• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.149-158
• /
• 1999

The modern trends of optical storage devices can be characterized by high density in information recording, and high bandwidth in data input/output processing rate. These make servo engineers to face with a new barrier on control system design in much more difficult way. The first step to attack this barrier will be through a systematic modeling for the dynamic characteristics of optical storage drive. in this paper, an analytical dynamic model for an optical storage drive based on FEM is drived, and compared with experimental results. Through this comparison, a practical dynamic model on the focusing and tracking motion of optical storage drive is proposed for the initiation of real control system design problem.

• Asia pacific journal of information systems
• /
• v.15 no.1
• /
• pp.25-44
• /
• 2005

This study examines control types of IS outsourcing project management focusing on two sets of questions: What control types are implemented during IS outsourcing projects? How various control types affect the performance of IS outsourcing projects. In order to meet these objectives, four control types are developed using typology-approach: dynamic, contract-oriented, partnership-oriented, and passive. And then four control types are identified based on taxonomy-approach using cluster analysis from 66 projects: dynamic, contract-oriented, passive, and middle. The result shows that the derived taxonomy-types are similar to the typology-types except partnership-oriented type. The result also indicates that dynamic and contract-oriented types are in the highest performance, while passive type is in the least performance.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2688-2691
• /
• 2008

This study addresses a microfluidic method to uniformly form diacetylene (DA) liposomes and control their size. DA liposomes are biochemical sensor materials with a unique property such that when they are polymerized to polydiacetylene (PDA) they exhibit non-fluorescent blue to fluorescent red phase transition upon chemical or thermal stress. The liposome size and distribution are important because they significantly affect the phase transition. So far, DA Liposomes, have been prepared by mixing of bulk phases leading to heterogeneous, polydisperse distribution in size. Therefore, additional post-processes are required such as sonication or membrane extrusion to obtain an appropriate size of liposomes. Here, we report a novel strategy using a microfluidic chip and hydrodynamic focusing to form DA liposomes and control their size. Preliminary results obtained by scanning electron microscope (SEM) and dynamic light scattering (DLS) show that the microfluidic strategy generates more monodispersed liposomes than a bulk method.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.15-21
• /
• 1998

Mostly a ride comfort and handling performance of vehicle is influenced by dynamic behavior control of vehicle. We are focusing on development of a semi-intelligent suspension system with continuously variable damper(HS-SH type). only using absolute velocity of sprung mass without using the relative velocity besides having lower system prices and a little energy requirement. In this paper, the system is realized in consideration to control strategy (sky-hook control, hybrid filter, etc.) and has been proved to have improvement of behavior control of vehicle by quarter car and Vehicle test, respectively.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.2
• /
• pp.117-122
• /
• 2006

A novel method to find interaction dynamics between focusing direction and tracking direction in an optical pick-up is proposed. and the decoupling control to reduce the interaction effect is discussed. First, the basic principle to detect dynamic interaction analysis using back electromotive force is introduced. Second, the interaction analysis between focusing and tracking direction of is analyzed for a commercial slim type optical pick-up. Finally. decoupling control process and its simulation results are shown.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.116-122
• /
• 2012

The purpose of this study is on the development of 3-D conductive pattern fabrication system using laser. For development 3-D direct patterning system, we used the dynamic focusing, the laser power stabilizer and the auto aligning techniques. These technologies are already used commercially. However operation and control integrated system for 3-D direct patterning are not yet developed. The objective of this paper is to introduce laser direct structuring and develop the operating and integration system. Also we implemented new application of laser direct structuring.

• Smart Structures and Systems
• /
• v.14 no.2
• /
• pp.71-83
• /
• 2014

The purpose of this paper is to investigate the flexible structure of parabolic shell using photostrictive actuators. The analysis is made to know its dynamic behavior and light-induced control forces for coupled parabolic shell. The effects of an actuator location as well as membrane and bending components under the control action have been analyzed considering the approximate spherical model. The parabolic membrane shell accuracy is being mathematically approximated and validated comparing the light induced control forces using approximate equivalent spherical shell model. The parabolic shell with kapton smart material and photostrictive actuators has been used to formulate the governing equation in the transverse direction. The Kirchhoff-Love assumptions are used to obtain the governing equation of shell with actuator. The mechanical membrane forces and bending moments for parabolic thin shell with actuator is used to analyze the dynamic effect. The results show that membrane control action is much more significant than bending control action. Photostrictive actuators oriented along circumferential direction (actuator-2) can give better control effect than actuators placed along longitudinal direction (actuator-1). The slight difference is observed between spherical and parabolic shell for a surface with focal length to the diameter ratio of 1.00 or more than unity. Space applications often have the shape of parabolical shells or shell of revolution, due to their required focusing, aiming, or reflecting performance. The present approach is focused that photostrictive actuators can effectively control the vibration of parabolical membrane shell. Also, the actuator's location plays an important role in defining the control force.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.337-340
• /
• 2004

Stabilizing systems with Gyroscope are extensively used in various tracking devices for attaining the system's objective. Because of putting performance first in importance of system and focusing on specification of parts, designers are sometimes passing over the dynamic characteristics of system in vibrating condition. In this paper, we were dealing with unstable stabilizing control due to coincidence of stabilization platform natural frequency and that of Gyroscope used for sensing rate. For solving this problem, statics and dynamic test of silicon rubber with 3 different hardness were performed and similar stabilizing system was adopted to prove reasonability of rubber choice and static pre-strain.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.1
• /
• pp.67-74
• /
• 2008

A decrease in the ability to maintain static and dynamic balance after stroke could be related to the inability to select reliable sensory information in producing relative motor action needed to maintain postural stability. The purpose of this study was to compare the effects of two different types of surface conditions on the balancing ability of subjects with stroke. Eighteen hemiparetic subjects were assigned to an experimental and control group participating in a six－week rehabilitative therapeutic exercise program focusing on balance and mobility. Exercises were performed 3 to 5 times per week in a stable surface condition by the control group, and in an unstable surface condition by the experimental group. Pre－ and post test assessments involved the measurement of the static balance and dynamic balance, respectively by 7－item Berg Balance Scale－3P and by Pro－3 Balance System. Results showed that under the unstable surface condition, static balance in the experimental group showed more improvement than that of the control group.(Statistically, not very significant.) All the aspects of dynamic balance and mediolateral sway(balance) improved significantly than those of the control group. However, there were no significant differences between two groups. Overall, it can be concluded that under the unstable surface condition, the rehabilitative therapeutic exercise programs are effective in improving the dynamic balance of stroke subjects. The results suggest that the adaptation of the unstable surface in the rehabilitative therapeutic exercises could be effective for the patients with hemiplegia in balance. Further studies are needed to confirm the effectiveness of the unstable surface on improving balance and postural stability of hemiplegics.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.773-779
• /
• 2015

The laser Powder Bed Fusion (PBF) system is currently recognized as a leading process. Due to the various materials employed such as thermoplastic, metal and ceramic composite powder, the application's use extends to machinery, automobiles, and medical devices. The PBF system's surface quality of prototypes and processing time are significantly affected by several parameters such as laser power, laser beam size, heat temperature and laminate thickness. In order to develop a more elaborate and rapid system, this study developed a new PBF system and sintering process. It contains a 3-axis dynamic focusing scanner system that maintains a uniform laser beam size throughout the system unlike the $f{\theta}$ lens. In this study, experiments were performed to evaluate the effects of various laser scanning parameters and fabricating parameters on the fusion process, in addition to fabricating various 3D objects using a PA-12 starting material.