with the mass and stiffness matrices fixed. Three methods to estimate damping matrices for this purpose are proposed in this paper. The methods include one for proportional damping systems and two for non-proportional damping systems. Method 1 utilizes orthogonality of normal modes and estimates damping matrices using the modal parameters extracted from the measured responses. Method 2 estimates damping matrices from impedance matrices which are the inverse of FRF matrices. Method 3 estimates damping using the equation which relates a damping matrix to the difference between the analytical and measured FRFs. The characteristics of the three methods are investigated by applying them to simulated discrete system data and experimental cantilever beam data.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.203-230
• /
• 2012

This paper presents results for impedance (and compliance) functions and input motions of foundations in a layered half-space computed on the basis of a procedure that combines a consistent transmitting boundary with continued-fraction absorbing boundary conditions which are accurate and effective in modeling wave propagation in various unbounded domains. The effects of obliquely incident seismic waves in a layered half-space are taken into account in the formulation of the transmitting boundary. Using the numerical model, impedance (and compliance) functions and input motions of rigid circular foundations on the surface of or embedded in a homogeneous half-space are computed and compared with available published results for verification of the procedure. Extrapolation methods are proposed to improve the performance in the very-low-frequency range and for the static condition. It is concluded from the applications that accurate analysis of foundation dynamics and soil-structure interaction in a layered half-space can be carried out using the enhanced consistent transmitting boundary and the proposed extrapolations.

• 한국음향학회지
• /
• 제26권6호
• /
• pp.276-285
• /
• 2007

본 논문에서는 현재까지 주파수 영역에서 개발된 4종류의 라우드스피커 TS 매개변수 규명법들에 대하여 비교 검토하였다. 보이스 코일 인덕터에 대한 상세한 모델링을 위해 주파수 종속 모델링 기법을 소개하였고 관련된 매개변수들을 유도하였다. 라우드스피커의 동적 질량을 알고 있을 때에 TS 매개변수를 규명하는 방법을 소개하고 이를 실제 라우드스피커에 적용할 때에 고려할 사항들도 기술하였다. 1채널 장비로 전기 임피던스를 측정할 때에는 크기만을 측정하게 되므로 위상값 추정을 위해 최소 위상 변환법을 사용하는 방법도 기술하였다.

• 전기화학회지
• /
• 제10권3호
• /
• pp.196-202
• /
• 2007

본 연구에서는 고분자 전해질 연료전지의 가습조건의 변화에 따른 정상상태 및 비정상상태 운전특성을 살펴보았다. 전압을 OCV에서 0.25 V까지 변화시키면서 PEFC 연료전지의 정상상태 성능을 정전압 모드에서 측정하여 전류-전압 곡선에 나타내어 고찰하였다. 또한, 일부 전압조건에서 연료전지의 비정상상태 성능변화를 측정하였다. 수소극 가습에 따른 성능을 평가하기 위하여 공기극은 건조공기를 공급한 상태에서 수소극에 공급되는 수소의 습도를 20%에서 100%로 변화시키면서 연료전지의 성능을 측정하였다. 일반적으로 고전압 영역에서는 높은 작동온도가 높은 성능을 나타내고 있으나, 저전압 영역에서는 낮은 작동온도가 높은 성능을 나타내었다. 임피던스 측정을 통하여 건조한 전해질막 조건에서 ohmic 손실이 커지며 외부가습과 자체가습량이 커지면 저주파수 영역에서 물질전달손실 효과가 나타나는 것을 확인하였다. 또한, 전압을 감소시킨 후 전류의 시간에 따른 변화를 고찰하여 연료전지 시스템의 동적특성을 고찰하였다. 전압을 감소시킨 경우, 작동온도의 상승에 따라서 정상상태에 도달하는 시간이 줄어들었으며, 저전압 영역을 제외하면 생성된 물에 의한 자체가습은 정상상태 도달시간을 지연시키는 효과를 가져왔다.