• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.432-438
• /
• 2019

In the study of nuclear structure, the fast timing technique can be used to measure the lifetime of excited states. In the paper, we have developed a new fast timing system, which is made up of two $LaBr_3:Ce$ detectors and a set of waveform sampling system. The sampling system based on domino ring sampler version 4 chip (DRS4) can digitize and store the waveform information of detector signal, with a smaller volume and higher timing accuracy, and the waveform data are performed by means of digital waveform analysis methods. The coincidence time resolution of the fast timing system for two annihilation 511 keV ${\gamma}$ photon is 200ps (FWHM), the energy resolution is 3.5%@511 keV, and the energy linear response in the large dynamic range is perfect. Meanwhile, to verify the fast timing performance of the system, the $^{152}Gd-2_1^+$ state form ${\beta}^+$ decay of $^{152}Eu$ source is measured. The measured lifetime is $45.3({\pm}5.0)ps$, very close to the value of the National Nuclear Data Center (NNDC: $46.2({\pm}3.9)ps$). The experimental results indicate that the fast timing system is capable of measuring the lifetime of dozens of ps. Therefore, the system can be widely used in the research of the fast timing technology.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.4
• /
• pp.13-21
• /
• 2021

PURPOSE: This study examined the effects of action observational training with acoustic stimulation (AOTA) on the balance and gait ability in stroke patients. METHODS: Forty-five chronic stroke patients were divided into three groups. The AOTA group (n = 15) received training via a video that showed a normal gait with the sound of footsteps. The action observation training (AOT) group (n = 15) received AOT without acoustic stimulation. The control group (n = 15) received physical training. Each intervention was applied once per day, three times per week for six weeks. The participants in the AOTA and AOT groups had five minutes of AOT. The participants in the all group had 20 minutes of physical training. All participants were measured using the Berg Balance Scale, the Timed Up and Go Test, the Functional Reaching Test, 10 Meter Walk Test, six Minute Walk Test, and Dynamic Gait Index. The collected data were analyzed using SPSS version 20.0 for Windows. The between- and within-group comparisons were analyzed using the one-way analysis of variance (ANOVA) test and a paired t-test, respectively. For all statistical analyses, the significance level was set to .05. RESULTS: The one-way ANOVA test identified significant differences among the measurement results of the three groups (p < .05). Post hoc analyses indicated the AOTA group to undergo more significant balance and gait changes than the control group (p < .05). CONCLUSION: The gait and balance abilities could be improved effectively for patients with stroke when action observation training and acoustic stimulation were applied simultaneously.

• Geomechanics and Engineering
• /
• v.28 no.5
• /
• pp.521-529
• /
• 2022

This research work deals with the development of air pluviation method for preparing uniform sand specimens for conducting large scale laboratory testing. Simulating real field conditions and to get reliable results, air pluviation method is highly desirable. This paper presents a special technique called air pluviation or sand raining technique for achieving uniform relative density. The apparatus is accompanied by a hopper, shutters with different orifice sizes and numbers and set of sieves. Before using this apparatus, calibration curves are drawn for relative density against different height of fall (H) and shutter sizes. From these calibration curves, corresponding to the desired relative density of 60%, the shutter size of 13mm and height of fall of 457.2 mm, are selected and maintained throughout the pluviation process. The density obtained from the mobile pluviator is then verified using the Dynamic Cone Penetrometer (DCP) test where the soil is poured in the box using defined shutter size and fall height. The results obtained from the DCP test are averaged as 60±0.5 which was desirable. The mobile pluviator used in this research is also capable of obtaining relative densities up to 90%. The instrument is validated using experimental and numerical approach. In numerical study, Plaxis 3D software is used in which the soil mass is defined by 10-Node tetrahedral elements and 6-Node plate is used to simulate plate behavior in the validation phase. The results obtained from numerical approach were compared with that of experimental one which showed very close correlation.

• Korean Journal of Social Welfare Studies
• /
• v.40 no.1
• /
• pp.115-138
• /
• 2009

The primary focus of this study is to examine the characteristics of the asset poor and to empirically investigate those factors affecting the likelihood of the asset poor's poverty exit and entry. The 2nd wave through 8th wave data from KLIPS were used for analysis. The asset poverty lined of 50% of the household net asset was set up so that households below 50% are classified as the asset poor. The characteristics of the asset poor were examined in a static manner by analyzing only the 8th wave KLIPS data. To investigate those factors affecting the likelihood of asset poor's poverty transferal with a dynamic perspective, the authors employed two survival analysis methods, the life table analysis and the Time-dependent Cox regression analysis. Based on the findings, some recommendations were made for future policy efforts to support the asset poor and for the current poverty policies as well. In specific, if the 'Individual Development Account' is to be initiated in the future, it would be essential to build a systematic model to utilize accumulated asset by enhancing job competencies and ability to gain a decent job.

• Journal of English Language & Literature
• /
• v.55 no.4
• /
• pp.661-692
• /
• 2009

From the Darwinian perspective, all the human behaviors and thoughts are operated by "the selfish gene," the term coined by Richard Dawkins, which has long been evolving to survive by utilizing the limited quality and quantity of resources. And an organism which fails to regenerate by creating its "replicator" is doomed to extinction, for gene combinations which help an organism to survive and reproduce tend to also improve the gene's own chances of being passed on through generations. Dawkins also coins the term "meme" for a unit of human cultural evolution analogous to the gene, suggesting that such selfish replication may also be the principle for human culture. Ian McEwan is not only a controversial but more importantly influential writer in the 21st century academic world. His 1997 book Enduring Love is not exceptional in that it draws both literary and scientific attention. Intentionally set up with the dynamic conflict between the two cultures, namely art and science, the book explores the way in which the state of the modern minds is misinterpreted and estranged by each other. In this novel, the three main protagonists, Joe, Clarissa, and Jed, each representing the very important three elements of human civilization-cognition/science, emotion/art, and faith/religion-meet an unexpected peril of life. The author of the novel employs the narrative of evolutionary science-in particular the narratives of gene and meme-to provoke the question of the two cultures famously addressed by Snow in the mid 20th century and the further discussions followed by the later Darwinian scholars such as Richard Dawkins. In this paper I aim to illustrate the way in which the author develops the idea of gene science and literature and how he proceeds to provide a sophisticated bridge between the two cultures and induce a kind of consilience by the recurrent name of love in the story of Enduring Love.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.101-104
• /
• 2010

Purpose: Raynaud scan is divided to flow, blood pool and local-delay image. Usually, we evaluate comparison through blood pool and local-delay image. We will evaluate about usability when comparative observe blood image and local-delay image in Raynaud scan that used $^{201}Tl$ as making flow image to one sheet of images. Materials and Methods: We have selected 29 Raynaud phenomenon patients aged 14~68 years who visited department of vascular surgery between Feb. 2008 and Aug. 2009. An intravenous injection $^{201}Tl$ of 111 MBq (3 mCi) to opposite side diagonal line limbs above an internal auditing department. Equipment used Philips gamma camera forte A-Z, and collimator used LEHR. Matrix size set up to each $64{\times}64$, $128{\times}128$, $256{\times}256$ and zoom factor used to full field. Protocol of dynamic is 2 second to 155 frames. Blood pool and delay count to 300 second. We set up ROI by a foundation to data acquired in PEGASYS processing program. Each results were analyzed with the SPSS 12.0 statistical software. Results: Each averages of count ratio (Rt / Lt) to have been given at composite image, a blood pool image, delay images analyzed at Raynaud phenomenon patients is $1.25{\pm}0.39$, $1.20{\pm}0.33$, $1.11{\pm}0.17$. The sample analysis results of blood pool image and delay image contented itself with p<0.029. Also, there don't have been each difference, and blood pool image, delay image regarding composite image was able to know. Conclusion: We were able to give help for comparison to evaluate a blood pool image and a local delay image at the Raynaud scan which used $^{201}Tl$ while making a flow image to one sheet image. Identification to be visual too was possible. If you are proceeded a researcher that there was further depth, you are more appropriate for, and you may get useful information.

• Journal of KIISE:Software and Applications
• /
• v.30 no.1_2
• /
• pp.153-163
• /
• 2003

In this paper, we propose a new technique of image based rendering(IBR) for the pose transformation of a face by using only a frontal face image and its mesh without a three-dimensional model. To substitute the 3D geometric model, first, we make up a standard mesh set of a certain person for several face sides ; front. left, right, half-left and half-right sides. For the given person, we compose only the frontal mesh of the frontal face image to be transformed. The other mesh is automatically generated based on the standard mesh set. And then, the frontal face image is geometrically transformed to give different view by using Invertible Meshwarp Algorithm, which is improved to tolerate the overlap or inversion of neighbor vertexes in the mesh. The same warping algorithm is used to generate the opening or closing effect of both eyes and a mouth. To evaluate the transformation performance, we capture dynamic images from 10 persons rotating their heads horizontally. And we measure the location error of 14 main features between the corresponding original and transformed facial images. That is, the average difference is calculated between the distances from the center of both eyes to each feature point for the corresponding original and transformed images. As a result, the average error in feature location is about 7.0% of the distance from the center of both eyes to the center of a mouth.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.337-346
• /
• 2020

Traffic jam and congestion in urban areas has caused the need to improve the utility of underground space. In response, research on underground structures is increasingly being conducted. Notably, a double-deck tunnel is one of the most widely used of all those underground structures. This double-deck tunnel is separated by the middle slab into the upper and lower roadways. Both vehicle load and earthquake load cause the middle slab to exhibit dynamic behavior. Earthquake-related response characteristics, in particular, are highly complex and difficult to interpret in a theoretical context, and thus experimental research is required. The aim of the present study is to assess the stability of a double-deck tunnel's middle slab of the Collapse Prevention Level and Seismic Category 1 with regard to the presence of vibration-damping Rubber Bearings. In vibration table tests, the ratio of similitude was set to 1/4. Linings and vibrating platforms were fixed during scaled model tests to represent the integrated behavior of the ground and the applied models. In doing so, it was possible to minimize relative behavior. The standard TBM cross-section for the virtual double-deck tunnel was selected as a test subject. The level of ground motion exerted on the bedrock was set to 0.154 g (artificial seismic wave, Collapse Prevention Level and Seismic Category 1). A seismic wave with the maximum acceleration of 0.154 g was applied to the vibration table input (bedrock) to analyze resultant amplification in the models. As a result, the seismic stability of the middle slab was evaluated and analyzed with respect to the presence of vibration-damping rubber bearings. It was confirmed that the presence of vibration-damping rubber bearings improved its earthquake acceleration damping performance by up to 40%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1643-1651
• /
• 1999

Video-On-Demand (VOD) is expected to provide the user with interactive operations such as VCR functions. In particular, fast scan functions like “Fast Forward” of “Fast Backward” for a certain speedup playback are required. Since they require a significant amount of system resources, schemes to reduce bandwidth requirements for the network or disk are needed. In MPEG standard, Group-of-Pictures (GoP) is a random access unit which can be decoded independently. Since storing and transmitting a video stream based on GoP is efficient, it is practical to support fast scan functions based on GoP. In this paper, we present a dynamic transmission scheduling scheme to support fast scan functions with m-times normal playback rate for a stored video. The proposed scheme writes a transmission schedule whenever user requests a fast scan function. That is, the scheme constructs the data set to be smoothed by skipping GoPs according to a given speedup factor, and then writes the transmission schedule by applying a bandwidth smoothing. Finally, the scheme restarts the transmission of video data to a client according to the new schedule. The proposed scheme results in speeding up the playback rate by utilizing “GoP skipping”, and then reduces the computational overhead by applying a bandwidth smoothing based on GoP.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.596-602
• /
• 2020

Blending process of adhesive production has a cooling process to cool down the temperature of the solution which was heated up to 76 ℃ with a mineral insulated (MI) cable by 30 ℃ at room temperature. Using a MI cable in the adhesive production process makes the production inefficient because it takes about 10 h for the cooling process. If a jacketed vessel is used instead of the MI cable, it would shorten the cooling downtime without any additional cooling system by using cold water. However, there are various types of jacketed vessels, and thus the most suitable type should be found before set up. In this study, we designed the optimized jacketed vessel for the adhesive production process by calculating the cooling downtime, which impacts production efficiency, as a function of the jacket types using computational fluid dynamics. As a result, the cooling performance of the plain jacket was 32.7% superior to that of the half-pipe coil jacket with the same height. In addition, the plain jacket with 60% spiral baffle reduced the cooling downtime and operating time by 80.4% and 25.1%, respectively.