• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.6 s.40
• /
• pp.55-66
• /
• 2004

Recently, many high-rise apartment buildings using the box system, composed of only reinforced concrete walls and slabs, have been constructed. In residential buildings such as apartments, vibrations occur from various sources and these vibrations transfer to neighboring residential units through walls and slabs. It is necessary to use a refined finite element model for an accurate vibration analysis of shear wall building structures. But it would take significant amount of computational time and memory if the entire building structure were subdivided into a finer mesh. Therefore, an efficient analytical method, which has only translational DOFs perpendicular to walls or slabs by the matrix condensation technique, is proposed in this study to obtain accurate results in significantly reduced computational time. If all of the DOFs except those perpendicular to walls or slabs in the shear wall structure eliminated using the matrix condensation technique at a time, the computational time for the matrix condensation would be significant. Thus, the modeling technique using super elements and substructuring technique is proposed to reduce the computational time for the matrix condensation. Dynamic analysis of 3-story and 5-story shear wall example structures were performed to verify the efficiency and accuracy of the proposed method. It was confirmed that the proposed method can provide the results with outstanding accuracy requiring significantly reduced computational time and memory.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.389-395
• /
• 2009

To develop the carrier of hydrophobic antifungal agents based on low molecular weight water-soluble chitosan (LMWSC), LMWSC was chemically modified with deoxycholic acid (DA) which is one of the bile acid as a hydrophobic group. The nanoparticles (WSCDA) using DA conjugated LMWSC were characterized using dynamic light scattering (DLS) and transmittance electron microscope (TEM). The particle size of WSCDA ranged from 250 to 350 nm and increased with the number of DA substitution. The loaded itraconazole as an antifungal agent WSCDA nanoparticles (WSCDA-ITCN) were prepared by solvent evaporation method. The drug content and the loading efficiency were investigated approximately $9{\sim}10%$ and $61{\sim}68%$ by UV spectrophotometer, respectively. The release of drug from nanoparticles was slow and showed sustained release characteristics. Based on the results of release study that the higher DA contents in WSCDA, the slower the releasing rate, the WSCDA-ITCN could be used as an excellent antifungal agent.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.5
• /
• pp.847-857
• /
• 2020

As IoT equipment is commercialized, Bluetooth or wireless networks will be built into general living devices such as IP cameras, door locks, cars and TVs. Security for IoT equipment is becoming more important because IoT equipment shares a lot of information through the network and collects personal information and operates the system. In addition, web-based attacks and application attacks currently account for a significant portion of cyber threats, and security experts are analyzing the vulnerabilities of cyber attacks through manual analysis to secure them. However, since it is virtually impossible to analyze vulnerabilities with only manual analysis, researchers studying system security are currently working on automated vulnerability detection systems, and Firm-AFL, published recently in USENIX, proposed a system by conducting a study on fuzzing processing speed and efficiency using a coverage-based fuzzer. However, the existing tools were focused on the fuzzing processing speed of the firmware, and as a result, they did not find any vulnerability in various paths. In this paper, we propose IoTFirmFuzz, which finds more paths, resolves constraints, and discovers more crashes by strengthening the mutation process to find vulnerabilities in various paths not found in existing tools.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.2
• /
• pp.11-24
• /
• 2004

The purpose of this study is to present data on the human activities responding to the physical environment of ‘Ulsan’s Grand Parks by evaluating user behavior and activity, visiting motivations, and user satisfaction. This study was conducted using multi-methods such as interviews and questionnaires surveys. The main findings of this study can be summarized in six parts as follows: \circled1 Behavior patterns showed that the users visited the park left within 30 minutes and the frequency of visits was 1 or 2 times per week. They spent their time mostly on ‘walking’ and ‘picnicking’. The users visited regardless of the seasons or the day of the week. \circled2 The priorities for improvements were analyzed as follows: the users expressed their demands for ‘shadowing facilities’ like shelters and pergolas because they used these facilities frequently. Also, the users would like an ‘event program’, ‘sign system’ and ‘guide program’. \circled3 Analysis of the the user’s perception of the park showed that they perceive the park as ‘representative source of the landscape and open space in Ulsan and place for making contact with nature. \circled4 In examining the visiting motivations of the users of Ulsan Grand Park, it was revealed that people use the park for ‘time with family and friends’, ‘to escape from city life’, ‘to relieve fatigue. As a result of factor analysis, 4 factors were identified such as ‘physical motive(MF1)’, ‘exploratory motive(MF2)’, ‘social motive(MF3)’ and ‘emotional motive(MF4). \circled5 Park users’ evaluation for park facilities showed that people are satisfied with most of the facilities and especially, they have high level of satisfaction for ‘footpaths’, ‘squares’ and ‘picnicspace’. The evaluation of the park user’s of activity reveals that they are content with nearly all the variables. Especially, they have high level of satisfaction for the variables of ‘convenience for dynamic activities’, ‘making of a beautiful atmosphere, ‘accessibility from the outside’ and, ‘convenience in group activitie. Factor analysis of the park user’s of activity revealed 5 factors such as ‘convenience and interest factor (AF1)’, ‘park maintenance, management and use program(AF2)’, ‘visual beauty(AF3)’, ‘safety and accessibility(AF4)’ and ‘crowding(AF5)’. \circled6 Regression analysis was employed to get the predictor factors of overall satisfaction with a result of 60.0%($R^2$). The variance was explained as ‘quality of the picnic space’, ‘convenience and interest factor while using the park’, ‘park program for maintain and management in the park’, ‘visually beauty while using the park’, ‘safety and accessibility of the parks’, ‘quality of the pond’, ‘crowding’, ‘quality of the square’.

• Environmental and Resource Economics Review
• /
• v.27 no.3
• /
• pp.495-520
• /
• 2018

Because of structural changes in the international oil market and the economy, it is widely recognized that the impact of oil shocks on the economy has weaken since the mid-1980s. This study tries to examine the validity of the recent perception about the relationship between oils shocks and the economy, estimating the time-varying effects of oil shocks on the Korean economy. The results show that the dynamic effects of oil shocks normalized to a one standard deviation has been relatively constant, in contrast to the recent perception and a number of existing studies. In addition, because the shape of impulse response functions at each point in time spanning from 1984:II to 2017:IV has not been changed significantly, it seems that the propagation mechanism of oil shocks also has not been substantially altered. These findings indicate that even though structural changes of the economy, such as the reduction in the share of oil consumption and the spread of high-efficiency energy technologies, have been rapidly progressed, it is not still enough to offset the negative effects of oil shocks. Rather, it seems that the recent perception about the shrinking effects of oil shocks is mainly due to the assumptions that do not reflect changes in the size of oil shocks. In particular, this problem appears more pronounced in the case of the typical a one standard deviation increase oil shock under homoskedasticity assumption, which is widely adopted in the most VAR analyses. Therefore, in estimating the effects of oil shocks on the economy, it is important to specify the correct model and normalization method, to reflect changes in the size of oil shocks.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.70-80
• /
• 2000

Princeton Ocean Model (POM) is modified to construct a three-dimensional, semi-implicit hydro¬dynamic model with a wetting-and-drying scheme. The model employs semi-implicit treatment of the barotropic pressure gradient terms and the vertical mixing terms in the momentum equations, and the velocity divergence term in the vertically-integrated continuity equation. Such treatment removes the external mode and thus the mode splitting scheme in POM, allowing the semi-implicit model to use a larger time step. Applied to hypothetical systems, both the semi-implicit model and POM give nearly the same results. The semi-implicit model, however, runs approximately 4.4 times faster than POM showing its improved computational efficiency. Applied to a hypothetical system with intertidal flats, POM employing the mode splitting scheme produces noises at the intertidal flats, that propagate into the main channel resulting in unstable current velocities. Despite its larger time step, the semi-implicit model gives stable current velocities both at the intertidal flats and main channel. The semi-implicit model when applied to Kyeonggi Bay gives a good reproduction of the observed tides and tidal currents throughout the modeling domain, demonstrating its prototype applicability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.112-121
• /
• 2020

In suspension bridges, hanger cables are the main load-supporting members. The tension of the hanger cables of a suspension bridge is a very important parameter for assessing the integrity and safety of the bridge. In general, indirect methods are used to measure the tension of the hanger cables of a suspension bridge in traffic use. A representative indirect method is the vibration method, which extracts modal frequencies from the cables' responses and then measures the cable tension using the cables' geometric conditions and the modal frequencies. In this study, the image processing technique is applied to facilitate the estimation of the dynamic responses of the cables using the image signal, for which a portable digital camcorder was used due to its convenience and cost-efficiency. Ambient vibration tests were conducted on a suspension bridge in traffic use to verify the validity of the back analysis method, which can estimate the tension of remote hanger cables using the modal frequencies as a parameter. In addition, the tension estimated through back analysis method, which was conducted to minimize the difference between the modal frequencies calculated using finite element analysis of the hanger cables and the measured modal frequencies, was compared with that measured using the vibration method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4068-4074
• /
• 2011

The purpose of this study was to examine the usefulness of MR Breast perfusion image and time-signal intensity curve in patients diagnosed with breast cancer. We selected on 20 patients who were histologically diagnosed to have invasive ductal carcinoma (IDC) from March 2009 to December 2010. First, the Breast perfusion mapping image was reconstructed after obtaining the dynamic contrast enhancement image. The reconstructed image measured the slope, maximal relative enhancement, and time to peak on the detail including the lesion region, normal region, back ground region after obtaining the time-signal intensity curve. The lesion region and normal and slope of the back ground part were measured with the quantitive analytical method about the research and the average was compared and was analyze. In the qualitative analysis, the signal strength of each pixel was analyze with the macroscopic and being high it was low, the medium (2) performed the division of (a) by the three-point standard and the average was measured. The findings from the quantitative image analysis are the following: In the lesion region, the slope and maximal relative enhancement were the highestest among and the time to peak was the highestest in the back ground region. In the qualitative analysis, the breast perfusion image showed a diagnostic efficiency.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.10
• /
• pp.723-730
• /
• 2013

This paper presents the design of an arm gesture recognition system using Kinect sensor. A variety of methods have been proposed for gesture recognition, ranging from the use of Dynamic Time Warping(DTW) to Hidden Markov Models(HMM). Our system learns a unique HMM corresponding to each arm gesture from a set of sequential skeleton data. Whenever the same gesture is performed, the trajectory of each joint captured by Kinect sensor may much differ from the previous, depending on the length and/or the orientation of the subject's arm. In order to obtain the robust performance independent of these conditions, the proposed system executes the feature transformation, in which the feature vectors of joint positions are transformed into those of angles between joints. To improve the computational efficiency for learning and using HMMs, our system also performs the k-means clustering to get one-dimensional integer sequences as inputs for discrete HMMs from high-dimensional real-number observation vectors. The dimension reduction and discretization can help our system use HMMs efficiently to recognize gestures in real-time environments. Finally, we demonstrate the recognition performance of our system through some experiments using two different datasets.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2014

In this paper, we made a new polycationic polymeric liposome composed of low molecular weight polyethylenimine (PEI) and 10,12-pentacosadiynoic acid (PCDA). PCDA liposome was prepared by ultraviolet irradiation. PEI was further conjugated on the surface of the polymerized PCDA liposome using coupling reagents to make PCDA-PEI. The blue-to-red transition of PCDA liposome was observed during the coupling reaction. The size distribution of liposome and complexes with plasmid DNA was measured by dynamic light scattering (DLS). The complex formation was also identified by agarose gel electrophoresis and PicoGreen reagent assay. We confirmed the complex formation of the polymeric liposome with DNA and then performed transfection and cytotoxicity assay in HEK 293 and HeLa cells. As a result, PCDA-PEI showed significant gene transfection efficiency and low cytotoxicity. This study shows that PEI-conjugated PCDA liposome could be an efficient gene or drug delivery carrier.