• Journal of Korean Public Health Nursing
• /
• v.18 no.2
• /
• pp.205-217
• /
• 2004

This study conducted a survey with the 67 students who are in their 2nd year at 3 vocational high schools. The researcher of this study developed and operated the smoking cessation program based on the Transtheoretical model. To evaluate the effects, experiments were repeatedly done. The data were collected from June 21, 2004 till July 9, 2004. The survey was done based on the questionnaire-interview before and after education. The collected date was computerized by using SPSS-WIN 10.0 program. The results are as follows: Firstly. before education, the smoking cessation stage of change shows precontemplation stage $37.3\%$, preparation stage $37.3\%$, and contemplation stage $25.4\%$ respectively. However, after education it shows preparation stage $44.8\%$, action stage $25.4\%$, contemplation stage $19.4\%$, precontemplation stage $10.4\%$. The positive result was $62.7\%$ and smoking cessation stage of change made a 0.9 step increase. Secondly, process of change rose in all the areas except helping relationship. It also shows statistical improvement in all the fields except the dramatic relief of the experiential process, the helping relationship of behavioral process and stimulus control Thirdly, negative affective situation temptation, positive social situation temptation, and habitual strength temptation's average points decreased but showed statistical differences. Weight control temptation's average points decreased after education but didn't show statistical differences. Self efficiency increased measurably after education. Fourthly, concerning the social pros and coping pros caused by smoking, the average points were low after education and showed statistic decrease. As for the cons due to smoking, the average points increased but didn't show any statistical differences. In conclusion, thanks to the smoking cessation program applied by the Transtheoretical model, the smoking rate of vocational high school students became low and their smoking temptation also dropped considerably. In conclusion, while the pros for smoking were lessened, its corns were heightened through the educational awareness offered by this program.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.25-30
• /
• 2017

Millimeter wave (mmWave) bands are expected to improve date rate of 5G systems due to the wide available bandwidth. While severe path loss in those bands has impeded the utilization, short wavelength enables a large number of antennas packed in a compact form, which can mitigate the path loss. However, estimating the channel with a conventional scheme requires a huge training overhead, hence an efficient estimation scheme operating with a small overhead needs to be developed. The sparsity of mmWave channels caused by the limited scatterers can be exploited to reduce the overhead by utilizing compressed sensing. In this paper, we introduce compressed sensing techniques for mmWave channel estimation. First, we formulate wideband channel estimation into a sparse recovery problem. We also analyze the characteristics of random measurement matrix constructed using quantized phase shifters in terms of mutual incoherence.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.120-128
• /
• 2018

OLED Display fabrication system is one of the most complicated discrete processing systems in the world. As the glass size grows from $550{\times}650mm$ to $1,500{\times}1,850mm$ in recent years, the efficiency of Automated Material Handling System (AMHS) has become very important and OLED glass manufacturers are trying to improve the overall efficiency of AMHS. Aiming to meet the demand for high efficiency of transportation, various kind of approaches have been applied for improving dispatching rules and facility layout, while simultaneously considering the system parameters such as glass cassettes due date, waiting time, and stocker buffer status. However, these works did not suggest the operational policy and conditions of distribution systems, especially for handling unnecessary material flows such as detour. Based on this motivation, in this paper, we proposed an efficient algorithm for improving detour transportation in OLED FAB. Specifically, we considered an OLED FAB simplifying OLED production environment in a Korean company, where four stockers are constructed for the delivery of Lot in a bay and linked to processing equipments. We developed a simulation model using Automod and performed a numerical experiment using real operational data to test the performance of three operation policies under considerations. We showed that a competitive policy for assigning alternative stocker in case of detour was superior to the current dedicated policy using a specified stocker and other considered policies.

• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.169-178
• /
• 2015

Purpose: This study was to investigate usage satisfaction of multi type handpiece with equipped air-jet function Methods: The subjects of this study through the survey was conducted for fifty-nine dental technicians in Daegu and Gyeongsangbukdo from the May 7 to 19, after the June 23 to July 4 2014. The survey was about the function and quality through user testing environment by cutting zirconia specimens using appliance for zirconia. The collected date was analyzed by the statistical program SPSS Win Ver 19.0 for the satisfaction of handpiece and control system. To test for significance on each item, p<0.05 had been decided a standard. General characteristics and relationship between the handpiece and control system was performed correlation analysis. Results: The results of this study is as follows. 35 dental technicians had 1~2 years career in zirconia part as the highest 59.3%, 95% of subjects expected that the prospects for the zirconia material have bright prospects. The satisfaction of multi type handpiece and control system design and function showed a significant difference. Subjects satisfied with the design and function of the multi type showed negative correlation with those of Standard. The satisfaction of multi type handpiece showed 3.37 points of air jet, 3.05 points of noise level, 2.69 points of water flow rate, and 1.98 points of cruise function. Sample differences in all parameters showed a statistically higher difference. Conclusion: High-speed cutting mechanism of multi-type is recommended working with zirconia materials and the multi-type unit combined handpiece motor, air-turbine and air-gun will be expected the increase of user due to the high satisfaction of air jet.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1034-1040
• /
• 2006

Due to the need of increasing thermal efficiency, supercritical pressure and temperature have been utilized in power plants. It is well known that 9Cr1Mo steel is suitable fer use in power plants operating at supercritical conditions. Therefore, to ensure the safety and the soundness of the power plant, creep characterization of the steel is important. In this study, the creep characterization of the gCr1Mo steel using small punch creep(SP-Creep) test has been described. The applied load and the central displacement of the specimen in SP-Creep test have been converted to bearing stress and strain of uc, respectively. The converted SP-Creep curves clearly showed the typical three-stage behavior of creep. The steady-state creep rate and the rupture time of the steel logarithmically changed with the bearing stress and satisfied the Power law relationship. Furthermore, the Larson-Miller parameter of the SP-Creep test agreed with that of the tensile creep test. From the comparison with low Cr-Mo steels, the creep characteristics of 9Cr1Mo steel proved to be superior. Thus, it can be confirmed that the 9Cr1Mo steel is suitable for supercritical power plant.

• Journal of Preventive Medicine and Public Health
• /
• v.54 no.2
• /
• pp.103-109
• /
• 2021

Objectives: The aim of this study was to calculate the burden of stroke in Kurdistan Province, Iran between 2011 and 2017. Methods: Incidence data extracted from the hospital information system of Kurdistan Province and death data extracted from the system of registration and classification of causes of death were used in a cross-sectional study. The World Health Organization method was used to calculate disability-adjusted life years (DALYs). Results: The burden of stroke increased from 2453.44 DALYs in 2011 to 5269.68 in 2017, the years of life lost increased from 2381.57 in 2011 to 5109.68 in 2017, and the years of healthy life lost due to disability increased from 71.87 in 2011 to 159.99 in 2017. The DALYs of ischaemic stroke exceeded those of haemorrhagic stroke. The burden of disease, new cases, and deaths doubled during the study period. The age-standardised incidence rate of ischaemic stroke and haemorrhagic stroke in 2017 was 21.72 and 20.72 per 100 000 population, respectively. Conclusions: The burden of stroke is increasing in Kurdistan Province. Since health services in Iran are based on treatment, steps are needed to revise the current treatment services for stroke and to improve the quality of services. Policy-makers and managers of the health system need to plan to reduce the known risk factors for stroke in the community. In addition to preventive interventions, efficient and up-to-date interventions are recommended for the rapid diagnosis and treatment of stroke patients in hospitals. Along with therapeutic interventions, preventive interventions can help reduce the stroke burden.

• Journal of Acupuncture Research
• /
• v.38 no.1
• /
• pp.20-31
• /
• 2021

The objective was to evaluate the effectiveness and safety of acupuncture for patients with rotator cuff diseases. There were 12 electronic databases and 3 trial registries searched up to November 30th, 2019. All randomized trials were eligible, regardless of language, date of publication, or settings. The primary outcomes were pain, shoulder function, and proportion of improved participants assessed within 12 weeks of randomization of the trial. The Cochrane risk of bias for the studies was assessed. Effects sizes were presented as a risk ratio, mean difference, or standardized mean difference with a 95% confidence intervals. Grading of Recommendations Assessment, Development and Evaluation approach was adopted to rate certainty of evidence. Of the 3,686 records screened, 28 randomized trials (2,216 participants) were included in this review. The types of acupuncture included manual acupuncture, dry needling, electroacupuncture, acupotomy, warm needle acupuncture, and fire needle acupuncture. All of the studies had an unclear or high risk of bias related to more than 1 domain. Significant benefits of acupuncture in terms of pain and shoulder function were observed in all comparisons, however, the proportion of improved participants was not described in 2 comparisons. There was substantial heterogeneity among meta-analyzed trials. No serious harm was observed. For primary outcomes, the overall certainty of evidence was very low. There was very low certainty of evidence for the benefits of acupuncture for patients with rotator cuff diseases. The safety of acupuncture remains unclear due to the incompleteness of reporting. Future well-designed randomized trials with transparent reporting are required.

• Journal of dental hygiene science
• /
• v.21 no.4
• /
• pp.199-212
• /
• 2021

Background: Various oral health management programs in Korea affect the oral health improvement in the elderly Several studies have been conducted to date; however, those studies have not shown uniform results due to the differences in research methods or designs. Hence, this study aimed to review the overall research trends of the reported oral health care programs for the elderly in Korea, verify their effects, and clarify them based on the systematic literature review. Methods: The literature search selected intervention studies that applied the oral health care program for the elderly in Korea from 2001 to 2020. Following the COre, Standard, and Ideal (COSI) models presented by the US National Library of Medicine, we selected databases including Korean studies Information Service System (KISS), ScienceOn, Research Information Sharing Service (RISS), DBpia, PubMed, and Google Scholar. Of the 1,335 studies searched using keywords, titles, and abstracts, 21 were finally selected based on primary and secondary exclusion criteria. Results: The most frequent intervention period was 4 weeks, and the number of interventions varied between 2 and 90 times. As for the type of intervention, 14 studies that conducted both theory and practice were the most frequent. Significant differences in the clinical indicators, such as calculus, halitosis, salivation rate, swallowing function, and dry mouth, were found in most oral health care programs. Conclusion: Based on the results of this study, the intervention program needs further verification using multiple indicators in future studies. In addition, a study extending the intervention period and the number of samples is considered necessary for verifying continuous effectiveness of the intervention program.

• Korean Journal of Radiology
• /
• v.24 no.6
• /
• pp.574-589
• /
• 2023

Radiopharmaceuticals targeting prostate-specific membrane antigens (PSMA) are essential for the diagnosis, evaluation, and treatment of prostate cancer (PCa), particularly metastatic castration-resistant PCa, for which conventional treatment is ineffective. These molecular probes include [⁶⁸Ga]PSMA, [¹⁸F]PSMA, [Al¹⁸F]PSMA, [^99mTc]PSMA, and [⁸⁹Zr]PSMA, which are widely used for diagnosis, and [¹⁷⁷Lu]PSMA and [²²⁵Ac]PSMA, which are used for treatment. There are also new types of radiopharmaceuticals. Due to the differentiation and heterogeneity of tumor cells, a subtype of PCa with an extremely poor prognosis, referred to as neuroendocrine prostate cancer (NEPC), has emerged, and its diagnosis and treatment present great challenges. To improve the detection rate of NEPC and prolong patient survival, many researchers have investigated the use of relevant radiopharmaceuticals as targeted molecular probes for the detection and treatment of NEPC lesions, including DOTA-TOC and DOTA-TATE for somatostatin receptors, 4A06 for CUB domain-containing protein 1, and FDG. This review focused on the specific molecular targets and various radionuclides that have been developed for PCa in recent years, including those mentioned above and several others, and aimed to provide valuable up-to-date information and research ideas for future studies.

• Horticultural Science & Technology
• /
• v.35 no.2
• /
• pp.232-242
• /
• 2017

The goal of marker-assisted backcrossing (MAB) is to significantly reduce the number of breeding generations required by using genome-based molecular markers to select for a particular trait; however, MAB systems have only been developed for a few vegetable crops to date. Among the types of molecular markers, SNPs (single-nucleotide polymorphisms) are primarily used in the analysis of genetic diversity due to their abundance throughout most genomes. To develop a MAB system in Chinese cabbage, a high-throughput (HT) marker system was used, based on a previously developed set of 468 SNP probes (BraMAB1, Brassica Marker Assisted Backcrossing SNP 1). We selected a broad-spectrum TuMV (Turnip mosaic virus) resistance (trs) Chinese cabbage line (SB22) as a donor plant, constructing a $BC_1F_1$ population by crossing it with the TuMV-susceptible 12mo-682-1 elite line. Foreground selection was performed using the previously developed trsSCAR marker. Background selection was performed using 119 SNP markers that showed clear polymorphism between donor and recipient plants. The background genome recovery rate (% recurrent parent genome recovery; RPG) was good, with three of 75 $BC_1F_1$ plants showing a high RPG rate of over 80%. The background genotyping result and the phenotypic similarity between the recurrent parent and $BC_1F_1$ showed a correlation. The plant with the highest RPG recovery rate was backcrossed to construct the $BC_2F_1$ population. Foreground selection and background selection were performed using 169 $BC_2F_1$ plants. This study shows that, using MAB, we can recover over 90% of the background genome in only two generations, highlighting the MAB system using HT markers as a highly efficient Brassica rapa backcross breeding system. This is the first report of the application of a SNP marker set to the background selection of Chinese cabbage using HT SNP genotyping technology.