• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.3
• /
• pp.305-316
• /
• 2011

Cracked teeth are a common problem with incomplete fracture that typically shows pain on biting and temperature stimuli. The most common cause of crack is known to be the masticatory accident. Predisposing factors were aging, old restoration, and iatrogenic stress concentration, etc. Accurate diagnosis is needed for detecting the extent of crack and pulp vitality. There are many diagnostic tools like bite test, direct observation with transillumination, dye penetration, and radiographs. Immediate treatment for pain relief and occlusal adjustment would be needed. Composite resin and bonded amalgam showed favorable prognosis. Moreover, cusp protection is reliable permanent treatment for cracked teeth. The purpose of this article is to review the literature about the prevention, diagnosis, and treatment for cracked teeth.

• Journal of the Korean Society of Costume
• /
• v.55 no.5 s.95
• /
• pp.101-107
• /
• 2005

In this article, mordant absorption rate by the Change of temperature and fabric, discharge level by water washing, mordant density and method in mordant dye are going to be handled. Besides, how treatment method will have an effect on absorption rate and color, is also going to be covered. An atom extinction photometer was used to measure the amount of mordant absorbed in fabric at each temperature and mordant type. It turned out that absorption rate differs according to the type of mordant and sample or temperature. Also it turned out that the mordant input amount has little influence on absorption rate, that is to say, if though you use more mordants, just tiny amount of mordant is going to be absorbed in cloth. It is true that the higher temperature goes up, the better mordant absorption gets. It is found that the type of mordant and sample, treatment period affects the discharge rate. Normally $15{\~}98\%$ mordant comes off the fabric by water washing, to be specific, $17{\~}47\%$ Iron by water washing and it has better performance on cotton and nylon than silk, $1\%{\~}52\%$ Aluminum by water washing and better absorption on silk, $36{\~}89\%$ Chrome by water washing and better absorption on silk, $50{\~}89\%$ copper by water washing and better absorption on silk, poor on cotton. The examination of the K/S values and colors between before and after soaping has been conducted under the circumstance that the test fabrics had been treated at $80^{\circ}C$ for 30 minutes with $0.2\%$ soaping solution. In case of pre-mordanted fabrics, the K/S value nosedived after soaping, meanwhile densely mordanted fabric's K/S value soared but after soaping, it dropped sharply. It turned out that soaping treatment deteriorates absorption much more than water washing. It's considered that $0.1 \%$ (W/V) of mordant density is appropriate.

• Natural Product Sciences
• /
• v.9 no.4
• /
• pp.249-255
• /
• 2003

Zizypus is one of the herbs widely used in Korea and China due to CNS calming effect. The present study aims to investigate the effect of the methanol extract of Zizyphi Jujube Semen (ZJS) on kainic acid (KA)-induced neurotoxicity in cultured rat cerebellar granule neuron. ZJS, over a concentration range of 0.05 to $5\;{\mu]g/ml$, inhibited KA $(500\;{\mu}M)-induced$ neuronal cell death, which was measured by a trypan blue exclusion test and a 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide (MTT) assay. Pretreatment of ZJS $(0.5\;{\mu}g/ml)$ inhibited KA$(50\;{\mu}M)$-induced elevation of cytosolic calcium concentration $([Ca^{2+}]_c)$, which was measured by a fluorescent dye, Fura 2-AM, and generation of reactive oxygen species (ROS). ZJS $(0.5\;{\mu}g/ml)$ inhibited glutamate release into medium induced by KA $(500\;{\mu}M)$, which was measured by HPLC. These results suggest that ZJS prevents KA-induced neuronal cell damage in vitro.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.1
• /
• pp.96-104
• /
• 2000

The purpose of this study was to investigate the antimicrobial activity, antimutagenic and anticancer effects and dyeing properties of the fermented indigo extract. The physiological effects of natural color extracts from colorant plants(gardenia, beet and indigo) were studied. The methanol extract of indigo showed an inhibitory effect on the growth of E. coli and Staph. aureus, and also showed a strong antimicrobial effect on Trich. mentagrophytes compared to others. The methanol extract of indigo showed antimutagenic activities against aflatoxin B1(AFB1) in the Ames test using Salmonella typhimurium TA 100. The proliferation of Clone M-3 mouse melanoma cells and A431 human epidermoid carcinoma cells was inhibited by the methanol extract of indigo. So we decided to use natural indigo for dyeing the fabrics because of those effects. Dried indigo leaves were fermented at variouss temperature and the fermented indigo was reduced by using alkaline(NaOH, Ca(OH)2) and glucose to dye the fabrics. The values of K/S fermented indigo showed the highest value when it was fermented at 3$0^{\circ}C$. The indigo fermented at 3$0^{\circ}C$ had the greatest number of total bacterial counts and we identified one of the main microorganisms as Aspergillus niger. This microorganism was responsible for the indigo fermentation and accelerated indigo fermentation. So it can be supposed to reduce the fermentation period of indigo by inoculating Aspergillus niger into the indigo leaves at 3$0^{\circ}C$.

• Journal of Environmental Health Sciences
• /
• v.36 no.4
• /
• pp.313-322
• /
• 2010

The aim of this research was to apply experimental design methodology to optimization of conditions of electrochemical oxidation of Rhodamine B (RhB) and N, N-Dimethyl-4-nitrosoaniline (RNO, indicative of the OH radical). The reactions of electrochemical oxidation of RhB degradation were mathematically described as a function of the parameters of current ($X_1$), NaCl dosage ($X_2$) and pH ($X_3$) and modeled by the use of the central composite design. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the removal efficiency of RhB and RNO and test variables in a coded unit: RhB removal efficiency (%) = $94.21+7.02X_1+10.94X_2-16.06X_3+3.70X_1X_3+9.05X_2X_3-{3.46X_1}^2-{4.67X_2}^2-{7.09X_3}^2$; RNO removal efficiency (%) = $54.78+13.33X_1+14.93X_2- 16.90X_3$. The model predictions agreed well with the experimentally observed result. Graphical response surface and contour plots were used to locate the optimum point. The estimated ridge of maximum response and optimal conditions for the RhB degradation using canonical analysis was 100.0%(current, 0.80 A; NaCl dosage, 2.97% and pH 6.37).

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.68-74
• /
• 2018

Cobalt-incorporated zeolitic imidazolate framework ZIF-8 was synthesized by a simple one-pot synthesis method at room temperature. Powder X-ray diffraction patterns and energy dispersive X-ray spectrum confirmed the formation of the bimetallic Co/Zn-ZIF structure. UV-Vis diffuse reflectance spectra revealed that the bimetallic ZIF had a lower HOMO-LUMO gap compared with ZIF-8 due to the charge transfer process from organic ligands to cobalt centers. A hydrolytic stability test showed that Co/Zn-ZIF is very robust in aqueous solution - the most important criterion for any material to be applied in photodegradation. The photocatalytic efficiency of the synthesized samples was investigated over the Indigo Carmine (IC) dye degradation under solar simulated irradiation. Cobalt incorporated ZIF-8 exhibited high efficiency over a wide range of pH and initial concentration. The degradation followed through three distinct stages: a slow initial stage, followed by an accelerated stage and completed with a decelerated stage. Moreover, the photocatalytic performance of the synthesized samples was highly improved in alkaline environment rather than in acidic or neutral environments, which may have been because in high pH medium, the increased concentration of hydroxyl ion facilitated the formation of hydroxyl radicals, a reactive species responsible for the breaking of the Indigo Carmine structure. Thus, Co/Zn-ZIF is a promising and green material for solving the environmental pollution caused by textile industries.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.12
• /
• pp.1757-1764
• /
• 2013

Trichoderma harzianum ZF-2 producing laccase was isolated from decaying samples from Shandong, China, and showed dye decolorization activities. The objective of this study was to optimize its culture conditions using a statistical analysis of its laccase production. The interactions between different fermentation parameters for laccase production were characterized using a Plackett-Burman design and the response surface methodology. The different media components were initially optimized using the conventional one-factor-at-a-time method and an orthogonal test design, and a Plackett-Burman experiment was then performed to evaluate the effects on laccase production. Wheat straw powder, soybean meal, and $CuSO_4$ were all found to have a significant influence on laccase production, and the optimal concentrations of these three factors were then sequentially investigated using the response surface methodology with a central composite design. The resulting optimal medium components for laccase production were determined as follows: wheat straw powder 7.63 g/l, soybean meal 23.07 g/l, $(NH_4)_2SO_4$ 1 g/l, $CuSO_4$ 0.51 g/l, Tween-20 1 g/l, $MgSO_4$ 1 g/l, and $KH_2PO_4$ 0.6 g/l. Using this optimized fermentation method, the yield of laccase was increased 59.68 times to 67.258 U/ml compared with the laccase production with an unoptimized medium. This is the first report on the statistical optimization of laccase production by Trichoderma harzianum ZF-2.

• Archives of Plastic Surgery
• /
• v.35 no.2
• /
• pp.115-120
• /
• 2008

Purpose: Oncostatin M(OSM) is a multifunctional cytokine that belongs to the interleukin(IL)-6 family. Although there have been a number of studies that focused on the role and mechanism of OSM in various organs and tissues, there are few reports on its effect on wound healing. The final purpose of this project is to evaluate the effect of OSM on wound healing. This pilot study was designed to investigate the effect of OSM on proliferation and matrix synthesis of human dermal fibroblasts, which are the major components of the wound healing. Methods: Excess skin that was obtained from patients who underwent skin grafts, was used for this study. From this material, fibroblasts were isolated and cultured. The cultured fibroblasts were treated with one of four concentrations of OSM. The OSM concentrations used were 0, 50, 100, and 200 ng/ml, respectively. After the OSM treatment, cell proliferation was determined by the MTT assay, collagen synthesis by the C1CP method, GAG levels by the Blyscan Dye method. The parameter levels of each group were compared. Results: OSM treatment increased all the components tested in the study. In particular, cell proliferation, GAG synthesis demonstrated statistically significant increases(p<0.05 in the Mann-Whitney U-test). The highest increase in all the components was obtained at a 100 ng/ml concentration of OSM.Conclusion: The results of the present study indicate that OSM stimulates proliferation and matrix synthesis of human dermal fibroblast and the optimal concentration for wound healing is 100 ng/mL.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.4
• /
• pp.298-305
• /
• 2003

Polygalae Radix (PR) from Polygala tenuifolia. (Polygalaceae) is traditionally used in China and Korea, since this herb has a sedative, antiinflammatory, and antibacterial agent. To extend pharmacological actions of PR in the CNS on the basis of its CNS inhibitory effect, the present study examined whether PR has the neuroprotective action against kainic acid (KA) -induced cell death in primarily cultured rat cerebellar granule neurons. PR, over a concentration range of 0.05 to $5{\mu}g/ml$ inhibited KA $(500\;{\mu}M)$-induced neuronal cell death, which was measured by a trypan blue exclusion test and a 3-[4,5-dimethylthiazol-2-y1]-2,5-diphenyl-tetrazolium bromide (MTT) assay. PR $(0.5{\mu}g/ml)$ inhibited glutamate release into medium induced by KA $(500\;{\mu}M)$, which was measured by HPLC. Pretreatment of PR $(0.5{\mu}g/ml)$ inhibited KA $(500\;{\mu}M)$-induced elevation of cytosolic calcium concentration $([Ca^{2+}]_c)$ which was measured by a fluorescent dye, Fura 2-AM, and generation of reactive oxygen species (ROS). These results suggest that PR prevents KA-induced neuronal cell damage in vitro.

• Journal of Applied Biological Chemistry
• /
• v.62 no.4
• /
• pp.355-359
• /
• 2019

In vivo micronucleus tests were performed to investigate the mutagenic potential of 4-butylaniline and N-butylaniline, which are used in dye intermediates and organic intermediates respectively. Groups of 5 male ICR mice were treated with vehicle or 4-butylaniline for 2 consecutive days by oral gavage at concentrations of 0 (control), 64, 160, 400, and 1000 mg/kg. Statistically significant and dose-dependent increases were found for micronuclei frequencies in male mice (p <0.05). These results suggest that 4-butylaniline can induce genetic effects in the micronuclei of male mouse bone marrow cells. Based on the positive results obtained in cytogenetic analyses of somatic cells in vivo, Globally Harmonized System of Classification and Labelling of Chemicals Category 2 was assigned. N-butylaniline was administered for 2 consecutive days by oral gavage to male ICR mice at dose of 0 (control), 64, 160, 400, and 800 mg/kg. N-butylaniline tested negative for micronuclei induction in mice, although N-butylaniline was associated with micronucleus induction at the highest dose. Based on the negative results obtained for cytogenetic analyses of somatic cells in vivo, "Not Classified" was assigned.