• Korean Journal of Radiology
• /
• v.23 no.2
• /
• pp.172-179
• /
• 2022

Objective: We aimed to evaluate the ostium of right coronary artery of anomalous origin from the left coronary sinus (AORL) with an interarterial course throughout the cardiac cycle on CT and analyze the clinical significance of the ostial findings. Materials and Methods: From January 2011 to December 2015, 68 patients (41 male, 57.3 ± 12.1 years) with AORL with an interarterial course and retrospective cardiac CT data were included. AORL was classified as high or low ostial location based on the pulmonary annulus in the diastolic and systolic phases on cardiac CT. In addition, the height, width, height/width ratio, area, and angle of the ostium were measured in both cardiac phases. After cardiac CT, patients were followed until December 31, 2020 for major adverse cardiac events (MACE). Clinical and CT characteristics associated with MACE were explored using Cox regression analysis. Results: During a median follow-up period of 2071 days (interquartile range, 1180.5-2747.3 days), 13 patients experienced MACE (19.1%, 13/68). Seven (10.3%, 7/68) had the ostial location change from high in the diastolic phase to low in the systolic phase. In the univariable analysis, younger age (hazard ratio [HR] = 0.918, p < 0.001), high ostial location (HR = 4.008, p = 0.036), larger height/width ratio (HR = 5.621, p = 0.049), and smaller ostial angle (HR = 0.846, p = 0.048) in the systolic phase were significant predictors of MACE. In multivariable cox regression analysis, younger age (adjusted HR = 0.917, p = 0.002) and high ostial location in the systolic phase (adjusted HR = 4.345, p = 0.026) were independent predictors of MACE. Conclusion: The ostial location of AORL with an interarterial course can change during the cardiac cycle, and high ostial location in the systolic phase was an independent predictor of MACE.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.3
• /
• pp.77-86
• /
• 2010

In this study, the model of the indirect wind suction waste sorting machine for characteristics of the screening of waste was studied using computational fluid dynamics and the drag coefficient for the model and the suction wind speed were obtained. The wind separator are developing by installing a cyclone air outlet to the suction blower impeller waste is selective in a way that does not pass the features and characteristics of the inlet pipe of the pressure loss and separation efficiency can have a significant impact on. Using Wind separator for selection of waste in the waste prior research on the aerodynamic properties are essential. For plastic cases, it is reasonable to take the drag coefficient between 0.8 and 1.0, and for cans, compression depending on whether the cans, the drag coefficient is in the range from 0.2 to 0.7. The separation efficiency of waste as change suction speed was the highest efficiency when the suction speed was 25~26 m/s. Shape of the inlet, depending on how the transfer pipe of the duct pressure loss occurs because the inlet velocity changes through the appropriate design standards to allow for continued research is needed.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.377-384
• /
• 2010

We perform a comparative study to investigate the properties of the new energetic chain extender (AzPD). A series of poly(glycidyl azide)/poly(tetramethylene oxide)-based energetic segmented polyurethane (GAP/PTMG ESPU) with different chain extender, which is 3-azidopropane-1,2-diol (AzPD), 1,4-butane diol (1,4-BD), or 1,5 pentane diol (1,5-PD), was synthesized by solution polymerization in dimethyl formamide (DMF) and their phase behaviors were investigated. The ESPUs were characterized with Fourier transform infrared-attenuated total reflection spectroscopy (ATR FT-IR), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The results of the ATR FT-IR analysis of the urethane carbonyl group region showed that the 'free' C=O fraction was higher in GAP/PTMG AzESPU (0.5) than GAP/PTMG BDESPU (0.44) and GAP/PTMG PDESPU (0.41) for 7 days samples after preparation and that it was similar in the range of 0.26~0.29 for three 60 days ESPU samples. DMA curves of the GAP/PTMG AzESPU for 7 days samples showed amorphous polymers, but GAP/PTMG BDESPU and GAP/PTMG PDESPU showed viscoelastic behaviors with rubbery plateau and the flow region. However, DMA curves of the GAP/PTMG AzESPU for 60 days samples showed viscoelastic behaviors with rubbery plateau and the flow region like GAP/PTMG PDESPU, but GAP/PTMG BDESPU did not show the flow region. From phase behaviors with ATR FT-IR, DSC and DMA analysis, GAP/PTMG AzESPU showed good phase-mixing between components. However, it represented viscoelastic behavior of TPE similar to GAP/PTMG PDESPM according to phase equilibrium progress with aging time.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.517-528
• /
• 2007

Domestic or international existing researches regarding rail damage factors are focused on laying, vehicle conditions, driving speed and driving habits and overlook characteristics of track structure (elasticity, maintenance etc). Also in ballast track, as there is no special lateral spring stiffness of track also called as ballast lateral resistance in concrete track, generally, existing study shows concrete track has 2 time shorter life cycle for rail replacement than ballast track due to abrasion. As a result of domestic concrete track design and operation performance review, concrete track elasticity is lower than track elasticity of ballast track resulting higher damage on rail and tracks. Generally, concrete track has advantage in track elasticity adjustment than ballast track and in case of Europe, in concrete track design, it is recommended to have same or higher performance range of vertical elastic stiffness of ballast track but domestically or internationally review on lateral spring stiffness of track is very minimal. Therefore, through analysis of service line track on site measurement and analysis on performance of maintenance, in this research, dynamic characteristic behaviors of commonly used ballast and concrete track are studied to infer elasticity of service line track and experimentally prove effects of track lateral spring stiffness that influence curved rail damage as well as correlation between track elasticity by track system and rail damage to propose importance of appropriate elastic stiffness level for concrete and ballast track.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.3
• /
• pp.143-156
• /
• 2015

In order to understand the dynamic characteristics of water column environments in the Western Pacific seamount area (approximately $150.2^{\circ}E$, $20^{\circ}N$), we investigated the water mass and the behavior of water column parameters such as dissolved oxygen, inorganic nutrients (N, P), and chlorophyll-a. Physico-chemical properties of water column were obtained by CTD system at the nine stations which were selected along the east-west and south-north direction around the seamount (OSM14-2) in October 2014. From the temperature-salinity diagram, the main water masses were separated into North Pacific Tropical Water and Thermocline Water in the surface layer, North Pacific Intermediate Water in the intermediate layer, and North Pacific Deep Water in the bottom layer, respectively. Oxygen minimum zone (OMZ, mean $O_2$ $73.26{\mu}M$), known as dysoxic condition ($O_2<90{\mu}M$), was distributed in the depth range of 700~1,200 m throughout the study area. Inorganic nutrients typified by nitrite + nitrate and phosphate showed the lowest concentration in the surface mixed layer and then gradually increased downward with representing the maximum concentration in the OMZ, with lower N:P ratio (13.7), indicating that the nitrogen is regarded as limiting factor for primary production. Vertical distribution of water column parameters along the east-west and south-north station line around the seamount showed the effect of bottom water inflowing at around 500 m deep in the western and southern region, and concentrations of water column parameters in the bottom layer (below 2,500 m deep) of the western and southern region were differently distributed comparing to those of the other side regions (eastern and northern). The value of Excess N calculated from Redfield ratio (N:P=16:1) represented the negative value throughout the study area, which indicated the nitrogen sink dominant environments, and relative higher value of Excess N observed in the bottom layer of western and southern region. These observations suggest that the topographic features of a seamount influence the circulation of bottom current and its effects play a significant role in determining the behavior of water column environmental parameters.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.652-659
• /
• 2015

The physical properties of wheat kernels were determined as a function of moisture content to optimize the design of equipment for post-harvest management. Several properties, including bulk density, dynamic repose angle, one thousand-kernel weight, specific gravity, length, width, thickness, and area of two wheat cultivars (Baekjjung: B and Jogyeong: J ), were studied in the moisture range from approximately 9% to 30% wet basis. As moisture increased, length increased linearly from 6.42 to 7.20 mm (B) and 8.71 to 9.15 mm (J), width increased from 2.90 to 3.49 mm (B) and 4.12 to 4.43 mm (J), thickness from 2.94 to 3.20 mm (B) and 3.29 to 3.63 mm (J), and area from 14.13 to $19.44mm^2$ (B) and 27.75 to $31.25mm^2$ (J). Additionally, the dynamic repose angle and one thousand-kernel weight increased linearly from $46.3^{\circ}$ to $54.0^{\circ}$ (B) and $46.3^{\circ}$ to $54.5^{\circ}$ (J) and from 32.26 to 41.51 g (B) and 45.30 to 63.07 g (J), respectively, as the moisture content increased. Based on the experimental measurements, only the bulk density and specific gravity decreased from 754.0 to $664.1kgm^{-3}$ (B) and 776.1 to $660.0kgm^{-3}$ (J) and from 1.2950 to 1.2265 (B) and 1.3379 to 1.2671 (J), respectively, as moisture content increased.

• Economic Analysis
• /
• v.26 no.1
• /
• pp.84-132
• /
• 2020

A central bank infers market expectations of future yields based on yield curves. The central bank needs to precisely understand the changes in market expectations of future yields in order to have a more effective monetary policy. This need explains why a range of models have attempted to produce yield curves and market expectations that are as accurate as possible. Alongside the development of bond markets, the interconnectedness between them and macroeconomic factors has deepened, and this has rendered understanding of what macroeconomic variables affect yield curves even more important. However, the existence of various theories about determinants of yields inevitably means that previous studies have applied different macroeconomics variables when estimating yield curves. This indicates model uncertainties and naturally poses a question: Which model better estimates yield curves? Put differently, which variables should be applied to better estimate yield curves? This study employs the Dynamic Nelson-Siegel Model and takes the Bayesian approach to variable selection in order to ensure precision in estimating yield curves and market expectations of future yields. Bayesian variable selection may be an effective estimation method because it is expected to alleviate problems arising from a priori selection of the key variables comprising a model, and because it is a comprehensive approach that efficiently reflects model uncertainties in estimations. A comparison of Bayesian variable selection with the models of previous studies finds that the question of which macroeconomic variables are applied to a model has considerable impact on market expectations of future yields. This shows that model uncertainties exert great influence on the resultant estimates, and that it is reasonable to reflect model uncertainties in the estimation. Those implications are underscored by the superior forecasting performance of Bayesian variable selection models over those models used in previous studies. Therefore, the use of a Bayesian variable selection model is advisable in estimating yield curves and market expectations of yield curves with greater exactitude in consideration of the impact of model uncertainties on the estimation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.5
• /
• pp.25-33
• /
• 2011

This work proposes a skinny-type 10b 50MS/s 0.13um CMOS three-step pipeline ADC for CIS applications. Analog circuits for CIS applications commonly employ a high supply voltage to acquire a sufficiently acceptable dynamic range, while digital circuits use a low supply voltage to minimize power consumption. The proposed ADC converts analog signals in a wide-swing range to low voltage-based digital data using both of the two supply voltages. An op-amp sharing technique employed in residue amplifiers properly controls currents depending on the amplification mode of each pipeline stage, optimizes the performance of op-amps, and improves the power efficiency. In three FLASH ADCs, the number of input stages are reduced in half by the interpolation technique while each comparator consists of only a latch with low kick-back noise based on pull-down switches to separate the input nodes and output nodes. Reference circuits achieve a required settling time only with on-chip low-power drivers and digital correction logic has two kinds of level shifter depending on signal-voltage levels to be processed. The prototype ADC in a 0.13um CMOS to support 0.35um thick-gate-oxide transistors demonstrates the measured DNL and INL within 0.42LSB and 1.19LSB, respectively. The ADC shows a maximum SNDR of 55.4dB and a maximum SFDR of 68.7dB at 50MS/s, respectively. The ADC with an active die area of 0.53$mm^2$ consumes 15.6mW at 50MS/s with an analog voltage of 2.0V and two digital voltages of 2.8V ($=D_H$) and 1.2V ($=D_L$).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.69-73
• /
• 2011

Unlike land fires, Fires on board a ship are not likely to be extinguished by skilled human resources using a variety of fire fighting equipments, but have to be brought under control on board a ship itself despite of difficult task. There are more cases of deaths from suffocation by smoke than from an increased temperature by heat in fires on board ships, because crew fail to secure a sufficient visibility range enough to escape from the scene of a fire or to leave the ship as early as possible. On the assumption that the height of ship's accommodation area increases from 2.0m to 2.3m comparable to the height of apartments on the ground in Korea, behaviors of fire smokes between the cases of 2.0m and 2.3m heights were compared and analyzed. Based on the blue print of the existing Training Ship "Hanbada", a new blueprint with the 30 cm height adjustment was additionally created. FDS (Fire Dynamic Simulator), which was created by the NIST in the United States and is the most widely distributed simulator for fires, was used to conduct a simulation and predict results. The results of simulation on the basis of temperature of $60^{\circ}C$ showed a safe evacuation period of time at the position 10m apart from the scene of a fire to increase by 55.8 seconds, when the height of ship's accommodation area increased from 2.0m to 2.3m. The results of simulation on the basis of visibility range of 6m showed the safe evacuation periods of time at the positions 10m, 20m and 30m apart from the scene of a fire to increase by 27.1 seconds, 109.2 seconds and 73.3 seconds, respectively, as the height of ship's accommodation area increased from 2.0m to 2.3m. This means that crew can escape more safely from a scene of fires on board when the height of ship's accommodation area is increased and equal to the height of living room in a building on land.

• Journal of Korean Academy of Nursing
• /
• v.18 no.2
• /
• pp.162-188
• /
• 1988

The purpose of this study is to guide the direction of the Korean nursing education to analysize ⑴ the philosophy and objectives ⑵ curriculum, and ⑶ educational environment. This analysis is based on the data from 50 nursing schools (14 4-year colleges and 35 3-year colleges) The survey was conducted from Dec. 1986 through Jan. 1987 by mail. 1) Educational philosophy and objectives 10 4-year colleges and 8 3-year college program have curricular philosoph. Most popular curricular philosophies are human beings, health, nursing, nursology, nursing education, nurses role in the present and in the future. 10 nursing schools mentioned that human being is the subject to interact with : environment physically, mentally and socially. 2 schools mentioned that health is the state of functioning well physically, mentally and socially. 13 schools mentioned that the nursing is the dynamic act to maintain and to promote the highest possible level of health. 4 schools mentioned that the nursology is an applied science. 4 schools mentioned that nursing education is the process to induce the behavioural changes based on the individual ability. There is different opinion about the nurses' role between 4-year college and 3-year college. In the responses from 4-year colleges they focus on the leadership in effective changes, self-regulating and self-determining responsibilities, applying the new technology, continuing education, and participation in research to further nursing knowledge. In the responses from 3-year colleges, they focus on the education in college, primary health care nursing, direct care provider and public health education. Among 50 respondents 40 schools have educational goals which can be divided into two categories. One is to establish the moral and the other is to develop the professionalism. 2) Curriculm The analsis of curriculum is only based on the data from the 4-year colleges because the most of 3-year colleges follow the curriculum guideline set by the Ministry of Education. a) Comparison of the credits in cultural subject and in nursing major. The average required credit for graduation is 154.6 and the median credit is the range of 140-149. The average credit of cultural subjects is 43.4. In detail, the average number of credit of required course and elective courses are 24.1 and 19.3 respectively. The average credit for major subject is 111.2. In detail, the average credit for required courses and electives course are 100.9 and 10.4 respectively. In 5 colleges, students are offered even on elective course b) Comparison of the credit by class. The average earned credits are as follows : 41.1 in freshman, 400 in sophormore 38.3 in junior and 32.4 in senior. Cultural subjects are studied in early phases. c) Comparison of the compulsory and elective cultural subject by institute. The range of credit is 7-43 in compulsory cultural subjects and there are lot of differences among institutions. While all respondents require liberal arts as compulsary subjects, few respondents lists social science, natural science and behavioral science as required subjects. Social science-related subjects are frequently chosen as cultural subjects d) Distribution of creditsin cultural subjects by institute. The liberal art subjects are taught in 20 institute. English and physical education courses are taught in all instituions. The social science subjects are taught in 15 colleges and the basic Psycology and the Basic sociology are the most popular subjects. The natural science subjects are taught in 7 colleges and Biology and Chemistry are the most popular subjects among them. e) Distribution of credits in major basic courses by institute. Most of the institutes select Anatomy, Microbiology, Physiology, biochemistry and Pathology as basic major courses. f) Comparison of the required and elective courses for nursing major by institutions. Subjects and credit ranges in major are varing by institute. More than half of the respondents select the following subjects as required major subjects. (1) Adults Health Nursing and Practice (19.5 credits) (2) Mother and Child Care and Practice (8.9 credits) (3) Community Health Care and Practice (8.5 credits) (4) Psychiatric Nursing Care and Practice (8.1 credits) (5) Nursing Management and Practice (3.9 credits) (6) Fundamental of Nursing, Nursing Research and Health Assessment and Practice. Three institutions select Introduction to nursing, Rehabilitation Nursing, School Nursing, Public Health Nursing, Nursing English, Communication, Human Development as electives in nursing major. 3) Educational environment a) Nursing institution There are forty-three 3-year colleges and seventeen 4-year colleges and 81.4% of which are private b) Number of students and faculty 19.2% of the students are in 4-year colleges and 80.8% of the students are in 3-year colleges. In 4-year colleges, the number of nursing faculty members is in the other of assistant professor, instructor and professor. In 3-year colleges, the orderiis lecturer, associate professor, full time instructor and assistant professor. In 4-year colleges, 18.8 students are allocated per nursing faculty and in 3-year colleges, 33.1 students are allocated per nursing faculty. c) Clinical practices 66.7% of the 4-year colleges practice over 1201 hours in clinic and 28.5% of 3-year colleges practice over 1201 hours in clinic. In 4-year colleges, 11.5 students are allocated per nursing faculty and in 3-year colleges,17 students are allocated per nursing faculty The survey shows no difference in the procedure between 4-year colleges and 3-year colleges but 3-year colleges choose the more variety practicing site such as special hospital and community health clinic. d) Audiovisual facilities The survey shows a lot of difference in audiovisual facilities among institution and 3-year colleges are less equipped than 4-year colleges.