• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.264-271
• /
• 1995

This paper presents the data parallel processing method between a PC and a micro-controller. To implement the method a dual port RAM for a real time data processing is used. In general an A/D & D/AC card is used to send or receive the data into or from the external plant and the PC does only the computation of the A/D and the D/A data because the A/D & D/AC card does not have the ability of computation. In this study, a data parallel processing method in which the PC and micro-controller own a common dual port RAM, is introduced, so that the PC can compute the A/D and D/A data and control the plant simultaneously. The PC system with a micro-controller and the common dual port RAM is designed and its effectiveness is investigated experimentally considering the performance of both the computation of data and the controlling and monitoring the external plant.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.384-389
• /
• 2003

A new two-step soft-output Viterbi algorithm (SOVA) decoder architecture is presented. A significant reduction in the decoding latency can be achieved through the use of the dual-port RAM in the survivor memory structure of the trace-back unit. The system complexity can be lowered due to the determination of the absolute value of the path metric differences inside the add-compare-select (ACS) unit. The proposed SOVA architecture was verified successfully by the functional simulation of Verilog HDL modeling and the FPGA prototyping. The SOVA decoder achieves a data rate very close to that of the conventional Viterbi Algorithm (VA) decoder and the resource consumption of the realized SOVA decoder is only one and a half times larger than that of the conventional VA decoder.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.169-175
• /
• 2014

NG-SDH system is connected with networks throughout optical fibers. Network synchronization controller is a necessary for the data synchronization in each optical transmission system. In this paper, we have design and implementation the network synchronization controller using SOPC(system on a programmable chip) design technic. For this network synchronization controller we use FPGA in Altera. FPGA includes 32bit CPU, DPRAM(dual port ram), digital input/output port, transmitter and receiver framer, phase difference detector. We also confirm that designed network synchronization controller satisfies the ITU-T G.813 timing requirements.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.57-64
• /
• 2002

The structure of conventional CAM(Content Addressable Memory) cell, used to Look-up table scheme in Huffman CODEC, is not performed by being separated in reading, writing and match operation. So, there is disadvantages that the control is complicated, and the floating states of match line force wrong operation to be happened in reading, writing operation. In this paper, in order to improve the disadvantages and proces the data fast, fast Look-up table is designed using DBLCAM(Dual Bit Line CAM)-performing the reading, writing operation and match operation independently and Two-port SRAM being more fast than RAM in an access speed. Look-up table scheme in Huffman CODEC, using DBLCAM and Two-port SRAM proposed in this paper, is designed in Cadence tool, and layout is performed in 0.6${\mu}{\textrm}{m}$ 2-poly 3-metal CMOS full custom. And simulation is peformed with Hspice.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.287-290
• /
• 2002

This paper rotates to tile FPGA that is reffered to as the UTOSPI. The design goal of the FPGA is to convert the UTOPIA-3 bus interface to the SPI-3 bus interface, so that the SAR chips on the ATM interface board can be interfaced to the packet processor through this FPGA. We Propose a new architecture that has two Dual Port RAMs and flow control signals. To buffer data, the UTOSPI has a Dual port RAM in the receive direction and the same size of that in the transmit direction. This design has been implemented, compiled, and tested using a Xilinx Virtex-I XCV-300E FPGA.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.288-294
• /
• 2011

In this paper, the FPGA-based SoC board (Xilinx Virtex-4 ML401 EVM) is adopted to control electrical power inverter system. For marine application, its performance is shown on PC-based system for monitoring electrical characteristics of a power inverter using by the NMEA 2000 protocol. This power inverter system is achieved in Real-Time monitoring and control by dual micro-processor operation on embedded FPGA-based SoC board. One micro processor is for control (Control processor) electrical power inverter using by PWM signal. And the other microprocessor (Communication processor) is for communication with PC-based monitoring system. The two-processor is communicating each other using by dual-port ram (DPRAM). PC-based system user can control and monitor information of the electrical power inverter via NMEA 2000 based communication processor. Control and monitoring information includes the inverter status and configuration. SoC board converts this information to Parameter Group Numbers (PGNs) in the NMEA 2000 protocol. This system can be applied to marine power electronics for distributed power generation, transmission or regulation systems on the ship.

• 전기의세계
• /
• v.36 no.3
• /
• pp.190-204
• /
• 1987

본고에서는 이중입출력 메모리(Dual-Port RAM)를 이용한 영상 입력장치(Image Memory)의 설계 및 그 제어 신호 발생기에 대하여 논하였다. 이중 입출력 메모리 소자인 TMS4161은 기존의 표준 64K x 1DRAM Port와 256bit의 내부적 Shift REgister와 연결된 Serial Port가 있어서, 실시간 영상 처리 및 그래픽 용으로 사용하기에 적합하나, 그 사용에 있어서 가장 어려운 문제로 제안된 주소 신호 발생기 및 요구중재기에 대한 해결 방안을 제시하였다. 또한 서로 독립적인 두개의 입출력 장치가 있다는 장점을 이용하여 하드웨어에 의한 실시간 처리도 가능한 구조로 쉽게 확장할 수 있어서 소프트웨어에 의한 실시간 처리로 가능하리라 사료된다. 앞으로는 512x512x8의 영상 메모리 구조 뿐만 아니라 1024x1024x8의 영상메모리 구조에 대하여 더욱 연구할 필요가 있다고 본다.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.883-886
• /
• 2003

본 논문에서는 Lifting-Based Scheme을 이용한 DWT(Discrete Wavelet Transform) 의 개선된 행 처리기의 구조를 제안 하였다. 제안된 행 처리기는 3개의 Adder 와 2개의 shifter를 사용 하였고 dual-port RAM을 사용하여 파이프 라인 구조를 취하여 각 클럭마다 열처리기에서 사용할 데이터를 발생 한다. 이러한 행 처리기의 파이프 라인 구조를 개선하여 Adder를 줄이고 행 처리기의 이용률을 최대로 하여 하드웨어의 공간적 비용 절감 효과를 가져 왔다. 제안된 구조는 Verilog를 사용하여 RTL설계를 한뒤 시뮬레이션으로 그 동작을 확인 하였다.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.58-67
• /
• 2019

A design of an elliptic curve cryptography (ECC) processor that supports both pseudo-random curves and Koblitz curves over $GF(2^m)$ defined by the NIST standard is described in this paper. A finite field arithmetic circuit based on a word-based Montgomery multiplier was designed to support five key lengths using a datapath of fixed size, as well as to achieve a lightweight hardware implementation. In addition, Lopez-Dahab's coordinate system was adopted to remove the finite field division operation. The ECC processor was implemented in the FPGA verification platform and the hardware operation was verified by Elliptic Curve Diffie-Hellman (ECDH) key exchange protocol operation. The ECC processor that was synthesized with a 180-nm CMOS cell library occupied 10,674 gate equivalents (GEs) and a dual-port RAM of 9 kbits, and the maximum clock frequency was estimated at 154 MHz. The scalar multiplication operation over the 223-bit pseudo-random elliptic curve takes 1,112,221 clock cycles and has a throughput of 32.3 kbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1046-1055
• /
• 1994

In this paper, to design high speed 1 line VRAM(Video RAM) suitable for image signal processing with ASIC(Application Specific IC) method, the VRAM memory core has been designed using 3-TR dual-port dynamic cell which has excellent access time and integration characteristics. High speed pipeline operation was attained by separating the first row from the subarray 1 memory core and the simultaneous I/Q operation for a selected single address was made possible by adopting data-latch scheme. Peripheral circuits were designed implementing address selector and 1/2V voltage generator. Integrated ASIC has been optimized using 1.5[ m] CMOS design rule.