• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.547-552
• /
• 1999

In [1], it is shown that a subclass of ETBFs, which are self-dual ETBFs can be expressed as a weighted average of median subfiltered outputs. In this paper, the ETBF is extended for real-valued input. Using this result, the scale-preservation and translation-invariance properties of the ETBFs are investigated. In particular, it is shown that the ETBFs are scale-preserving if and only if it is extended self-dual.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.23-28
• /
• 2007

A dual-band GaAs FET low noise amplifier (LNA) with an input LC-tank circuit is designed using inductance source feedback for wireless LAN, and output matching is realized with low-pass Cheyshev filter impedance transforming circuit. Some design techniques for dual band LNA have been developed including input and output design equations. The measured results shows close agreement with the predicted performance.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.530-533
• /
• 2001

Interleaved Dual Boost(IDB) converter can reduce current ripple, switching loss and harmonics without filter in input power line. Moreover, this improve power factor. In this paper, we will use the state average methode and small signal analysis at the Interleaved dual boost converter. 4-type controllers were designed by using control transfer function. The result of these controller simulations is analyzed and proposed a proper controller at IDB

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.464-466
• /
• 1998

경계선 검출은 시각 인식 또는 기계 시각 인식의 과정에서 제일 먼저 수행되는 전처리 단계이다. 경계선 검출은 컴퓨터 시각 인식성능에 매우 중대한 요인으로 작용한다. 최근 MPEG-4에서 Model Based Coding 기법이 채택되면서, 경계선 검출 및 이를 이용한 컴퓨터 시각 인식의 중요성은 날로 커지고 있다. 한편, 잡음이 있는 영상의 경계선 검출 방법으로 여러 가지가 제시되었는데, 특히 잡음의 종류가 Additive White Gaussian인 경우에는 Canny Edge Detector가, Impulse인 경우에는 Dual Stack Filter를 적용한 방법이 각각 높은 성능으로 인정을 받고 있다. 그러나 Canny Edge Detector의 경우, Canny는 이론적인 Optimal Filter를 구하는 데에 성공하였지만 실제 적용에는, 이 Optimal Filter의 근사로써 Gauss함수의 1계 도함수를 사용하였다. 본 연구에서는 Gauss함수보다는 상당히 Optimal Filter와 가까운 Filter를 얻기 위하여 웨이블릿 변환을 사용한 Liao등의 방법과, 각기 다른 Scale에서의 웨이블릿 변환들이 가지는 잡음과의 관계를 고려한 새로운 경계선 검출방법을 개발하였다. 실험결과, 본 연구에서의 방법은 기존에 사용되던 Canny Edge Detector나 Stochastic Operator보다 뛰어난 성능을 보여주었다.

• Journal of electromagnetic engineering and science
• /
• v.5 no.1
• /
• pp.21-25
• /
• 2005

In this paper, a new method is suggested to improve the frequency responses of dual-mode waveguide-filters that employ cross-shaped slots. In accordance with this method, regarding one cross-shaped slot between two cavities, the horizontal(vertical) mode in one cavity can be designed to influence far less the vertical(horizontal) mode in cavity. Therefore, it improves the overall performances. A 4th-order dual-mode filter is taken as an example and it validates the method.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.4
• /
• pp.388-396
• /
• 2007

This paper describes a multipath estimation method for Global Positioning System (GPS) dual frequency carrier phase measurements. Multipath is a major error source in high precision GPS applications, i.e., carrier phase measurements for precise positioning and attitude determinations. In order to estimate and remove multipath at carrier phase measurements, an array GPS antenna system has been used. The known geometry between the antennas is used to estimate multipath parameters. Dual frequency carrier phase measurements increase the redundancy of measurements, so it can reduce the number of antennas. The unscented Kalman filter (UKF) is recently applied to many areas to overcome some of the limitations of the extended Kalman filter (EKF) such as weakness to severe nonlinearity. This paper uses the UKF for estimating multipath parameters. A series of simulations were performed with GPS antenna arrays located on a straight line with one reflector. The geometry information of the antenna array reduces the number of estimated multipath parameters from four to three. Both the EKF and the UKF are used as estimation algorithms and the results of the EKF and the UKF are compared. When the initial parameters are far from true parameters, the UKF shows better performance than the EKF.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.64-72
• /
• 2009

In this paper, a high efficiency 2.45 GHz rectenna with a microstrip patch antenna and a dual-mode band-pass filter in which the 2nd and 3rd harmonics are suppressed, is presented. From the experimental results, the 2.45GHz rectenna using 3rd harmonic suppressed dual-mode BPF shows the conversion efficiency of 41.6% with incident power density of 0.3 mW/cm2 and the received power of 1.66 mW. This result shows high conversion efficiency because the received power of this rectenna is lower than other rectennas to be compared with. This rectenna can be applied to the WPT (Wireless Power Transmission) field for energy harvesting. Also, it is expected to be used to provide the stand-by power for the low power devices for USN, and wireless power transfer in sensor application of MEMS devices.

• Journal of the Korea Convergence Society
• /
• v.9 no.6
• /
• pp.53-60
• /
• 2018

In this paper, we described the unknown parameter identification using Dual Extended Kalman Filter for precise control of 2-link manipulator. 2-link manipulator has highly non-linear characteristic with changed parameter thought tasks. The parameter kinds of mass and inertia of system is important to handle with the manipulator robustly. To solve the control problem by estimating the state and unknown parameters of the system through the proposed method. In order to verify the performance of proposed method, we simulate the implementation using Matlab and compare with results of RLS algorithm. At the results, proposed method has a better performance than those of RLS and verify the estimation performance in the parameter estimation.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.247-255
• /
• 2020

Sand filter is a key unit process for particle removal in water purification treatments. Its long-standing use is due to on-site customized retrofit. Proper selection of filter media is one of the retrofit approaches to improve filter performance. This study described a series of controlled laboratory column tests and examined the effects of media property on filtration and backwash. When sand media of 0.51 mm in effective size was replaced by sand of 0.60 mm, the filter run increased up to 5 times in the given bed depth. The change of media property required an increase of backwash rate by 0.05 m/min to satisfy the requirement of bed expansion, more than 20%. When the anthracite was changed with lower effective size and uniformity coefficient, correlation with sand in the filter bed could be satisfied within the permissible error between media and bulk characteristics. Besides, this selection resulted in a well-stratified configuration of media layers after bed expansion. The column study showed that the correlation of property between the dual media had a significant effect on the filter productivity and backwash interval.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.45-53
• /
• 2006

In this paper, we proposed a parallel hardware architecture for deblocking filter in K264/AVC. The deblocking filter has high efficiency in H.264/AVC, but it also has high computational complexity. For real time video processing, we chose a two 1-D parallel filter architecture, and tried to reduce memory access using dual-port SRAM. The proposed architecture has been described in Verilog-HDL and synthesized on Hynix 0.25um CMOS Cell Library using Synopsys Design Compiler. The hardware size was about 27.3K logic gates (without On-chip Memory) and the maximum operating frequency was 100Mhz. It consumes 258 clocks to process one macroblock, witch means it can process 47.8 HD1080P(1920pixel* 1080pixel) frames per second. It seems that it can be used for real time H.264/AVC encoding and decoding of various multimedia applications.