• 제목/요약/키워드: Dry aging

검색결과 161건 처리시간 0.031초

경사평면법에 의한 옥외용 실리콘 고무의 열화 특성 (Aging Characteristics of Silicone Rubber for Outdoor Use by Inclined-Plane Method)

  • 김정호;박용관;조한구
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1997년도 추계학술대회 논문집
    • /
    • pp.501-504
    • /
    • 1997
  • We investigated the tracking and erosion resistance of the silicone rubber by Inclined-Plane Method. And. with the variation of experiment time, the chance of the leakage current waveform was evaluated. The typical leakage current waveform was the form of mixture of sinusoidal wave and rectifying wave. It is thought that the sinusoidal wave is due to conductivity of contaminant when wet. and the rectifying wave is due to arc of dry band.

  • PDF

조선왕조실록 밀랍본 복원기술 연구(제3보) -습열열화처리를 이용한 복원용 한지의 내구성 평가- (The Study of Restoration Technique of Wax-Treated Volume for the Annals of the Joseon Dynasty (III) -Evaluation of Durability of Korean Traditional Paper using Moist-heat Aging Treatment-)

  • 정선화;정선영;서진호;정소영
    • 펄프종이기술
    • /
    • 제45권5호
    • /
    • pp.49-55
    • /
    • 2013
  • To explore the paper materials for restoration of the Annals of the Joseon Dyansty, durability of the three type of the traditional Korean Papers were estimated in this study, through moist heat artificial aging test. Three types(D, F, and G) which showed the best preservation performance in dry heat and UV treatment in the previous study were selected and artificial accelerated aging treatment with moist-heat process was conducted; the viscosity change rate was D>G>F; folding endurance G>D>F; $L^*$ value F>D>G; $a^*$ and $b^*$ change rate D>G>F; brightness decrease rate D>G>F, suggesting paper F showed the least change rate in physical/optical properties. Also the CLSM image observation showed fair coherence among fibers and confirmed paper mulberry. And in FDI extraction from each sample, paper F showed the highest value. Overall, paper F (traditional glossy paper) showed the highest stability against thermal treatment. It confirms that paper F is suitable as restoration paper for tributary remains including the annals of the Joseon Dynasty for its steady strength/viscosity decrease rate and color change rate.

Quality characteristics of Tteokbokki (Rice Cake) depending on cultivars and particle sizes of dry-milling rice flour

  • Song, Eun-Ju;Choi, So-Ra;Song, Young-Eun;Lee, In-Sok;Lee, Ki-Kwon
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.276-276
    • /
    • 2017
  • This study was examined to establish a conditions for producing Tteokbokki using dry-milling rice flour which can save manpower and labor time. Since the cost of producing rice flour milled in a wet condition is 500 to 700 won/kg, which is more than twice as much as that of 300 won wheat flour, it is necessary to directly make rice flour from raw rice. The dry-milling rice flour used in the experiment was produced by Air mill (Nara machinary co. ltd., Tokyo, Japan) from 5 rice cultivars (Samkwang, Dasan-1, Boramchan, Seolgaeng, Hanareum-2), which were cultivated in A-san in 2015 year. Their particle sizes were 50, 100 and $150{\mu}m$ for each cultivar, respectively. A control was a wet-milled rice flour milled with a roll mill after the rice was soaked in water for 4 hours. The moisture content of dry-milling rice flour based on cultivars was 11 ~ 12%, and added water up to 50~55% of dry-milling rice flour weight. The RVA characteristic of peak viscosity was the highest in Dasan-1 and Hanareum-2, the lowest in Seolgaeng. The setback value used as an indicator of aging was the highest in Dasan-1, therefore Dasan-1 was expected to be quick solidification, resulting in the low tendency of sensory evaluation. The damaged starch was high in Dasan-1 and Boramchan (p<0.05) compared to others. The Hunter color L were no significant among cultivars and b value increased in all cultivars of dry-milling rice flour compared with control. The hardness of dry-milling rice flour was higher than that of the control, especially Dasan-1 and Hanareum-2 were the highest. Based on the sensory evaluation, the best cultivars were Boramchan, Hanareum-2 and Samkwang. The overall preference of dry-milling rice flour was good in particle size of 50~100um.

  • PDF

Efficacy Evaluation of Anti-wrinkle Products in Japan

  • Masaki Hitoshi
    • 대한화장품학회지
    • /
    • 제29권2호
    • /
    • pp.67-77
    • /
    • 2003
  • Two categories of cosmetic products, cosmetics and quasi-drugs, have been established by the Ministry of Health, Labor and Welfare (MHLW) in Japan. Japanese pharmaceutical law has defined that products categorized as cosmetics do not exhibit any effects on human skin. In fact, cosmetic products are not permitted to claim any efficacy. On the other hand, products in the quasi-drug category can claim several efficacies such as anti-inflammatory effects, whitening/lightning effects, hair growth effects and so on. Unfortunately, the Japanese MHLW has not yet approved the efficacy of anti-aging/anti-wrinkle effects as a claim point. However, the population is aging, and the demand for anti-aging/anti-wrinkle products is increasing year by year. Japanese cosmetic companies have proposed to the MHLW that anti-aging/anti-wrinkle agents be approved as a claim concept of a quasi-drug. However, unified evaluation methods for anti-aging/anti-wrinkle effects have not been established. Currently, each company evaluates the efficacy of products/materials using their own original methods. Thus, to request approval of the MHLW, the establishment of a unified evaluation method is needed. Consequently, the Japan Cosmetic Industry Association (JCIA) has established a task force to develop guidelines for evaluating anti-wrinkle effects in 1998. In conclusion, the JCIA would like to adopt visual and image analysis scales to evaluate the anti-wrinkle effects objectively. Generally, wrinkles are roughly classified into three groups as fine wrinkles, linear deep wrinkles and crow's feet. However, academic societies of dermatology or cosmetics have not yet established a definition of wrinkles in Japan. Thus, in advance of setting up an evaluation method, the definition of wrinkles f3r evaluation must be decided. Wrinkles are defined by the task force of the JCIA as follows; furrows that people can recognize visually and that appear on the forehead, the corners of the eyes and the backs of the neck with aging. In addition, furrows are emphasized by exposure to solar light and by dry conditions. Visual evaluation is the most sensitive method and can be applied to most types of wrinkles. However, visual evaluation is hard to express digitally as results. Besides, in the case of image analysis, comparisons of data obtained from distinct examinations can not be done, because data from image analysis are relative values. Thus, to enhance the reliability of the evaluations, the adoption of an objective scale was required. The principle of the evaluation method is to analyze images taken from silicone replicas of wrinkle areas using several parameters, such as the proportion of the wrinkle $area({\%})$, the mean depth of the wrinkles (mm), the mean depth of the deepest wrinkle (m) and the deepest point on the deepest wrinkle. Lights are shown on the skin replica from an orthogonal direction of the main orientation of the wrinkle, and the resulting shadow images are quantified by the image analysis method. To increase the precision of the data or to allow comparisons of independent examinations, a scale with furrows of several depths, 200, 400, 600, 800, and $1000{\mu}m$, is adapted in the evaluation system. I will explain the guidelines established by the JCIA in the presentation.

고질소 Fe-l8Cr-l8Mn-2Mo-0.9N 강의 미끄럼 마멸 기구 (Sliding Wear Mechanism of the High-Nitrogen Austenitic 18Cr-l8Mn-2Mo-0.9N Steel)

  • 김승덕;김성준;김용석
    • 소성∙가공
    • /
    • 제15권2호
    • /
    • pp.112-117
    • /
    • 2006
  • Sliding wear mechanism of a high nitrogen austenitic 18Cr-18Mn-2Mo-0.9N steel has been investigated. Dry sliding wear tests of the steel were carried out at various loads of IN-10N under a constant sliding speed condition of 0.15m/s against AISI 52100 bearing steel balls. Solution ($1050^{\circ}C$) and isothermal aging ($900^{\circ}C$) heat treatments were performed on the steel and the effect of the heat treatments on the wear was investigated. Wear rates of the solution-treated steel specimen remained low until 5N load, and then increased abruptly at loads above 5N. The rates of isothermally aged specimens were low and increased gradually with the applied load. Worn surfaces, their cross sections, and wear debris of the steel specimens were examined with a scanning electron microscopy. Phases of the heat-treated specimen and the wear debris were identified using XRD. The transformed phase underneath a sliding track was investigated and analyzed using a TEM. Effects of the phase transformation during the wear and $Cr_{2}N$ precipitates formed during the isothermal aging on the wear of the austenitic steel were discussed.

고질소 Fe-18Cr-18Mn-2Mo-0.9N강의 미끄럼 마멸 기구 (Sliding wear mechanism of the high-nitrogen austenitic 18Cr-18Mn02Mo-0.9N steel)

  • 김승덕;김성준;김용석
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2005년도 추계학술대회 논문집
    • /
    • pp.105-108
    • /
    • 2005
  • Sliding wear mechanism of a high nitrogen austenitic 18Cr-18Mn-2Mo-0.9N steel has been investigated. Dry sliding wear tests of the steel were carried out at various loads of 1N-10N under a constant sliding speed condition of 0.15m/s against AISI 52100 bearing steel balls. Solution $(1050^{\circ}C)$ and isothermal aging $(900^{\circ}C)$ heat treatments were performed on the steel and the effect of the heat treatments on the wear were investigated. Wear rates of the solution-treated steel specimen remained low until 5N, and then increased abruptly at loads above 5N. The rates of isothermally aged specimens were low and increased gradually with the applied load. Worn surfaces, their cross sections, and wear debris of the steel specimens were examined with a scanning electron microscopy. Phases of the heat-treated specimen and the wear debris were identified using XRD. Phases transformed underneath the sliding track during the wear were investigated and analyzed using TEM. Effects of the phase transformation during the wear and $Cr_2N$ precipitates formed during the isothermal aging on the wear of the austenitic steel were discussed.

  • PDF

Characterization and Evaluation of Freeze-dried Liposomes Loaded with Ascorbyl Palmitate Enabling Anti-aging Therapy of the Skin

  • Lee, Sang-Kil;Lee, Jae-Hwi;Choi, Young-Wook
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권1호
    • /
    • pp.99-102
    • /
    • 2007
  • To prepare freeze-dried ascorbyl palmitate (AsP)-containing liposome which can protect the drug from moisture attack and be used instantly by mixing with water for anti-aging and skin whitening therapy, AsP was encapsulated into liposomes and freeze-dried with trehalose. The freeze-dried liposome formulations were characterized by measuring water contents, particle size, time required for complete reconstitution. With the freeze-dried liposomes, we performed the stability test under accelerated conditions, skin permeation and localization test. The measurement of the time to perfect reconstitution showed that the freeze-dried liposomes can be changed to their initial state rapidly and short term stability test of AsP in reconstituted liposomes under accelerated conditions confirmed that the stability of AsP was considerably enhanced as compared to freshly prepared liposomes. The skin permeation and localization properties of AsP in reconstituted liposomes were not significantly different, indicating that the liposomal structures were maintained before and after freezedrying. In conclusion, the freeze-drying method provided a possible way to overcome the instability issue of AsP induced by the moisture and reproduced similar skin permeation and localization properties as shown by freshly prepared liposomes.