• Management & Information Systems Review
• /
• v.3
• /
• pp.287-316
• /
• 1999

Cyberspace permits us to more beyond traditional face-to-face, mail and telephone surveys, yet still to examine basic issues regarding the quality of data collection: sampling, questionnaire design, survey distribution, means of response, and database creation. This article address each of these issues by contrasting and comparing traditional survey methods(Paper-and-Pencil) with Internet or Personal Computer networks-mediated (Screen-and-Keyboard) survey methods also introduces researchers to this revolutionary and innovative tool and outlines a variety of practical methods for using the Internet or Personal Computer Networks. The revolution in telecommunications technology has fostered the rapid growth of the Internet all over the world. The Internet is a massive global network and comprising many national and international networks of interconnected computers. The Internet or Personal Computer Networks could be the comprehensive interactive tool that will facilitate the development of the skills. The Internet or Personal Computer Networks provides a virtual frontier to expand our access to information and to increase our knowledge and understanding of public opinion, political behavior, social trends and lifestyles through survey research. Comparable to other technological advancements, the Internet or Personal Computer Networks presents opportunities that will impact significantly on the process and quality of survey research now and in the twenty-first century. There are trade-offs between traditional and the Internet or Personal Computer Networks survey. The Internet or Personal Computer Networks is an important channel for obtaining information for target participants. The cost savings in time, efforts, and material were substantial. The use of the Internet or Personal Computer Networks survey tool will increase the quality of research environment. There are several limitations to the Internet or Personal Computer Network survey approach. It requires the researcher to be familiar with Internet navigation and E-mail, it is essential for this process. The use of Listserv and Newsgroup result in a biased sample of the population of corporate trainers. However, it is this group that participates in technology and is in the fore front of shaping the new organizations of interest, and therefore it consists of appropriate participants. If this survey method becomes popular and is too frequently used, potential respondents may become as annoyed with E-mail as the sometimes are with mail survey and junk mail. Being a member of the Listserv of Newsgroup may moderate that reaction. There is a need to determine efficient, effective ways for the researcher to strip identifiers from E-mail, so that respondents remain anonymous, while simultaneously blocking a respondent from responding to a particular survey instrument more than once. The optimum process would be on that is initiated by the researcher : simple, fast and inexpensive to administer and has credibility with respondents. This would protect the legitimacy of the sample and anonymity. Creating attractive Internet or Personal Computer Networks survey formats that build on the strengths of standardized structures but also capitalize on the dynamic and interactive capability of the medium. Without such innovations in survey design, it is difficult to imagine why potential survey respondents would use their time to answer questions. More must be done to create diverse and exciting ways of building an credibility between respondents and researchers on the Internet or Personal Computer Networks. We believe that the future of much exciting research is based in the Electronic survey research. The ability to communicate across distance, time, and national boundaries offers great possibilities for studying the ways in which technology and technological discourse are shaped. used, and disseminated ; the many recent doctoral dissertations that treat some aspect of electronic survey research testify to the increase focus on the Internet or Personal Computer Networks. Thus, scholars should begin a serious conversation about the methodological issues of conducting research In cyberspace. Of all the disciplines, Internet or Personal Computer Networks, emphasis on the relationship between technology and human communication, should take the lead in considering research in the cyberspace.

• Journal of Gifted/Talented Education
• /
• v.19 no.3
• /
• pp.603-646
• /
• 2009

This paper explores in depth Gaston Bachelard's theory of imagination so as to establish the philosophical bases of creativity. While he had begun his studies on imagination to eliminate unreliable subjectivity hampering objectivity of philosophy of science, he was fascinated to become a philosopher of imagination by its unlimited power. Since his theory of imagination marked a prominent spot in the history of Western idea, this paper will seek its significant implications that will also shed light on the philosophical grounds of creativity. The best way to approach his theory is to differentiate whether imagination is the power of forming images or that of transforming them. If not misguided by surface simplicity of the aforementioned differentiation, it will be revealed that it has accrued strata in the history of Western idea. The power of forming images is related to theory of mimesis or of representation, and to ocularcentric and logo-centric structures. Bachelard strongly opposes to the theory of imagination as power of forming images, since, if it is so, its expansion and development are not possible. He thereby constructs the theory of imagination as power of transforming images. The force of movement lies at the core of his theory. Imagination as an ability to intuit movement is directly related to the problem of change in the history of Western idea. If an entity is incessantly changes itself, it becomes a crucial role of imagination to capture the force perse in the perpetual movement without distortedly and abruptly fixing it at a still point of time and space. Bachelard criticizes such a method that makes movement a controllable entity consisting of partitioned moments of space; instead, he constructs theory of imagination that reveals the true power of indispensable movement. Furthermore, it will be revealed that Bachelard's theory has more affinities with Kantian imagination and reflective judgement of aesthetics than the past researches on Bachelard showed. This paper, by means of the above investigation, will transcend the superficiality of defining what are Bachelard's formal, material, and dynamic imaginations; simultaneously, it will bear philosophical conditions of possibility that makes us experience imagination fully. These conditions also become the philosophical foundations of creativity. It will draw to a provisional close its imaginative journey of everlasting movement by making ontological and ethical dimensions of imagination and creativity.

• Korean Journal of Health Education and Promotion
• /
• v.20 no.2
• /
• pp.35-61
• /
• 2003

Background： The purpose of this study was to develop a structured and individualized smoking prevention program for adolescents by utilizing a multimedia computer-assisted instruction model and to empirically assess its effect. Method： For the purpose of this study, a guide book of smoking prevention program for middle and high school students was developed as the first step. The contents of this book were summarized and developed into an actual multimedia CAI smoking prevention program according to the Gane ＆ Briggs instructional design and Keller's ARCS motivation design models as the second step. At the final step, the short-tenn effects of this program were examined by an experiment. This experiment were made for middle school and high school students and the quasi experimental design was the pretest - intervention - posttest. The measured data was attitude, belief, and knowledge about smoking, interest in the program, and learning motivation. Result： The results of this study were as follows： First, the guide book of a smoking prevention program was developed and the existing literature on adolescent smoking was analyzed to develop the content of the guide book. Then the curriculum was divided into three main domains on tobacco and smoking history, smoking and health, adolescent smoking and each main domain was divided into sub-domains. Second, the contents of the guide book were translated into a multimedia CAI program of smoking prevention througn Powerpoint software according to the instructional design theory. The characteristics of this program were interactive, learner controllable, and structured The program contents consisted of entrance(5.6％), history of tobacco(30％), smoking and health(38.9％), adolescent smoking(22.2％), video(4.7％), and exit(1.6％). Multimedia materials consisted of text(121), sound and music, image(still 84, dynamic 32), and videogram(6). The program took about 40 minutes to complete. Third, the results on analysis of the program effects were as follows： 1) There was significant knowledge increase between the pre-test and post-test with total mean difference 3.44, and the highest increase was in the 1st grade students of high school(p＜0.001). 2) There was significant decrease in general belief on smoking between the pre-test and post-test with total mean difference 0.28. In subgroup analysis, the difference was significantly higher in the 1st grade of high school (p<0.001), low income class (p<0.001), and daily smokers (p<0.01). 3) There was no significant difference in attitudes on his personal smoking between the pre-test and post-test. 4) The interest in the program seemed to lower as students got older. The score of motivation toward this prevention program was the highest in the middle school 3rd grade. Among sub-domains of motivation, the confidence score was the highest. Conclusion： To be most effective, the smoking prevention program for adolescents should utilize the most up-to-date and accurate information on smoking, and then instructional material should be developed so that the learners can approach the program with enjoyment. Through this study, a guide book with the most up-to-date information was developed and the multimedia CAI smoking prevention program was also developed based on the guide book. The program showed positive effect on the students' knowledge and belief in smoking.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.62-74
• /
• 2010

This study aims to examine what factors citizens value in urban parks and green spaces in terms of usage and aesthetic value and to find ways to deal with the changing patterns of user satisfaction for these various green elements. To achieve this, the study developed a dynamic model employing a transactional approach to evaluate environmental quality for 1999 and 2007 in Anyang City as well as a conceptual model of parks and greens satisfaction. This study relied on an empirical study method including the 1999 and 2007 green conditional survey and citizen questionnaires totaling 573 in the year 1999 and 982 in the year 2007. As a result, first, the factor 'urban parks' is the most important factor and 'cityscape' is the second most important factor in parks and greens satisfaction(PGS). Second, PGS in turn causes environmental quality satisfaction(EQS), which is related to two items--'urban livability' and 'aesthetic quality'--in the model. This means that PGS is the intervening variable of urban livability. Third, the factor analysis resulted in six factors: cityscape, urban green, linear facilities, urban parks, riverside green, and urban forest. 'Riverside green' emerged as a factor in 2007 as a result of public participation in the 'Anyang River Revitalization Project'. Fourth, through a transactional view, the environmental changes result in either a change in or stability of public attitude. The levels of satisfaction were elevated but patterns of satisfied-unsatisfied items remained unchanged for most factors. The perception of riverside a greenway and linear surface facilities(pedestrian walkways, biking and jogging trails, etc.) have changed positively. PGS changed significantly in 2007, as a result of urban events and development, including parks, rivers and greenways which were built through the joint effort of the local government and civic participation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.1-11
• /
• 2011

Many researchers have studied on the methods to improve the processor performance. However, high integrated semiconductor technology for improving the processor performance causes many problems such as battery life, high power density, hotspot, etc. Especially, as hotspot has critical impact on the reliability of chip, thermal problems should be considered together with performance and power consumption when designing high-performance processors. To alleviate the thermal problems of processors, there have been various researches. In the past, mechanical cooling methods have been used to control the temperature of processors. However, up-to-date microprocessors causes severe thermal problems, resulting in increased cooling cost. Therefore, recent studies have focused on architecture-level thermal-aware design techniques than mechanical cooling methods. Even though architecture-level thermal-aware design techniques are efficient for reducing the temperature of processors, they cause performance degradation inevitably. Therefore, if the mechanical cooling methods can manage the thermal problems of processors efficiently, the performance can be improved by reducing the performance degradation due to architecture-level thermal-aware design techniques such as dynamic thermal management. In this paper, we analyze the cooling efficiency of high-performance multicore processors according to mechanical cooling methods. According to our experiments using air cooler and liquid cooler, the liquid cooler consumes more power than the air cooler whereas it reduces the temperature more efficiently. Especially, the cost for reducing $1^{\circ}C$ is varied by the environments. Therefore, if the mechanical cooling methods can be used appropriately, the temperature of high-performance processors can be managed more efficiently.

• Journal of Science Education
• /
• v.33 no.1
• /
• pp.12-30
• /
• 2009

The purpose of this study was to analyze recognition characteristics of science gifted students on the earth system based on their thinking style. The subjects were 24 science gifted students at the Science Institute for Gifted Students of a university located in metropolitan city in Korea. The students' thinking styles were firstly examined on the basis of the Sternberg's theory of mental self-government. And then, the students were divided into two groups: Type I group(legislative, judicial, global, liberal) and Type II group(executive, local, conservative) based on Sternberg's theory. Data was collected from three different type of questionnaires(A, B, C types), interview, word association method, drawing analyses, concept map, hidden dimension inventory, and in-depth interviews. The findings of analysis indicated that their thinking styles were characterized by 'Legislative', 'Executive', 'Anarchic', 'Global', 'External', 'Liberal' styles. Their preference were conducting new projects and using creative problem solving processes. The results of students' recognition characteristics on earth system were as follows: First, though the two groups' quantitative value on 'System Understanding' was very similar, there were considerable distinctions in details. Second, 'Understanding the Relationship in the System' was closely connected to thinking styles. Type I group was more advantageous with multiple, dynamic, and recursive approach. Third, in the relation to 'System Generalization' both of the groups had similar simple interpretational ability of the system, but Type I group was better on generalization when 'hidden dimension inventory' factor was added. On the system prediction factor, however, students' ability was weak regardless of the type. Consequently, more specific development strategies on various objects are needed for the development and application of the system learning program. Furthermore, it is expected that this study could be practically and effectively used on various fields related to system recognition.

• Journal of Korean Society of Transportation
• /
• v.23 no.1
• /
• pp.93-102
• /
• 2005

An Origin-Destination (O/D) is considered as one of the important information in route choices and trip assignments. A household interview survey is deemed to be the traditional and the most widely used method in making sample O/D and its conversion to the total O/D. Some researchers have studied to estimate dynamic O/D from the relationship between link volumes and trip assignment model. Nowadays, owing to the recent rapid spread of cellular phones. Location information of the cellular phone through the Base Station(BS) is considered as an alternative to O/D estimation. In this study, the methodology of generating BS-based O/D and the methodology of converting this O/D into an administrative district-based O/D are proposed. The information of GPS positions and cellular BS positions have acquired by establishing GPS equipment and cellular phone on taxies in Cheongju. Three weeks data are collected and used in estimating O/D by matching them on a digital map. Scatter diagram and sample correlation coefficients are used to investigate the similarity of the GPS-based O/D pattern among weeks, among days, and among times in day. The results show that there are few significant differences among weeks. But there is a difference in O/C pattern between weekday and weekend. Furthermore, there is a difference between morning peak and afternoon peak. Two methodologies are proposed to convert BS-based O/D into an administrative district-based O/D. The first one is to use the distribution pattern of GPS coordinates, the other is to use the coverage area of the BSs. To validate such converted O/D, GPS O/D is used as a true value. The statical analyses through scatter diagram, MAE and RMSE shows that there is few significant defference of pattern between the estimated BS-based O/D and GPS O/D. In the case of using only cellular information, the methodology using coverage area of the BSs is recommended for estimating O/D.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1739-1756
• /
• 2021

Atmospheric nitrogen dioxide (NO₂) is mainly caused by anthropogenic emissions. It contributes to the formation of secondary pollutants and ozone through chemical reactions, and adversely affects human health. Although ground stations to monitor NO₂ concentrations in real time are operated in Korea, they have a limitation that it is difficult to analyze the spatial distribution of NO₂ concentrations, especially over the areas with no stations. Therefore, this study conducted a comparative experiment of spatial interpolation of NO₂ concentrations based on two linear-regression methods(i.e., multi linear regression (MLR), and regression kriging (RK)), and two machine learning approaches (i.e., random forest (RF), and support vector regression (SVR)) for the year of 2020. Four approaches were compared using leave-one-out-cross validation (LOOCV). The daily LOOCV results showed that MLR, RK, and SVR produced the average daily index of agreement (IOA) of 0.57, which was higher than that of RF (0.50). The average daily normalized root mean square error of RK was 0.9483%, which was slightly lower than those of the other models. MLR, RK and SVR showed similar seasonal distribution patterns, and the dynamic range of the resultant NO₂ concentrations from these three models was similar while that from RF was relatively small. The multivariate linear regression approaches are expected to be a promising method for spatial interpolation of ground-level NO₂ concentrations and other parameters in urban areas.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.85-93
• /
• 2021

The seventy percentage of Korean Peninsular is covered by the mountainous area, and the depth of west sea and south sea is relatively shallow. Therefore, a large scale land reclamation from the sea has been implemented for the construction of industrial complex, residental area, and port and airport facilities. The common problem of reclaimed land is consisted of soft ground, and hence it has low load bearing capacity as well as excessive settlement upon loading on the ground surface. The hollow concrete block has been used to reinforce the loose and soft foundation soil where the medium-high apartment or one-story industrial building is being planned to be built. Recently the earthquakes with the magnitude of 4.0~5.0 have been occurred in the west coastal and southeast coastal areas. Lee (2019) reported the advantages of hollow concrete block reinforced shallow foundation through the static laboratory bearing capacity tests. In this study, the dynamic behavior of hollow concrete block reinforced sandy ground with filling the crushed stone in the hollow space has been investigated by the means of shaking table test with the size of shaking table 1000 mm × 1000 mm. Three types of seismic wave, that is, Ofunato, Hachinohe, Artificial, and two different accelerations (0.154 g, 0.22 g) were applied in the shaking table tests. The horizontal displacement of structure which is situated right above the hollow concrete block reinforced ground was measured by using the LVDT. The relative density of soil ground are varied with 45%, 65%, and 85%, respectively, to investigate the effectiveness of reinforcement by hollow block and measured the magnitude of lateral movement, and compared with the limit value of 0.015h (Building Earthquake Code, 2019). Based on the results of shaking table test for hollow concrete block reinforced sandy ground, honeycell type hollow block gives a large interlocking force due to the filling of crushed stone in the hollow space as well as a great interface friction force by the confining pressure and punching resistance along the inside and outside of hollow concrete block. All these factors are contributed to reduce the great amount of horizontal displacement during the shaking table test. Finally, hollow concrete block reinforced sandy ground for shallow foundation is provided an outstanding reinforced method for medium-high building irrespective of seismic wave and moderate accelerations.