• ETRI Journal
• /
• v.43 no.3
• /
• pp.471-482
• /
• 2021

Several code-division multiple access (CDMA)-based interconnect schemes have been recently proposed as alternatives to the conventional time-division multiplexing bus in multicore systems-on-chip. CDMA systems with a dynamic assignment of spreading codewords are particularly attractive because of their potential for higher bandwidth efficiency compared with the systems in which the codewords are statically assigned to processing elements. In this paper, we propose a novel distributed arbitration scheme for dynamic CDMA-bus-based systems, which solves the complexity and scalability issues associated with commonly used centralized arbitration schemes. The proposed arbitration unit is decomposed into multiple simple arbitration elements, which are connected in a ring. The arbitration ring implements a token-passing algorithm, which both resolves destination conflicts and assigns the codewords to processing elements. Simulation results show that the throughput reduction in an optimally configured dynamic CDMA bus due to arbitration-related overheads does not exceed 5%.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.44-50
• /
• 2010

Structural vibration is a significant problem in many multi-part or multi-component assemblies. In aircraft industry, structures are composed of various fasteners, such as bolts, snap, hinge, weld or other fastener or connector (collectively "fasteners"). Due to these, prediction and design involving dynamic characteristics is quite complicated. However, the current state of the art does not provide an analytical tool to effectively predict structure's dynamic characteristics, because consideration of structural uncertainties (i.e. material properties, geometric tolerance, dimensional tolerance, environment and so on) is difficult and very small fasteners in the structure cause a huge amount of analysis time to predict dynamic characteristics using the FEM (finite element method). In this study, to resolve the current state of the art, a new approach is proposed using the FEM and probabilistic analysis. Firstly, equivalent elements are developed using simple element (e.g. bar, beam, mass) to replace fasteners' finite element model. Developed equivalent elements enable to explain static behavior and dynamic behavior of the structure. Secondly, probabilistic analysis is applied to evaluate the PDF (probability density function) of dynamic characteristics due to tolerance, material properties and so on. MCS (Monte-Carlo simulation) is employed for this. Proposed methodology offers efficiency of dynamic analysis and reality of the field as well. Simple plates joined by fasteners are taken as an example to illustrate the proposed method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.930-935
• /
• 2005

In order to synthesis of the materials and modulus for floor impact sound reduction, we investigated effect on dynamic elastic modulus of floor impact sound reduction materials and module made by inorganic porous materials, EVA chips and so on. We find correlation property between dynamic elastic modulus and light-weight impact noise. And we measured the dynamic elastic modulus of materials and module for floor impact sound reduction. And we predicted reduction efficiency on floor Impact Noise of those. The dynamic elastic modulus is reduced by increase of filler contents and filler species. When the materials for floor impact sound reduction is consisted of l5wt% EVA Chip and l5wt% inorganic porous materials, its dynamic elastic material is the lowest. And when the module is consisted of PE (upper side), PS embossing board(lower side) and the materials for floor impact sound reduction(middle), its dynamic elastic material is the lowest.

• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.333-346
• /
• 2019

Foam ceramic materials contribute to the explosion effect weakening on concrete structures, due to the corresponding excellent energy absorption ability. The blast resistance of concrete members could be improved through steel-foam ceramics as protective cladding layers. An approach for the modeling of dynamic response of steel-foam ceramic protected reinforced concrete (Steel-FC-RC) slabs under blast loading was presented with the LS-DYNA software. The orthogonal analysis (five factors with five levels) under three degrees of blast loads was conducted. The influence rankings and trend laws were further analyzed. The dynamic displacement of the slab bottom was significantly reduced by increasing the thickness of steel plate, foam ceramic and RC slab, while the displacement decreased slightly as the steel yield strength and the compressive strength of concrete increased. However, the optimized efficiency of blast resistance decreases with factors increase to higher level. Moreover, an efficient design method was reported based on the orthogonal analysis.

• Journal of IKEEE
• /
• v.12 no.3
• /
• pp.176-183
• /
• 2008

The high efficiency power management IC(PMIC) with DTMOS(Dynamic Threshold voltage MOSFET) switching device is proposed in this paper. PMIC is controlled with PWM control method in order to have high power efficiency at high current level. DTMOS with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuits consist of a saw-tooth generator, a band-gap reference circuit, an error amplifier and a comparator circuit as a block. The Saw-tooth generator is made to have 1.2 MHz oscillation frequency and full range of output swing from ground to supply voltage(VDD:3.3V). The comparator is designed with two stage OP amplifier. And the error amplifier has 70dB DC gain and $64^{\circ}$ phase margin. DC-DC converter, based on Voltage-mode PWM control circuits and low on-resistance switching device, achieved the high efficiency near 95% at 100mA output current. And DC-DC converter is designed with LDO in stand-by mode which fewer than 1mA for high efficiency.

• Journal of Digital Convergence
• /
• v.18 no.2
• /
• pp.235-247
• /
• 2020

The Mutual Financial Cooperatives(MFCs) in Korea need to make efforts to increase efficiency and productivity in order to secure stable and sustainable growth and competitiveness. Therefore, this study analyzes the efficiency and productivity of MFCs from 2012 to 2018 and suggests some implications. The methodology employed is a Dynamic-Network Slacks-Based Measure(DNSBM) Model. The findings from an empirical study include that first, on average efficiency scores of the institutions, NH(0.225) showed the highest overall efficiency, and followed by SH(0.128) and MG(0.126). After 2015, most of the MFCs' efficiency scores had risen until to 2018. Second, in divisional analysis, the inefficiency in creating the high profitability-stage had been greater than establishing-funds-stage. Third, in projection analysis of Division 2, the inefficiency of the output factors such as interest income and operating income was severe. Fourth, the results from the Malmquist Productivity Index analysis of Division 1 of the fist-stage illustrate that all three MFCs showed minus catch-up effects. Also, a soundness from reducing bad loans and expansion of loans in combination with generating various ways of creating profits besides the interest income is urgently needed for Korean MFCs.

• Korea Journal of Hospital Management
• /
• v.15 no.1
• /
• pp.27-48
• /
• 2010

The purpose of this paper is to analyze the efficiency change and its determinants of the regional public hospitals. We utilize 34 regional public hospital's panel data for 6 years from 2003 to 2008. We use DEA(Data Envelopment Analysis)-CCR, BCC model, DEA/Window model, and DEA Profiling. The empirical results show the following findings. First, technical efficiency shows that approximately 3.6% of inefficiency exists on the regional public hospitals and it reveals that the cause for technical inefficiency is due to scale inefficiency. Second, DEA/Window results show that the stable dissimilarity by standard deviation, LDP of CCR. Third, the results of partial efficiency by DEA Profiling show that increase efficiency depends on the number of beds, doctors, and nurses.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.3
• /
• pp.169-182
• /
• 2015

When simulating the dynamic behaviour of a hydro power plant, it is essential to have a good representation of the turbine behaviour. The pressure transients in the system occurs because the flow changes, which the turbine defines. The flow through the turbine is a function of the pressure, the speed of rotation and the wicket gate opening and is, most often described in a performance diagram or Hill diagram. In the Hill diagram, the efficiency is drawn like contour lines, hence the name. A turbines Hill diagram is obtained by performance tests on scaled model in a laboratory. However, system dynamic simulations have to be performed in the early stage of a project, before the turbine manufacturer has been chosen and the Hill diagram is known. Therefore one have to rely on diagrams for a turbine with similar speed number. The Hill diagram is drawn through measured points, so for using the diagram in a simulation program, one have to iterate in the diagram based on curve fitting of the measured points. This paper describes an alternative method. By means of the Euler turbine equation, it is possible to set up two differential equations which represents the turbine performance with good enough accuracy for the dynamic simulations. The only input is the turbine's main geometry, the runner blade in- and outlet angle and the guide vane angle at best efficiency point of operation (BEP). In the paper, simulated turbine characteristics for a high head Francis turbine, and for a reversible pump turbine are compared with laboratory measured characteristics.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.963-968
• /
• 2007

In this paper introduce Standard 3D object(Bounding-Volume). In 3D game very efficient control algorithm Using collision detection which controls the convenient of a game based on Standard 3D object specially collision-detection. This algorithm is designed LOD(Level-of-Detail) using Dynamic-Hierarchies of collision detection efficiency improvement in 3D object.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.8
• /
• pp.799-803
• /
• 2010

Recently, there is a rising interest on studying bio-inspired robotic fish because of real fish's great maneuverability and high energy efficiency. However, the researches about the robotic fish have not been done so much and there are still lots of problems to use them in the real environment such as in the river. This paper describes a bio-inspired robotic fish 'Ichthus' which is developed in KITECH and has 3 DOF propulsive mechanism. We develop the dynamic motion equation of 'Ichthus' in the underwater environment and analyze response characteristics of 'Ichthus' according to the input parameters of tail fin's amplitude and oscillation frequency. Then we propose control parameters at the various velocities. These parameters are useful to increase energy efficiency and it can be used when the fish robot moves in the real environment, for example, we can propose proper amplitude and oscillation frequency when the fish robot passes through the narrow space between obstacles.