• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.310-312
• /
• 2009

The heterodyne laser interferometer has been widely used in precise measurement field. However, the accuracy is limited by the nonlinearity error caused from incomplete laser sources and nonideal optical components. In this paper, we propose the Dual-EKF which estimates states and weights simultaneously to improve the resolution of heterodyne laser interferometer. As a proof, we demonstrate the effectiveness of our proposed method through experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.157-158
• /
• 2012

본 논문은 리튬 폴리머 배터리의 수명 감소에 대한 경향성 테스트를 토대로 이중 확장 칼만 필터(Dual EKF)를 이용하여 배터리의 SOC(State-of-Charge) 및 SOH(State-of-Charge) 방법을 제안하였다. 배터리에 수명에 따른 임피던스 변화를 테스트를 수행함으로써 등가회로 모델상에서 수명에 따른 변화가 가장 큰 내부 저항을 선택함으로써 배터리의 SOH 추정을 위해 선택하였다. 배터리 모델은 4.2V, 1440mAh의 리튬폴리머 전지에서 추출되었다. 배터리는 Bulk 커패시터, 두 개의 R-C회로, 직렬 저항을 사용하여 모델링하였다. Dual EKF를 모델에 적용하기 위해 캐패시터 전압은 개방 회로 전압(OCV)을 나타내는데 사용된다. Dual EKF는 충/방전 기기인 TOSCAT-5200에 의해 얻은 실험 데이터로 테스트하였다.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.398-410
• /
• 2017

This work presents the design of a dual extended Kalman filter (EKF) as a state/parameter estimator suitable for adaptive state-of-charge (SoC) estimation of an automotive lithium-iron-phosphate ($LiFePO_4$) cell. The design of both estimators is based on an experimentally identified, lumped-parameter equivalent battery electrical circuit model. In the proposed estimation scheme, the parameter estimator has been used to adapt the SoC EKF-based estimator, which may be sensitive to nonlinear map errors of battery parameters. A suitable weighting scheme has also been proposed to achieve a smooth transition between the parameter estimator-based adaptation and internal model within the SoC estimator. The effectiveness of the proposed SoC and parameter estimators, as well as the combined dual estimator, has been verified through computer simulations on the developed battery model subject to New European Driving Cycle (NEDC) related operating regimes.

• International Journal of Control, Automation, and Systems
• /
• 제5권4호
• /
• pp.388-396
• /
• 2007

This paper describes a multipath estimation method for Global Positioning System (GPS) dual frequency carrier phase measurements. Multipath is a major error source in high precision GPS applications, i.e., carrier phase measurements for precise positioning and attitude determinations. In order to estimate and remove multipath at carrier phase measurements, an array GPS antenna system has been used. The known geometry between the antennas is used to estimate multipath parameters. Dual frequency carrier phase measurements increase the redundancy of measurements, so it can reduce the number of antennas. The unscented Kalman filter (UKF) is recently applied to many areas to overcome some of the limitations of the extended Kalman filter (EKF) such as weakness to severe nonlinearity. This paper uses the UKF for estimating multipath parameters. A series of simulations were performed with GPS antenna arrays located on a straight line with one reflector. The geometry information of the antenna array reduces the number of estimated multipath parameters from four to three. Both the EKF and the UKF are used as estimation algorithms and the results of the EKF and the UKF are compared. When the initial parameters are far from true parameters, the UKF shows better performance than the EKF.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1212-1220
• /
• 2015

This article presents a new nonlinear joint (state and parameter) estimation algorithm based on fusion of Kalman filter and randomized unscented Kalman filter (UKF), called Kalman randomized joint UKF (KR-JUKF). It is assumed that the measurement equation is linear. The KRJUKF is suitable for time varying and severe nonlinear dynamics and does not have any systematic error. Finally, joint-EKF, dual-EKF, joint-UKF and KR-JUKF are applied to a CSTR with cooling jacket, in which production of propylene glycol happens and performance of KR-JUKF is evaluated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.60-62
• /
• 2007

The open circuit voltage (OCV) is widely used to estimate the state of charge (SOC) in many estimation algorithms. However, the relationship between the OCV and SOC can not be exactly same for all batteries. Because the conventional OCV-SOC differs between batteries, there is a problem that the relationship of the OCV-SOC should be measured to accurately estimate the SOC. Therefore, the conventional OCV-SOC is modified to a new relationship in this paper. Thus, problems resulting from the defects of the extended Kalman filter (EKF) can be avoided by preventing the relationship from varying. In this paper, SOC and capacity of the lithium-ion battery are estimated using the dual EKF with the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.349-351
• /
• 2004

The classical dynamic backpropagation learning algorithm has the problems of learning speed and the determine of learning parameter. The Extend Kalman Filter(EKF) is used effectively for a state estimation method for a non linear dynamic system. This paper presents a learning algorithm using Dual Extended Kalman Filter(DEKF) for Fully Recurrent Neural Network(FRNN). This DEKF learning algorithm gives the minimum variance estimate of the weights and the hidden outputs. The proposed DEKF learning algorithm is applied to the system identification of a nonlinear SISO system and compared with dynamic backpropagation learning algorithm.

• 제어로봇시스템학회논문지
• /
• 제19권2호
• /
• pp.158-163
• /
• 2013

The fusion of the GPS (Global Positioning System) and DR (Dead Reckoning) is widely used for position and latitude estimation of vehicles such as a mobile robot, aerial vehicle and marine vehicle. Among the many types of aerial vehicles, grater focus is given on the quad-rotor and accuracy of the position information is becoming more important. In order to exactly estimate the position information, we propose the fusion method of GPS and Gyroscope sensor using the DEKF (Dual Extended Kalman Filter). The DEKF has an advantage of simultaneously estimating state value and a parameter of dynamical system. It can also be used even if state value is not available. In order to analyze the performance of DEKF, the computer simulation for estimating the position, the velocity and the angle in a circle trajectory of quad-rotor was done. As it can be seen from the simulation results using own proposed DEKF instead of EKF on own fusion method in the navigation of a quad-rotor gave better performance values.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1225-1231
• /
• 2009

인공위성의 반작용 휠 클러스터는 보통 4개의 반작용 휠로 구성이 된다. 각각의 반작용 휠은 인공위성의 자세 축과 일치하게 배치되지 않기 때문에 하나의 반작용 휠에 고장이 일어난 경우 반작용 휠 자체의 센서를 이용한 방법 외에는 고장 분리가 매우 어렵다. 본 논문에서는 이중 필터를 이용하여 고장 검출에 효과적인 파라미터를 구성하고, 인공위성의 반작용 휠 각각이 정지 고장을 일으킬 경우를 가정하여 이중 필터와 다중 가설 필터를 이용하여 반작용 휠의 고장분리기를 설계하였다. 또한 이를 4개의 반작용 휠로 자세제어가 이루어지는 인공위성 시스템에 적용한 시뮬레이션으로 고장 검출 및 분리 성능이 향상되는 것을 검증하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권4호
• /
• pp.195-203
• /
• 2017

A 2U cube satellite called SNUGLITE has been developed by GNSS Research Laboratory in Seoul National University. Its main mission is to perform actual operation by mounting dual-frequency global positioning system (GPS) receivers. Its scientific mission aims to observe space environments and collect data. It is essential for a cube satellite to control an Earth-oriented attitude for reliable and successful data transmission and reception. To this end, an attitude estimation and control algorithm, Attitude Determination and Control System (ADCS), has been implemented in the on-board computer (OBC) processor in real time. In this paper, the Extended Kalman Filter (EKF) was employed as the attitude estimation algorithm. For the attitude control technique, the Linear Quadratic Gaussian (LQG) was utilized. The algorithm was verified through the processor in the loop simulation (PILS) procedure. To validate the ADCS algorithm in the ground, the experimental verification via a single axis Hardware-in-the-loop simulation (HILS) was used due to the simplicity and cost effectiveness, rather than using the 3-axis HILS verification (Schwartz et al. 2003) with complex air-bearing mechanism design and high cost.