• 한국산학기술학회논문지
• /
• 제8권3호
• /
• pp.502-507
• /
• 2007

이동가입자 수신단에서의 평균 수신전력 레벨이 핸드오프 임계값과 수신기 임계값 사이에 있는 영역을 핸드오프 영역이라 하며, 가입자가 핸드오프 영역에 머무르는 시간을 핸드오프 시간으로 정의한다. 시뮬레이션 분석 결과 핸드오프 시간은 감마분포를 따름이 입증되었으며[7], 따라서 본 논문에서는 감마분포에서의 모수(parameter)를 해석적 방법으로 구한다. 그리고 해석적 방법의 검증을 위해 평균과 표준편차, 모수를 시뮬레이션 결과와 비교하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.258-261
• /
• 2006

This study introduces the control of duration time of impulse noises emitted from a high voltage COS fuse of a transformer. When a high voltage COS fuse becomes a short circuit by the over current, the peak sound pressure level over 150 dB(A) is generated at the distance of 2m from a COS Fuse. For the purpose of the reduction of impulse noise, in this study, the reactive type silencer has been utilized. And also electrical interrupting test was experimented. From the experimental results, the reactive type silencer has been shown to have the noise reduction of about 13 dB(A). It has been found that the electrical interception performance of the COS fuse was related to the control of the duration time of impulse noise.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.383-386
• /
• 2007

최근 국내 건설공사에 있어서 공동주택이 차지하는 비율은 나날이 증가하고 있다. 건설공사에서 공기는 직접적으로 건설사업비에 영향을 미치기 때문에 매우 중요하다. 따라서 국내에서도 공기단축을 위해 많은 노력을 하고 있는 실정이다. 이러한 추세에 따라서 공기를 단축하기 위해서는 공기에 영향을 미치는 중요요인을 분석하고, 도출된 요인들을 효과적으로 평가하기 위한 방법이 필요하다. 본 연구에서는 공동주택의 공기단축에 미치는 영향요인을 평가하는 방법으로 FMEA 기법을 제안하고자 한다.

• Reproductive and Developmental Biology
• /
• 제28권4호
• /
• pp.221-226
• /
• 2004

The present study was performed to investigate the effects of in vitro maturation (IVM) and in vitro fertilization (IVF) duration on the development of Korean Native Cattle embryos. The time of blastocyst formation and the quality of blastocysts based on cell numbers were examined. The cleavage rate increased with the length of IVF duration in the groups of 18-hr IVM, but was constant in the groups of 24-hr IVM. The development rate to the 8-cell stage was significantly higher in the IVM 18: IVF 20 group than in the IVM 24: IVF 24 group. The development rate to the blastocyst stage was highest in the IVM 18: IVF 20 group, significantly different from that of the IVM 18: IVF 16, IVM 24: IVF 20 and IVM 24: IVF 24 group. The time of blastocysts formation tended to be shorter when IVM and IVF duration were decreased. The number of inner cell mass, trophoblast and the total cells were significantly higher in the IVM 18: IVF 16 group than in the IVM 24: IVF 24 group (P<0.05). These results demonstrated that the IVM and IVF duration should be adequate for the efficient production of bovine embryos, and it might particularly be essential to determine the proper combination of IVM and IVF duration.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.123-128
• /
• 2012

For optimal reservoir operation and management, there are essential elements including water supply in agricultural reservoir and demand in irrigation district. To estimate agricultural water demand and supply, many factors such as weather, crops, soil, growing conditions cultivation method and the watershed/irrigation area should be considered, however, there are occurred water supply impossible duration under the influence of the variability and uncertainty of meteorological and hydrological phenomenon. Focusing on agricultural reservoir, amount and tendency of agricultural water supply and demand shows seasonally/regionally different patterns. Through the analysis of deviation and changes in the timing of the two elements, duration in excess of water supply can be identified quantitatively. Here, we introduce an approach to assessment of irrigation vulnerable duration for effective management of agricultural reservoir using time dependent change analysis of residual water supply and irrigation water requirements. Irrigation vulnerable duration has been determined through the comparison of water supply in agricultural reservoir and demand in irrigation district based on the water budget analysis, therefore can be used as an improved and basis data for the effective and intensive water management.

• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.56-61
• /
• 2017

Purpose: High energy requirement and long cooking time are limiting consumption of pigeon pea (Cajanus cajan), a nutritious food. This study was performed to estimate energy and time demand by different methods of cooking pigeon pea. Methods: Pigeon pea (150 g) was soaked in 2.0 L of water at ambient temperature ($29{\pm} 2^{\circ}C$) to determine hydration behavior. Cooking experiments were conducted using aluminum and pressure-cooking pots. Efficiency of cooking was evaluated using four types of cooking appliances (kerosene, liquefied petroleum gas (LPG), electric, and charcoal stoves). Normal (continuous heating until the food was satisfactorily cooked) and control (controlling the energy input to closely match the actual energy required) cooking were conducted. Energy requirement and duration of cooking were determined using standard procedures. Results: Soaking increased moisture content from 11.99 to 30.01% in 90 min, while water absorption rate decreased with soaking duration. In cooking 150 g of pigeon pea using kerosene stove, presoaked normal pressure-pot cooking method consumed the least energy (10 800 kJ) and time (205 min), while unsoaked normal cooking consumed the highest energy (18 450 kJ) and time (336 min). Using LPG stove, unsoaked normal cooking method required the highest energy (52 470 kJ), while presoaked control pressure-pot required the least energy (14 405 kJ). For electric stove, the lowest energy (15 560 kJ) and shortest duration (105 min) were recorded during control cooking of presoaked sample in the pressure-pot. Conclusions: Control cooking was not practicable using charcoal stove. Generally, kerosene stove consumed the least energy, while electric stove was found to have the shortest duration of cooking.

• 대한조선학회논문집
• /
• 제55권4호
• /
• pp.306-312
• /
• 2018

To navigate in ice-covered waters, the ice-breaking process is required. The ice-breaking mode depends on material properties of sea ice and ice conditions. The ice-breaking mode is classified into ramming and continuous ice-breaking. The ramming is effective on large ice features, such as thick ice ridge and icebergs, and the continuous ice-breaking is on level ice. In general, the impact time duration of crushing or bending on ice sheets is from 0.2 to 1.0 second. However, impact duration in ramming will be increased. The Korean ice-breaking research vessel ARAON conducted her research voyage in the Antarctic sea during the winter of 2012. The IBRV ARAON measured strain in ramming and continuous ice-breaking. Strain gauge signals were recorded during the planned ice-breaking performance and the unplanned ice transits in heavy ice conditions. The aim of this study is to investigate the ice load signals measured in ramming processes under the heavy ice condition. Based on the time history of the signals, a raising time, a half-decaying time and time duration were investigated and compared with the previous study which was suggested the five profiles of the ice load signals.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1922-1928
• /
• 2008

The thermal rating of a conductor are maximum continuous current capacity and short time emergency current capacity. The overload operation for a faults have an effect on a conductor lifetime. Its time duration and overload level are limited to facility conditions of transmission lines. The short time emergency current capacity in KOREA observe the KEPCO's DESIGN RULE 1210, but its rules are not included to concept of an allowable short time duration. This papers are described to the calculation concept of short time emergency current capacity considering a time duration and an overload level. And we suggested a operation grouping and its maximum conductor temperature considering facility conditions - conductor lifetime, stability of connection points, conductor height above ground and clearance, in the operating and new T/L.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.577-581
• /
• 2009

The fixed duration test has been widely used in the reliability demonstration test for rolling stocks. This article deals with how to design the test statistics, acceptance criteria and the fixed duration of the MTBF(Mean Time Between Failures) demonstration test considering the consumer risk. Numerical examples are given to illustrate the dependence of the consumer risk on the test duration and MTBF requirement.

• 음성과학
• /
• 제9권3호
• /
• pp.201-210
• /
• 2002

This paper explores whether there is correlation between consonants' place and duration of adjacent vowels in English and Korean. The results showed that in English the vowels preceding alveolar stops were in general longer than the vowels before bilabial or velar stops. Consonants appeared to have their inherent length due to their place and to exhibit some compensatory effects on the duration of preceding vowels. This effect can be explained in a physiological term that the tongue tip is the organ which might be more agile in articulatory movement than the tongue body for the velars or the lower lip (and the jaw) for the bilabials is and the shorter production time of the alveolars caused the lengthening of the adjacent vowels. However, this physiological account did not hold in the case of Korean, which exhibited less consistent patterns across speakers for the consonants' place and the vowel duration. The segmental duration seemed to be timed quite consistently within a language but the pattern was not universal across languages.