• Journal of Astronomy and Space Sciences
• /
• v.29 no.3
• /
• pp.269-274
• /
• 2012

Kinematic global positioning system precise point positioning (GPS PPP) technology is widely used to the several area such as monitoring of crustal movement and precise orbit determination (POD) using the dual-frequency GPS observations. In this study we developed a kinematic PPP technology and applied 3-pass (forward/backward/forward) filter for the stabilization of the initial state of the parameters to be estimated. For verification of results, we obtained GPS data sets from six international GPS reference stations (ALGO, AMC2, BJFS, GRAZ, IENG and TSKB) and processed in daily basis by using the developed software. As a result, the mean position errors by kinematic PPP showed 0.51 cm in the east-west direction, 0.31 cm in the north-south direction and 1.02 cm in the up-down direction. The root mean square values produced from them were 1.59 cm for the east-west component, 1.26 cm for the south-west component and 2.95 cm for the up-down component.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.484-486
• /
• 2008

본 논문은 중용량 및 대용량에 적합하며 다중 출력 전원시스템의 슬림화에 유리한 새로운 LLC 공진형 DC/DC 컨버터에 관한 것으로써, 별도의 Post-regulator 및 제어 IC의 추가없이 정밀한 이중출력이 가능한 새로운 방식의 컨버터를 제안한다. 제안된 컨버터는 두 개의 트랜스를 이용하여 각 출력 단에 대한 독립된 두 개의 공진탱크를 갖기 때문에 탱크 설계가 용이하고, 다중출력을 필요로 하는 전원시스템의 소형화 및 슬림화에 유리하다. 또한 두 개의 출력을 각각 주파수와 듀티로 제어함에 따라 Post-Regulator 가 필요 없으며, 이로 인해 기존 LLC 공진형 DC/DC 컨버터에 비해 효율 및 발열 특성이 매우 우수하며, 저가의 컨버터 구현이 가능하다. 최종적으로 제안된 컨버터의 우수성과 타당성 검증을 위해, 실제로 42"" FHD급 PDP 용 전원회로를 위한 시작품을 제작하여 고찰된 실험결과를 제시한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.157-163
• /
• 2003

A systematic numerical experiment has been conducted to study droplet gasification in high pressure environments with pressure oscillations. The general frame of previous rigorous model[1] is retained but tailored for flash equilibrium calculation of vapor-liquid interfacial thermodynamics. Time-dependent conservation equations of mass, momentum, energy, and species concentrations are formulated in axisymmetric coordinate system for both the droplet interior and ambient gases. In addition, a unified property evaluation scheme based on the fundamental equation of state and empirical methods are used to find fluid thermophysical properties over the entire thermodynamic domain of interest. The governing equations with appropriate physical boundary conditions are numerically time integrated using an implicit finite-difference method with a dual time-stepping technique. A series of calculation have been carried out to investigate the gasification of an isolated n-pentane droplet in a nitrogen gas environment over a wide range of ambient pressures and frequencies. Results show that the mean pressures and frequencies of the ambient gas have strong influences on the characteristics of the droplet gasification. The amplitude of the response increases with increasing pressure, and the magnitude of the vaporization response increases with the frequency.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.3
• /
• pp.35-39
• /
• 2013

In this paper, we present test results of developed 100 W class linear compressor for Stirling-type pulse tube refrigerator. The fabricated linear compressor has dual-opposed configuration, free piston and moving magnet type linear motor. Power transfer, efficiency and required pressure waveform are predicted with designed and measured specifications. In experiments, room temperature test with flow impedance is conducted to evaluate performance of developed linear compressor. Flow impedance is loaded to compressor with metering valve for flow resistance, inertance tube for flow inertance and buffer volumes for flow compliance. Several operating parameters such as input voltage, current, piston displacement and pressure wave are measured for various operating frequency and fixed input current level. Behaviors of dynamics and performance of linear compressor as varying flow impedance are discussed with measured experimental results. The developed linear compressor shows 124 W of input power, 86 % of motor efficiency and 60 % of compressor efficiency at its resonant operating condition.

• Human Ecology Research
• /
• v.53 no.2
• /
• pp.195-208
• /
• 2015

This study explored general marriage migration for 180 unmarried Vietnamese immigrant women and identified differences in recognition after the choice of marriage. The methods used were frequency analysis, kai verification, and independent t verification were conducted. The findings were as follows. First, unmarried Vietnamese women showed a receptive attitude towards marriage migration with the less-educated group more likely to opt for marriage migration. Economic benefit expectations topped other factors in regards to the image of marriage migrant women and motivation. Dual national identity benefits were also indicated. Second, the perception of external and illusionary images of the spouses of marriage migrant women was low; however, the perception of good occupations and gender equality was high. A vague expectancy of marriage was also found. The perception was high that children from multi-cultural families would be global bilingual talents and adjust to school; however, the perception of social discrimination or prejudice was low. The perception of social discrimination was low concerning the perception of social integration towards marriage migrant women; however, the perception of identities, cultural differences and employment was present. By contrast, the group opting for marriage migration showed a significantly low perception of social discrimination and difficulty in employment. The suggested measures are to regulate and maintain forms of marriage type, reinforce prior training systems for Vietnamese immigrant women (and spouses), enhance multicultural recognition, and supplement multicultural policies.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.7 no.1
• /
• pp.41-58
• /
• 2007

A compact and broadband $4{\times}1$ array antenna was developed for 3G smart antenna system testbed. The $4{\times}1$ uniform linear array antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% ($VSWR{\leq}1.5$), 21.78% ($VSWR{\leq}2$) with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.242-244
• /
• 2011

최근 넓은 창고에서 물품들을 좀 더 효율적으로 관리하기 위해 RFID(Radio Frequency Identification)를 이용한 창고관리시스템(Warehouse Management System)에 대한 연구가 활발히 진행되고 있다. 창고관리시스템에서 중요한 요소 중 하나는 물품의 정확한 위치파악이다. 특히 냉동 창고에서는 물품 보관을 하는 coldroom의 안팎 온도차이로 인한 물품의 적재위치 오류는 물품의 변질을 가져오게 하므로 실시간 정확한 위치를 파악하는 것이 중요한 요소가 된다. 기존의 연구방법들에서는 coldroom 입구에 RFID리더기를 설치하여 물품이 인식될 때 단지 그곳에 적재되는 것으로 인식하였다. 그러나 이러한 방법으로는 물품이 coldroom으로 들어가다 다시 돌아 나오는 경우, 반대로 물품이 밖으로 나가다 다시 들어오는 경우 등과 같은 상황에서는 물품의 위치가 잘못된 정보를 가지게 된다. 본 논문에서는 냉동 창고관리시스템에서 2대의 RFID리더기가 설치된 지게차를 이용하여 물품의 적재위치 정확성을 높이기 위한 방법을 제안한다. 지게차에 설치된 2개의 RFID리더기는 각각 천장에 부착된 태그로부터 위치데이터와 지게차에 적재된 물품데이터를 획득한다. 2개의 리더기로부터 수집된 데이터를 분석하여 물품의 입/출고 상황정보와 물품의 이동경로정보를 실시간으로 모니터링 할수 있다. 이를 통해 실시간 냉동 창고 적재위치 오류를 감지해 냄으로써 냉동 창고관리시스템의 물품보관에 대한 효율성을 높일 수 있게 된다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.51-58
• /
• 2008

We propose a new duplex which does not require guard resources in MIMO environments. In the proposed duplex, two virtual channels in spatial domain are generated by preceding and postcoding MIMO channels, not to use guard resources in either the time or frequency domain. The capacity can be improved by properly selecting precoder and postcoder. We show the improved capacity of the proposed duplex outperforms conventional duplexes even without guard resources.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.305-308
• /
• 2002

An 1.8V 6bit IGSPS ADC for high speed data acquisition is discussed in this paper. This ADC is based on a flash ADC architecture because the flash ADC is the only practical architecture at conversion rates of IGSPS and beyond. A straightforward 6bit full flash A/D converter consists of two resistive ladders with 63 laps, 63 comparators and digital blocks. One important source of errors in flash A/D converter is caused by the capacitive feedthrough of the high frequency input signal to the resistive reference-lauder. Consequently. the voltage at each tap of the ladder network can change its nominal DC value. This means large transistors have a large parasitic capacitance. Therefore, a dual resistive ladder with capacitor is employed to fix the DC value. Each resistive ladder generates 32 clean reference voltages which alternates with each other. And a two-stage amplifier is also used to reduce the effect of the capacitive feedthrough by minimizing the size of MOS connected to reference voltage. The proposed ADC is based on 0.18${\mu}{\textrm}{m}$ 1-poly 6-metal n-well CMOS technology, and it consumes 307㎽ at 1.8V power supply.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.1
• /
• pp.27-32
• /
• 2003

Highly reproducible side-wall process for the fabrication of the fine gate length as small as 40nm was developed. This process was utilized to fabricate 40nm InGaAs HEMTs with the 65% strained channel. With the usage of the dual $SiO_2$ and $SiN_x$ dielectric layers and the proper selection of the etching gas, the final gate length (Lg) was insensitive to the process conditions such as the dielectric over-etching time. From the microwave measurement up to 40GHz, extrapolated fT and fmax as high as 371 and 345 GHz were obtained, respectively. We believe that the developed side-wall process would be directly applicable to finer gate fabrication, if the initial line length is lessened below the l00nm range.