• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.10a
• /
• pp.137-140
• /
• 1991

The TDX-10 Time Switch architecture has modularity, high reliability and considerable large switch fabric having separated and both-way 1K time slot interchange switching circuit elements. In this paper, we present key functions, architecture, features and traffic characteristic of TDX-10 Time Switch. And we also describe some basic implementation technologies such as Frame Base Read-Write Separation Method, Multi-Write Method and Read-Write Separation Technique with Dual-port Memory.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.247-248
• /
• 2007

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.6
• /
• pp.310-316
• /
• 2001

본 논문에서는 10N March 테스트 알고리즘에 기반한 내장된 이중 포트 메모리를 위한 효율적인 테스트 알고리즘을 제안하였다. 제안된 알고리즘은 각각의 포트에 대해 독립적으로 테스트 알고리즘을 적용함으로써 각각의 포트에 대해서 단일 포트 메모리 테스트 알고리즘을 적용하는 방법에 비해 시간 복잡도를 20N에서 8.5N으로 시간 복잡도를 줄였다. 그리고 제안된 알고리즘은 주소 디코더 고장, 고착 고장, 천이 고장, 반전 결합 고장, 동행 결합 고장을 모두 검출할 수 있다.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.1
• /
• pp.47-56
• /
• 2000

As a shipboard dependency for the safety and reliability becomes very important, the need for solid systems providing non-stop workload has been increased. This system is heartbeat that transmits shipboard state, audit and control information to the land. So, this paper describes a ship's LAN configuration method for the safety and reliability. In order to achieve these requirements, network, server and disk fault tolerance techniques are surveyed, and dual network configuration model, cluster server configuration method are presented and tested based on the survey.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.388-396
• /
• 2002

In this paper, An aperture-coupled microstrip patch antenna operating at WLL frequency range(Rx : 2.3∼2.33Ghz, Tx : 2.37 ∼2.4Ghz) for WLL repeater is designed and fabricated. FR-4 epoxy substrate with 4.7 relative permittivity is inserted between feed-line and patch plane. Aperture-coupled structure is employed for consideration of bandwidth improvement and gain\`s characteristics. Air gap is arranged at each layer for bandwidth extension and radome is used as a protector in the upper patch. In this paper, both 1 port and 2 port are designed as 1$\times$2 array antenna which uses T-junction and λ$\_$g//4 transformer. Here, 1 port is used as transmitting/receiving antenna and 2 port is used as receiving antenna. Functionally independent two antennas using space diversity arrange slots between two antennas in order to be placed at the same place. As a result, we obtained a excellent isolation below -40dB and return loss is reduced by means of slots arrangement between patch and antenna.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.6
• /
• pp.371-377
• /
• 2007

In this paper, we propose the effective operating device in the container freight station by applying the RTLS (Real Time Location System) that provides information on the container's location in real time so that the performance of the port operating system can be improved. For this, we proposed the improved dual cycling method made with the new application of two types of container's location & yard tractor's location information. we applied the RTLS to the container freight station to send the container location data to the operating system in real time; we designed the data on the Yard Tractor's location to be received via the GPS receiver and then be sent to the operating system in real time via the CDMA module. According to the analysis and evaluation of the performance of the proposed method, up to 24% of performance improvement was shown compared with the existing methods, in aspect of evaluation of work time, work time deviation and performance. Therefore, we proved that the RTLS and the GPS receiver are essential elements for efficient port operation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.42-50
• /
• 2007

This paper presents design methods for dual-frequency(2.4/5.8GHz) active receiving antennas. The proposed active receiving antennas are designed to interconnect the output port of a wideband antenna to the input port of an active device of High Electron Mobility Transistor directly and to receive RF signals of 2.4GHz and 5.2GHz simultaneously where the impedance matching conditions are optimized by adjusting the length of $1/20{\lambda}_0$(@5.8GHz) CPW transmission line in the planar antenna The bandwidth of implemented dual-frequency active receiving antennas is measured in the range of 2.0GHz to 3.1GHz and 5.25GHz to 5.9GHz. Gains are measured of 17.0dB at 2.4GHz and 15.0dB at 5.2GHz. The measured noise figure is 1.5dB at operating frequencies.

• Journal of Satellite, Information and Communications
• /
• v.8 no.3
• /
• pp.47-51
• /
• 2013

In this paper, we present design and test results of a Ka-band dual-band ortho-mode transducer (OMT) for use in a feed assembly for the very small aperture terminals (VSATs). The designed ortho-mode transducer have wideband characteristics to separate the signals that have two orthogonal linear polarizations operating at 20GHz of receive frequency band and at 30GHz of transmit frequency band. In addition, in order to reduce the volume of the feed assebly, a Boifot based ortho-mode transducer has been designed with a dual-band. Experimental results for the design verification, the return loss in the receive band and in the transmit band for the horizontal polarization showed over 20dB and 21dB, respectively, and for the vertical polarization showed over 20dB and 24dB, respectively. The port isolation for the horizontal polarization and the vertical polarization showed over 43dB and 52dB, respectively, in the receive band and in the vertical band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.47-53
• /
• 2023

In this paper, We designed a waveguide-type feed structure that converts millimeter wave dual-polarized signals into monopulse signals and presented a manufacturing method. At millimeter-wave such as the W band, the size of the waveguide is very small, making it very difficult to manufacture complex structures. Therefore, because manufacturability is important for the waveguide-type feed structure in the millimeter-wave, electro forming and diffusion bonding were proposed and verified in this study. The designed monopulse feed structure consists of eight 180° hybrids that combine 90° hybrids and self-compensating phase shifters, and four OMTs to separate dual polarization. The designed feed structure was designed to facilitate electro forming and diffusion bonding, and the manufactured feed structure was verified through a network analyzer. It was confirmed that the two proposed production methods produce a monopulse signal well through the measured magnitude and phase of the port.

• Journal of Korea Port Economic Association
• /
• v.30 no.3
• /
• pp.231-257
• /
• 2014

In general, furniture industry, with its high foreign dependency, has serious logistics issues that are commonly raised in such countries as Korea, China and Japan. This leads to my different possibilities & ways of rationalizing the logistics systems that utilize port hinterlands. Thus the purpose of the present paper is to create new logistics systems which will work effectively across the three countries. In this research study, we came up with 2 logistics models in which the port hinterland of Busan serves as the distribution center for furniture industry, and the models were suggested as the cooperative logistics business systems for the North-east asian region. In the proposed models, 'Busan furniture logistics center' has the dual functions of 'the cross-docking center from China to Japan' and 'the assembly & delivery center for furniture imported by Japan'. To have this logistics business center materialized, we propose that policy-level supports from the relevant port authorities be provided in the following three aspects: overseas investment promotion focused on the furniture industry of Japan, protection & enhancement of competitiveness for the port of Busan, and uilization plans for the new port hinterland of the city.