• 한국건축시공학회지
• /
• 제24권1호
• /
• pp.35-42
• /
• 2024

본 연구에서는 도로 보수재로서 메틸 메타크릴레이트(MMA)의 활용 적합성을 평가하였다. A type과 B type의 2가지 MMA를 콘크리트에 적용하여 건조시간, 인장 접착 강도, 내알칼리 시험을 진행하였다. 항온항습(R), 수중(W), 수중+염화이온(N)의 3가지 조건으로 양생하여 모체의 표면 상태를 설정하였다. 시험 결과, B type MMA가 A type 보다 빠른 건조시간과 우수한 내알칼리성을 나타냈다. 인장 접착 강도는 A type이 더 높게 나타났지만, 콘크리트 모체와 함께 탈락되었다. 본 연구 범위에서는 B type이 도로 보수재로 사용하기 적합하다고 판단된다. 그러나 내구성을 고려하여 아스팔트 모체에서의 추가 실험을 진행할 필요가 있다.

• The Plant Pathology Journal
• /
• 제22권4호
• /
• pp.348-352
• /
• 2006

Barley mild mosaic virus(BaMMV) is a soilborne Bymovirus vectored by root-infecting fungus, Polymyxa graminis. Mechanism of cultivar's resistance to BaMMV in field tests are difficult to assess since resistance could be either due to the virus or to P. graminis, or both. Whereas, available mechanical inoculation methods for BaMMV and other related viruses are labor intensive, give inconsistent results and generally result in low infection rates. Inoculation method using stick with gauze(SWG) was developed for BaMMV. The improved method proved to be simple, efficient, and reliable. The infected leaf tissues were preserved by drying in a frozen state under high vaccum(freeze dried barley infected leaves) to circumvent reduction of virus infectivity during storage. Five Korean barley cultivars were mechanically inoculated with BaMMV-infected sap by the improved method. Infection rates obtained were compared with natural infection. Cultivar Naehanssalbori showed resistance to BaMMV in the field trials but was found highly susceptible in the greenhouse tests by mechanical inoculation, indicating that the field resistance may be possibly due to resistance to P. graminis.

• 한국응용과학기술학회지
• /
• 제20권3호
• /
• pp.237-242
• /
• 2003

The high-solid coatings were prepared by blending the synthesized acrylic resin in the previous paper and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The impact resistance, $60^{\circ}C$ specular gloss, cross-hatch adhension, and heat resistance of the films proved to be good, and the pencil hardness and drying time proved to be slightly poor. Especially, there was a remarkable improvement in the heat resistance. This improvement may stem from the regular arrangement of ethyl groups introduced into the acrylic resin. From a viscoelastic measurement using a rigid-body pendulum, curing was accelerated with the $T_g$ value. With the increase in $T_g$, log damp value was lowered and dynamic viscoelasic $T_g$ of a cured film was increased.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.405-411
• /
• 2015

Carbon composites for flexible fiber heating element were examined to improve the electrical conductivity in this study. Carbon composites using carbon black, denka black, super-c, super-p with/without CNF or dispersant such as BCS03 and Sikament-nn were prepared. Carbon composite slurry was coated on plane film and yarns(cotton, polyester) and the performances of prepared heating materials were investigated by checking electrical surface resistance, adhesion strength. The plane heating element using carbon black under natural drying condition($25^{\circ}C$) had better physical properties such as surface resistance(185.3 Ohm/sq) and adhesion strength(above 90%) than those of other carbon composite heating elements. From these results, polyester heating element coated by carbon black showed better electrical line resistance(33.2 kOhm/cm) than cotton heating element. Then, it was found that polyester heating element coated by carbon black with CNF(3 wt%) and BCS03(1 wt%) appeared best properties(0.604 kOhm/cm).

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.300-305
• /
• 2004

High-solid coatings were prepared by blending of previosly synthesized acrylic resins and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The impact resistance, cross-hatch adhesion, $60^{\circ}$specular gloss, and heat resistance of the films proved to be good, and the pencil hardness and drying time proved to be slightly poor. Especially, there was a remarkable improvement in the heat resistance. This improvement may stem from the regular arrangement of ethyl groups introduced into the acrylic resin. As a result of Rigid-body pendulum visco-elasticity measurement, dynamic $T_g$ values of cured films increased with dynamic $T_g$ values.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.253-254
• /
• 2022

In this study, catechol-functionalized chitosan (Cat-Chit), a well-known bioinspired polymer that imitates the basic structures and functions of living organisms and biological materials in nature, was synthesized and combined with cement mortar in various proportions. The compressive strength, tensile strength, drying shrinkage, accelerated carbonation depth, and chloride-ion penetrability of these mixes were then evaluated. In the ultraviolet-visible spectra, a maximum absorption peak appeared at 280 nm, corresponding to catechol conjugation. The sample containing 7.5% Cat-Chit polymer in water (CPW) exhibited the highest compressive strength, and its 28-day compressive strength was ~20.2% higher than that of a control sample with no added polymer. The tensile strength of the samples containing 5% or more CPW was ~2.3-11.5% higher than that of the control sample. Additionally, all the Cat-Chit polymer mixtures exhibited lower carbonation depths than compared to the control sample. The total charge passing through the samples decreased as the amount of CPW increased. Thus, incorporating this polymer effectively improved the mechanical properties, carbonation resistance, and chloride-ion penetration resistance of cement mortar.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권5호
• /
• pp.147-156
• /
• 2006

본 연구는 재생굵은골재를 이용한 콘크리트의 성능을 개선하기 위하여 SBR 라텍스를 활용하여 재생골재 콘크리트를 제조하고, 유동성과 역학적 성능 및 건조수축에 대하여 검토하였다. 실험결과 SBR 라텍스를 6%정도 혼입하면 재료분리에 저항하는 유동성을 확보할 수 있고, 압축강도 증진 및 휨강도 개선에 큰 효과가 있는 것을 알 수 있었다. 또한 건조수축의 감소에 우수한 재생골재 콘크리트를 제조할 수 있을 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.227-232
• /
• 2002

To evaluate the practical application of oyster shells as construction materials, an experimental study was performed. More specifically, the long-term mechanical properties and durability of concrete blended with oyster shells were investigated. Test results indicate that long-term strength of concrete blended with 10% oyster shells is almost identical to that of normal concrete. However, the long-term strength of concrete blended with 20% oyster shells Is appreciably lower than that of normal concrete. 1'hereby, concrete with higher oyster shell has the possibility giving a bad influence on the concrete long-term strength. Elastic modulus of concrete blended with crushed oyster shells decreases as the blending mixture ratio increases. Namely, the modulus is reduced by approximately 10∼15% when oyster shells are blended up to 20% replacing the fine aggregate. The drying shrinkage strain increases as the blending ratio increases. In addition, the existing model code of drying shrinkage does not coincide with the test results of this study. An adequate prediction equation needs to be developed. The utilization of oyster shells as the fine aggregate in concrete has an insignificant effect on freezing and thawing resistance, carbonation and sulfuric acid attack of concrete recycling. However, water permeability is considerably improved.

• 대한토목학회논문집
• /
• 제41권3호
• /
• pp.219-227
• /
• 2021

불연속 지형을 지나는 천수 흐름을 해석할 수 있는 Hwang의 기법이 채택된 수치 모의를 댐 붕괴 흐름에 의한 직립 홍수터의 범람 실험과 비교하였다. 모의 결과는 저수지, 저수로, 홍수터로 이루어진 실험 수로에서 측정한 결과와 잘 일치하였다. 특히, 댐 붕괴 흐름이 직립 홍수터로 차고 빠지는 과정이 잘 모의되었다. 흐름 저항의 종류에 따른 모의 결과의 차이는 미미하였다. 이 연구를 바탕으로 도심 하천의 범람 예측에서 정확도를 높일 수 있을 것으로 기대된다.

• KSBB Journal
• /
• 제30권3호
• /
• pp.109-113
• /
• 2015

Current drying and encapsulation methods for probiotics manufacturing are complicate and cost-burdened processes. The aim of this study was to develop a simple ingredient mixture to make probiotic granules via one-step process, providing not only a cryoprotective effect during freezing and drying but also high survival ratio in gastrointestinal tract. As cryoprotectans, commercially available ingredients including skim milk, monosaccharide (trehalose or glycerin), maltodextrins (with low or high degree of equivalents) were used. Their cryoprotective effect during lyophilization and survival ratios in artificial gastric juice and bile salt were measured against 3 strains of lactic acid bacteria (LAB) (Lactobacillus plantarum, Lb. brevis, and Lactococcus lactis). As results, 3 mixtures with different compositions showed a cryprotective effect on LAB tested and the best compostion was dependant upon LAB; skim milk 10%, trehalose 15%, glycerin 0.5%, and NaCl 1% was for Lb. plantarum and Lc. lactis, and maltodextrin 10% instead of skim milk was for Lb. brevis. In addition, those mixtures showed similar survival effect on LAB tested. These results demonstrate that skim milk or maltodextrins with trehalose, glycerin, and NACl can be effectively used for onestep lyophilization of LAB as an alternative method of encapsulation.