• Title/Summary/Keyword: Dynamic SET-UP

Search Result 348, Processing Time 0.025 seconds

Characteristics of Solar Wind Density Depletions During Solar Cycles 23 and 24

  • Park, Keunchan;Lee, Jeongwoo;Yi, Yu;Lee, Jaejin;Sohn, Jongdae
    • Journal of Astronomy and Space Sciences
    • /
    • v.34 no.2
    • /
    • pp.105-110
    • /
    • 2017
  • Solar wind density depletions are phenomena that solar wind density is rapidly decreased and keep the state. They are generally believed to be caused by the interplanetary (IP) shocks. However, there are other cases that are hardly associated with IP shocks. We set up a hypothesis for this phenomenon and analyze this study. We have collected the solar wind parameters such as density, speed and interplanetary magnetic field (IMF) data related to the solar wind density depletion events during the period from 1996 to 2013 that are obtained with the advanced composition explorer (ACE) and the Wind satellite. We also calculate two pressures (magnetic, dynamic) and analyze the relation with density depletion. As a result, we found total 53 events and the most these phenomena's sources caused by IP shock are interplanetary coronal mass ejection (ICME). We also found that solar wind density depletions are scarcely related with IP shock's parameters. The solar wind density is correlated with solar wind dynamic pressure within density depletion. However, the solar wind density has an little anti-correlation with IMF strength during all events of solar wind density depletion, regardless of the presence of IP shocks. Additionally, In 47 events of IP shocks, we find 6 events that show a feature of blast wave. The quantities of IP shocks are weaker than blast wave from the Sun, they are declined in a short time after increasing rapidly. We thus argue that IMF strength or dynamic pressure are an important factor in understanding the nature of solar wind density depletion. Since IMF strength and solar wind speed varies with solar cycle, we will also investigate the characteristics of solar wind density depletion events in different phases of solar cycle as an additional clue to their physical nature.

Effect of Experiencing Characteristics of Preparatory Business Starters on the Formation of Dynamics for Launching into the Society

  • Chung, Mi-Hye;Park, Key-Yoon;Moon, Young-Ae;Park, Chan-Mee;Park, Sun-Ui;Han, Suk-Hee
    • The International Journal of Costume Culture
    • /
    • v.13 no.2
    • /
    • pp.104-117
    • /
    • 2010
  • The purpose of this study is to find out the effect of on-the-job experiencing program on the formation of dynamics such as creativity, organizing, and clarity necessary for launching into the society through a cause-and-effect analysis to determine the priority of resources investments and improvements of educational courses. As a result, the selling experience and planned workshop were found to have effect on the creative dynamic that preparatory business starters must secure without fail. This means that e-Fashionn Lab(http://www.bc2d.com) which is an experiencing program, is fully accomplishing its initial objective set up at the time of the system design. In addition, the selling experience and the mini-home page experience were found to have effect on the formation of organizing dynamic of preparatory business starters. This shows that the system design to realize the database of personal friendships and personal information is being used fully as an educational practice instruments. Lastly, the selling experience and planned workshops were found to have effect on the formation of clarity dynamic of preparatory business starters as experiencing characteristic has effect on creativity. However, the community (work room) experience was found to have no effect on the formation of dynamics necessary for preparatory business starters to advance into the society at this study. This signifies that the system input resources should be pushed back in priority and that curriculums and system design should be concentrated on strengthening the selling experience and planned workshop in general.

  • PDF

Characterization of Dynamic Deformation Behavior of Al 7075-T6 at High Temperature by Using SHPB Technique (SHPB 기법을 사용한 고온에서의 Al 7075-T6 의 동적 변형 거동)

  • Lee, Ouk-Sub;Park, Jin-Su;Choi, Hye-Bin;Kim, Hong-Min
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.34 no.8
    • /
    • pp.981-987
    • /
    • 2010
  • The split Hopkinson pressure bar (SHPB) technique is extensively used to characterize material deformation behavior under high strain rate condition. In this study, the dynamic deformation behavior of aluminum 7075-T6 under a high strain rate and at a high temperature is investigated by using a modified SHPB set-up with the pulse shaper technique. The parameters used in the Johnson-Cook constitutive equation are determined by using the SHPB experimental results including the data on the effects of strain rate, temperature, strain hardening, and thermal softening of the material.

A Study on the Effective Method of Generating the Dynamic Web Documents in the Multi-user System (다중-사용자 시스템에서의 효과적인 동적 웹 문서 발생 방법에 관한 연구)

  • Lee Hyun-Chang;Lee Jong-Eon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.5B
    • /
    • pp.478-485
    • /
    • 2006
  • In this paper, we analyze the conditions of generating the dynamic Web documents in multi-user server and propose effective method for it. PSSI technique leads to replace the complex process of modifying a CGI source program by simply correcting the HTML Web document in the external file form. This technique has the strong points of CGI, flexibility and security of programming as well as those of SSI, easiness of modifying Web documents. Due to the characteristics of PSSI that Web source documents are in the form of external file, we show that with a single CGI program an individual user can design and modify his own Web documents in his directory. This means that PSSI technique has more advantage in managing the server than the CGI method which requires CGI program to be set up whenever that service is needed.

Design and Implementation of Dynamic Binding System among the Devices Located in Inside and Outside of Home Networks (홈 네트워크에서의 댁내외 기기들의 동적 바인딩 시스템 설계 및 구현)

  • Lee, Jae-Hyun;Kwon, Kyung-Hee
    • The Journal of the Korea Contents Association
    • /
    • v.6 no.12
    • /
    • pp.169-176
    • /
    • 2006
  • Since home network system is usually set up based on the built-in system inside home at the time of construction, it has a difficulty in being compatible with new devices after construction. In this paper, we propose DBS(Dynamic Binding System) that can make links effectively among the devices located in inside and outside of home networks. Implementation of the DBS is based on the ZigBee's binding in WPAN(Wireless Personal Area Network). For this research, we constructed the system consisting of home server that contains proxy server and location server, devices inside home in which tinyOS is embedded, and mobile device that is an emulator. The communication inside home is done by IEEE 802.15.4 protocol and the communication between servers and mobile devices outside home is done by TCP/IP protocol. Regardless of device's address format, the DBS facilitates a link among the devices located inside and outside of home networks. And, introducing a new device into home network can be recognized easily by exchanging messages between devices.

  • PDF

Walking Environment Survey for Development of Specification on Personal Mobility (PM) Device for Elderly (고령자용 개인교통수단 개발 사양 정의를 위한 보행환경 조사)

  • Kim, Youngmin;Kim, Jisoo;Moon, Byeongsup
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.16 no.6
    • /
    • pp.156-168
    • /
    • 2017
  • Personal mobility (PM) can increase the mobility of individual, so that the elderly can be set as the target group for using PM because of relatively low walking ability to normal. In this study, we design PM device for elderly that can be used safely in the walking environment such as sidewalk. There are various obstacles in the walking environment, so the device must have mechanical performance to overcome all of them. In this study, we survey the status and level of obstacle factors in walking environment to determine the dynamic performance of the PM device for elderly. We check up several guidelines about walking facilities to define obstacle points for the device, establish field survey methodologies, and conduct field survey for some specific road sections. Based on the survey results, we confirm the possible problems that could arise when the dynamic performance of the device is selected based on the facility-related criteria. We also define the performance requirements for the device based on the requirements for electric wheelchair.

The Effect of Corrective Exercise on Cobb's Angle, Static and Dynamic Foot Pressure of Patients With Kyphosis (교정운동 프로그램이 척추후만증 환자의 척추만곡 구조 및 족저압에 미치는 영향)

  • Moon, Hyung-Hoon;Jung, Suk-Yool;Park, Sang Seo;Kim, Bo Kyung;Park, Yun-Jin
    • Korean Journal of Applied Biomechanics
    • /
    • v.24 no.2
    • /
    • pp.103-109
    • /
    • 2014
  • The study aimed to examine the effect of a corrective exercise on Cobb's angle and static and dynamic foot pressure in patients with kyphosis. Patients with kyphosis participated in a 12 weeks of corrective exercise program. Participants were randomly assigned to a corrective exercise group (n=17) and a control group (n=17), and corrective exercise for 60 minutes are executed every 3 times a week. All data were analyzed by two-way repeated measured ANOVA. Statistical level was set up as a=.05. As a result, Cobb's angle had significantly effects according to time and groups. Anterior and posterior part of static foot pressure showed significant effects by time but not by groups. Whereas left and right part of static foot pressure showed no significant effects. And dynamic foot pressure showed significant effects by time but not by group also. In conclusion, it is approved that this exercise was helpful on abnormal posture arrangement and improvement of unbalanced muscle capability.

A Design of Narrative Structure for Documenting Environmental Conflicts : Case of Mi-ryang Transmission Towers Construction Conflicts (환경갈등의 기록화를 위한 내러티브 설계 밀양 송전탑 건설 갈등을 사례로)

  • Seol, Moon Won
    • The Korean Journal of Archival Studies
    • /
    • no.42
    • /
    • pp.287-326
    • /
    • 2014
  • Documenting environmental conflicts will be a priority target for documenting localities, because those conflicts are critical events that make intensive 'place experiences' of local residents. This study is to design a narrative structure for documenting conflicts in the process of Transmission Towers Construction in Miryang. This study begins with analysing the characteristics of environmental conflicts, and draws a conflicts documentation model including basic rules, narrative structure and development process. Basic rules are set up as mixed documentation of memory and evidence, application of 'frame', and dynamic description. Based on the rules, this study suggests a dynamic and open narrative framework adopting the metadata model of ISO 23081. This model is applied to documenting Transmission Towers Construction Conflicts in Mi-ryang. The full narrative and 'frame' of the conflicts are set after analysing development and issues of the conflicts, stakeholder, and properties of each conflict problem. Records descriptions are related to the context(each event occurred in the conflicting conditions, mandates, and stakeholder) descriptions to make multiple narratives in digital environments. Event description contains elements for articulating the 'frame' of each party of the conflict. The merits of this model are; i) to accumulate the adequate context information systematically by adopting dynamic narrative model, and ii) to acquire the new items and connect them to related items easily and consistently through multi-entity description. This documentation model of environmental conflicts may support to shape the collective memory of community, and to achieve good governance by managing conflicts in the process of locating non-preferred facilities with due regard to values and perceptions of residents and communities.

The Influence of Dynamic Capabilities on the Competitive Capabilities and Performance of Export Venture Firms in Korea (기업의 동태적 역량이 경쟁능력 및 기업성과에 미치는 영향)

  • Hwang, Kyung-Yun;Sung, Eul-Hyun;Cho, Dae-Woo
    • Management & Information Systems Review
    • /
    • v.37 no.1
    • /
    • pp.19-40
    • /
    • 2018
  • The purpose of this study is to analyze the effects of a firm's dynamic capabilities measured by sensing, seizing, transforming, coordinating, and learning capabilities on its competitive capabilities, such as product quality, process flexibility, delivery speed, and low cost. The relationship among dynamic capabilities, competitive capabilities, and export firm performance is set up as a research model based on empirical studies related to the existing dynamic capability perspective and competitive capabilities. To test this research model, this study collected 102 samples of data using a questionnaire survey on both manufacturing and exporting firms. The partial least squares method is used and the following results are derived from an empirical analysis. First, dynamic capabilities have a positive effect on competitive capabilities, such as product quality, process flexibility, delivery speed, and low cost. Second, product quality and process flexibility have a positive effect on export firm performance. Third, unlike previous research results, this study finds that the competitive capabilities of a firm in the areas of delivery speed and low cost do not significantly affect its performance. These findings provide meaningful implications for export venture firms that need to acquire and maintain competitive advantage in a rapidly changing environment.

The Effect of Bearing Capacity Increasement for Driven Pile in Silt (실트지반에 타입된 말뚝의 지지력 증가효과)

  • Yeo, Byung Chul;Oh, Se Wook;Bae, Woo Seok;Ahn, Byung Chul
    • Journal of the Korean GEO-environmental Society
    • /
    • v.4 no.3
    • /
    • pp.19-26
    • /
    • 2003
  • Recently, for the design of pile foundations on the soft ground condition, it is recognized that set-up effects are another important factor which influence the characteristics of bearing capacity of pile. In this paper, the thirteen dynamic pile loading tests were performed at the two different construction sites and the end of initial driving(EOID) were also performed and then restrike tests were performed after certain time lag. The H-pile, pipe pile, PHC pile are installed by driving into the loose silty soil and then restrike tests were performed. Nine days after pile driving, the bearing capacity of H and pipe pile were increased whereas there is not bearing capacity increasement with PHC pile. When the dense silty soil, the restrike test results showed that the bearing capacity of H and pipe pile increased up to 1.17 times. The 1-st and 2-nd restrike tests performed after 6 and 12 day, respectively. The results showed that the bearing capacity of PHC pile was decreased but the bearing capacity of piles were increased up to 1.38 times after 13 days with the third restrike test.

  • PDF