• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.337-337
• /
• 2012

Dye sensitized solar cell (DSSC) having high efficiency with low cost was first reported by Gr$\ddot{a}$tzel et al. Many DSSC research groups attempt to enhance energy conversion efficiency by modifying the dye, electrolyte, Pt-coated electrode, and $TiO_2$ films. However, there are still some problems against realization of high-sensitivity DSSC such as the recombination of injected electrons in conduction band and the limited adsorption of dye on $TiO_2$ surface. The surface of $TiO_2$ is very important for improving hydrophilic property and dye adsorption on its surface. In this paper, we report a very efficient method to improve the efficiency and stability of DSSC with nano-structured $TiO_2$. Atmospheric plasma system was utilized for nitrogen plasma treatment on nano-structured $TiO_2$ film. We confirmed that the efficiency of DSSC was significantly dependent on plasma power. Relative in the $TiO_2$ surface change and characteristics after plasma was investigated by various analysis methods. The structure of $TiO_2$ films was examined by X-ray diffraction (XRD). The morphology of $TiO_2$ films was observed using a field emission scanning electron microscope (FE-SEM). The surface elemental composition was determined using X-ray photoelectron spectroscopy (XPS). Each of plasma power differently affected conversion efficiency of DSSC with plasma-treated $TiO_2$ compared to untreated DSSC under AM 1.5 G spectral illumination of $100mWcm^{-2}$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.3
• /
• pp.391-400
• /
• 2009

The purpose of this study is to investigate the efficacy of safflower yellow colorant as a natural dye for hair coloring. The dyeing properties of safflower yellow colorant on hair were explored to obtain optimum conditions. Also, the effect of mordant was studied in terms of dye uptake, colorfastness, and hair damage to better understand the characteristics of the colorant. Tensile strength measurement and SEM analysis were carried out for investigating hair damage to light exposure and washing. On the basis of obtained results considering possible hair damage, optimum dyeing conditions were set 100%(o.w.h.) colorant concentration, pH 5, $40^{\circ}C$, and 20min. Dye uptake was improved more effectively by repeated dyeing rather than by increasing concentration. Pre-mordanting method improved dye uptake slightly, irrespective of mordant type. The safflower yellow colorant produced Y colors on hair. Cu and Fe mordants improved washing and light fastness slightly. Better strength retention was obtained with the mordanted-dyed hair than the unmordanted-dyed hair after light irradiation for 40 hours and 10 repeated washing. The hair was more damaged by light exposure than by washing. It was concluded that the safflower yellow colorant can be used as a natural semi-permanent hair dye producing Y color without mordanting.

• Advances in environmental research
• /
• v.5 no.3
• /
• pp.189-200
• /
• 2016

This study aimed at advanced oxidation of hetero tri-functional reactive dye Acid orange 7 using photo-Fenton conditions in a lab-scale experiment. Decolourisation of Acid Orange 7 dye by Fenton's process was dependent on concentration of Hydrogen peroxide, Ferrous sulphate, pH, and contact time. A $2^3$ factorial design was used to evaluate the effects of these key factors: pH, Fe(II), and $H_2O_2$ concentration, for a dye concentration of 50 mg/L with COD of 340 mg/L at pH 3.0. The response function was removal of colour under optimised conditions; pH 3.0, [Fe(II)] 40.83 mg/L, [$H_2O_2$] 4.97 mmol/L; 13.6 min. of treatment resulting in 100% colour removal. The final COD of treated wastewater was nil suggesting that AOP is a potentially useful process of color removal and dye degradation/mineralisation of effluent having AO7. Minimum contact time for complete decolourisation was at 5 mmol/l $H_2O_2$ concentration. Increase in $FeSO_4$ (mg/l) concentration resulted in decrease of time for complete decolourisation. Box-Behnken Design was used to optimize the process variables. Maximum and minimum levels of pH (3-5), $H_2O_2$ (4-6 mmol/l), $FeSO_4$ (30-46 mg/l) and contact time (5-15 minutes) were used. The statistical analysis revealed a value of 0.88 for coefficient of regression ($R^2$) indicating a good fit of model. Calculated F-value was found higher than the tabulated value confirming to significance of the model. Based on student's t-test, Ferrous sulphate, pH, and contact time have a positive effect on the percent decolourisation of Acid Orange 7.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.1
• /
• pp.135-145
• /
• 2017

In order to analysis on color difference of yellow natural dyes, I have dyed cellulose and protein fabrics. The results of experiment have been analysed by wavelength of maximum absorption, amounts of dye uptake, color difference, Hunter's value and Munsell's value. The results from these analyses are as follows : Bud of pagoda tree, Amur cork, and Curcuma showed greenish yellow color, Gardenia Jasminoides showed reddish yellow color. Barberry root showed reddish yellow color with post-mordanting method on cellulose fabric. Moreover, Dupioni silk was dyed in reddish yellow color by Barberry root and Rhubarb. In addition to Chroma index, Gardenia Jasminoides and Curcuma showed clear color overall. However, dyeing rayon and silk by Barberry root, and dyeing silk by Rhubarb showed clear color. Comparing all the results to actual dyed materials, Bud of pagoda tree had small dye uptake, and both ${\Delta}a$ and ${\Delta}b$ value were short which can't recognized the yellow color easily. Dye uptake of Amur cork and Gardenia Jasminoides was small just like Bud of pagoda tree. However, ${\Delta}b$ value order was Gardenia Jasminoides>Amur cork>Bud of pagoda tree. Therefore, Gardenia Jasminoides recognized reddish yellow because of big value of red color and yellow color. In case of Barberry root and Rhubarb which have larger dye uptake, Baberry root recognized yellow color on rayon only, and couldn't recognized yellow color on bleached cotton fabric, ramie, silk, and dupioni silk. Rhubarb recognized yellow color on rayon with pre-mordanting method only, but recognized silk and dupioni silk as brown like color. Moreover, we could not analyze color by dye uptake, Lab, and H(v/c) for Barberry root and Rhubarb. As a result, I think we need to attach color table for the research paper which handled the color of dyeing materials.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.461-466
• /
• 2011

In this study, the fluorine doped $TiO_2$ was prepared as a photoelectrode in order to improve the efficiency of dye-sensitized solar cells and estimated the electrochemical characterizations. The energy conversion efficiency of the prepared dye-sensitized solar cells using fluorine doped $TiO_2$ was calculated from a current-voltage curve. The efficiency of prepared dye-sensitized solar cells was improved by about maximum three times by F-doping on $TiO_2$. It was suggested that the efficiency of dye-sensitized solar cells was improved by hybrid semiconductors of $TiO_2/TiOF_2$ in photoelectrode based on reduced $TiOF_2$ energy level via fluorine doping. It can be confirmed that the electron transport was faster but the electron recombination was slower by doping fluorine on $TiO_2$ in photoelectrode through intensity-modulated photocurrent spectroscopy and intensity-modulated photovoltage spectroscopy analysis.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.321-329
• /
• 2022

The effect of low-dye taping technique applied to flexible flat-footed adolescents on mSEBT and Standing long jump in place was investigated. The subjects of this study were 35 youths with flexible flat feet, 17 people with elastic tape and 17 people with non-elastic tape, and the low-dye taping technique was applied. The data analysis of this study used t-test to compare before and after the application of group intervention, and between each group. As a result of the study, significant results were found before and after the application of the intervention in mSEBT and Standing long jump in place (p<.05), and there was no significant difference in comparison between groups (p>.05). In conclusion, the low-dye taping technique applied to adolescents with flexible flat feet is effective for mSEBT and Standing long jump in place, and low-dye taping is appropriate as an intervention method to see the immediate effect of raising the inner longitudinal bow.

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.50-57
• /
• 2006

Well known environmental wastes from dye industry were separated by the micellar electrokinetic capillary chromatography(MECC). These wastes include H-acid modifier and 2-naphthylamine-1,5-disulfonic acid, and are known to be the diazo components of the azo dye. The results of the separation were compared with the result obtained by the HPLC using ion-pairing mechnism. MECC method was also applied to separate a few direct dyes including Direct Blue 2, Direct Blue 6 and Direct Blue 15, and reactive dye such as Reactive Orange 4. Informations about the diazo components of any azo dye could be obtained by comparison of electropherogram of the reduction solution of given dye with those obtained from standard materials such as H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid and 2-naphthylamine-1,5-disulfonic acid which are used as diazo components of the typical azo dyes. It has been concluded that MECC and HPLC with ion-pairing mechanism could be successfully applied for the analysis of unknown dyes and their diazo components.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.4 no.2
• /
• pp.84-90
• /
• 2012

It is described that the total analysis of CD-R, a digital recording media, including the planning and performing chemical analysis of cross sectional structure of recording layer, dye composition and chemical structure as an example of design for chemical analysis. Since chemical analysis of unknown sample is often involved the complicated process requiring many experiences and knowledge, students feel difficulties in planning the procedure of chemical analysis and selecting analytical methods. Thus, an example of chemical analysis is provided here to help student understanding the hole procedure of CD-R analysis. In this study, SEM is used to determine the cross sectional structure of PC substrate and recoding layer of CD-R. The dyes in recording layer is dissolved with solvent and separated with using TLC, analyzed with using UV-Vis absorption spectrometer. Then, the chemical structure of each component is determined with using GC-MS, NMR and mass spectrometer.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.917-925
• /
• 2006

The aim of our research was to apply experimental design methodology in the optimization of photocatalytic degradation of azo dye(Reactive orange 16). The reactions were mathematically described as a function of parameters amount of $TiO_2(x_1)$, and dye concentration($x_2$) being modeled by the use of the Box-Behnken method. The results show that the responses of color removal(%)($Y_1$) in photocatalysis of dyes were significantly affected by the synergistic effect of linear term of $TiO_2(x_1)$ and dye concentration($x_2$). Significant factors and synergistic effects for the $COD_{Cr}$, removal(%)($Y_2$) were the linear term of $TiO_2(x_1)$ and dye concentration($x_2$). However, the quadratic term of $TiO_2(x_1^2)$ and dye concentration($x_2^2$) had an antagonistic effect on $Y_1$ and $Y_2$ responses. Canonical analysis indicates that the stationary point was a saddle point for $Y_1$ and $Y_2$, respectively. The estimated ridge of maximum responses and optimal conditions for $Y_1:(X_1,\;X_2)$=(1.11 g/L, 51.2 mg/L) and $Y_2:(X_1,\;X_2)$=(1.42 g/L, 72.83 mg/L) using canonical analysis was 93% and 73%, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2765-2768
• /
• 2013

The effect of $TiO_2$ nanorods (TNR) and nanoparticles (TNP) composite photoelectrodes and the role of TNR to enhance the energy conversion efficiency in dye-sensitized solar cells (DSSCs) was investigated. The 5% TNR content into the TNP photoelectrode significantly increased the short-circuit current density ($J_{sc}$) and the open-circuit potential ($V_{oc}$) with the overall energy conversion efficiency enhancement of 13.6% compared to the pure TNP photoelectrode. From the photochemical and impedemetric analysis, the increased $J_{sc}$ and $V_{oc}$ for the 5% TNR/TNP composite photoelectrode was attributed to the scattering effect of TNR, reduced electron diffusion path and the suppression of charge recombination between the composite photoelectrode and electrolyte or dye.