• 한국미생물·생명공학회지
• /
• 제7권2호
• /
• pp.71-74
• /
• 1979

토양과 하수로부터 분리한 Methylomonas metha-nolica YUFE 101의 물리적 배양조건과 회분배양 및 연속배양의 생산성을 조사하여 다음과 같은 결과를 얻었다. (1) 본 실험균주의 최적 배양온도는 32.5$^{\circ}C$ 최적 pH는 6.3부근이다. (2) 비산소 소비속도는 332$\mu$ι/mg-dry wt./hr 이었다. (3) 회분배양에서의 균체수율은 0.47 g-dry cell/g-methanol이었으며, 최대 비증식속도는 0.19 $hr^{-1}$ 이었다. (4) 연속배양에서의 최적희석율은 0.1 $hr^{-1}$이었으며, 이때의 최대 균체생산속도는 0.21 g-dry cell/ι/hr 이었다. 균체수율은 D=0.075$hr^{-1}$ 에서 0.42 g-dry cell/g-methanol 로 최대값을 나타냈다. (5) 건조균체 중의 조단백질 함량은 73%이고 총핵산함량은 12%이었다..

• 한국작물학회지
• /
• 제47권4호
• /
• pp.311-318
• /
• 2002

Planting date of soybeans [Glycine max (L.) Merr.] is one of production components in cultural systems. The objective of the current study was to identify the components of soybean production and cultural practices encompassing planting dates and cultivars that respond to dry matter accumulation, harvest index and yield components. Three determinate soybean cultivars were planted on May 13 (early), June 3 (mid), and June 24 (late). Planting density was 60$\times$15cm with 2 seeds (222,000 plants per ha). Soybean plants were sampled every 10 days interval from the growth stages of V5 to R8 and separated into leaves including petioles, stems, pods, and seeds. Dry matter accumulations, harvest indices, and yield components were measured. Early planting had taken 55 days from VE to R2 and late planting taken 39 days indicating reduced vegetative growth. Early planting showed higher leaf, stem, pod and seed dry weights than late planting. However, late planting appeared to be higher harvest index and harvesting rate. Vegetative mass including leaf and stem increased to a maximum around R4/R5 and total dry weight increased to a maximum around R5/R6 and then declined slightly at R8. The highest seed yield was obtained with mid planting and no difference was found between early and late plantings. Cultivar differences were found among planting dates on growth characteristics and yield components. The results of this experiment indicated that soybean yield in relation to planting dates examined was mainly associated with harvest index and harvesting rate, and planting date of cultivars would be considered soybean plants to reach the growth stage of R4/R5 after mid August for adequate seed yield.

• 한국초지조사료학회지
• /
• 제7권1호
• /
• pp.37-41
• /
• 1987

The purpose of this study is to clarify the effect of top dressing on the thatch losses in bentgrass (Agrostis palustris). Top dressing materials used were clay loam, sand, zeolite, and sawdust. Data were taken on July 10 ($T_1$), Aug. 7 (($T_2$ ) and Sept. 4 (($T_3$) respectively. The results are summarized as follows: 1. The dry weight of accumulated thatch was significantly different between treatments and dates of survery, and for the interaction of treatment x date of survey. 2. The dry weight of accumulated thatch showed a tendency to decrease as growth progressed in all treatments. (Table 1) The dry weight of accumulated thatch was the smallest at sand but the largest at clay loam in each date of survey. 3. The losses rate of accumulated thatch showed a tendency to slightly increase as affected by top dressing materials. (Table 2) Sand showed a significantly higher losses rate of accumulated thatch than that of other treatments. 4. The dry weight of accumulated thatch showed a significant negative correlation (p<0.01) with the losses rate of accumulated thatch. (Fig. 1) 5. Turf coverage was significant difference between treatments and dates of survey. 6. Turf coverage showed a tendency to increase as growth progressed in all treatments. (Table 3) 7. Turf coverage indicated significant negative correlation (p<0.001) with the dry weight of accumulated thatch. (Fig. 2)

• 한국작물학회지
• /
• 제43권1호
• /
• pp.54-58
• /
• 1998

Four introduced forage rape cultivars 'Akela', 'Ramon', 'Sparta', and 'Velox' and a leading rapeseed cultivar Hall-ayuchae were seeded on 1 October 1994 on 20-cm rows at seeding rates of 3, 5, 7, 10, 13, and IS kg/ha to select the best adapted forage rape cultivars and to determine the optimum seeding rate in the Cheju area. Days to flowering of each cultivar was not significantly affected by seeding rate. Average plant height increased from 151 to 164 cm as seeding rate increased from 3 to 10 kg/ha and then decreased to 156 cm at 15 kg/ha. Stem diameter linearly decreased with increasing seeding rate. The optimum seeding rate for the greatest dry matter and protein yields of five cultivars ranged from 10.7 to 11.8 and 10.8 to 14.4 kg/ha, respectively. Dry matter yields of five cultivars ranged from 7.72 and 22.01 Mg/ha. Sparta produced the greatest dry matter yield, followed by Akela, Ramon, Hallayuchae, and Velox. Crude protein yields of five cultivars ranged from 0.29 to 1.08 Mg/ha. Sparta produced the greatest crude protein yield, followed by Akela, Ramon, Velox, and Hallayuchae. As seeding rate increased, crude protein content linearly increased but crude fiber content linearly decreased. The forage cultivars had higher crude protein and lower crude fiber than the oilseed cultivar Hallayuchae. Our results demonstrate that Sparta was the best adapted cultivar to Cheju area and the optimum seeding rate for Sparta was about 10 kg/ha.

• 치과방사선
• /
• 제9권1호
• /
• pp.19-23
• /
• 1979

A study was made primarily to investigate vertical and horizontal distortion of the image at the apical region of the dental roots in orthopantomographs. The subjects consisted of two dry skulls with radiopaque materials attached to root surface. Measuring of the width and length of each predetermined point at 23 teeth was performed in dry skulls and radiographic films. The results obtained were as follows; 1. There was overall magnification of image in the vertical dimension. And anterior portion had greater magnification rate than posterior portion, while lower anterior portion had less magnification rate than upper anterior portion. 2. There was reduction of the image in the horizontal dimension of the teeth, because of the position relation between dry skull and image layer of the orthopantomograph. 3. There was a significant difference in distortion rate between the oposite teeth. 4. Cervical portion of the tooth had more decreased rate of horizontal distortion than apical portion.

• Journal of Ginseng Research
• /
• 제34권3호
• /
• pp.183-191
• /
• 2010

Dry mouth is easily neglected if not associated with oral diseases. Consequently, xerostomatic patients often use unconventional therapies. In traditional Korean medicine, Korean red ginseng (KRG) has long been used to relieve dry mouth. However, no clinical trials have investigated whether KRG actually has an effect on dry mouth. This study was performed to evaluate the efficacy of KRG for dry mouth. We enrolled 100 volunteers with no obvious oral or salivary gland diseases and divided them into KRG and placebo groups. Each group was divided into six subgroups according to age and gender. The subjects received 6 g/day of KRG or placebo for 8 weeks. The dry mouth visual analog scale (VAS), salivary flow rate, and a dry mouth-related symptom questionnaire were evaluated at baseline and at 4 and 8 weeks. KRG treatment did not show any significant differences for any of the variables. However, KRG improved the dry mouth VAS at 4 weeks and dry mouthrelated symptoms at 8 weeks in women, but not in men. Subgroup analyses revealed that KRG markedly improved the dry mouth VAS in women of menopausal age (40 to 59 years) at 4 and 8 weeks. KRG may have beneficial effects for dry mouth in women, especially those of menopausal age, but not in men. Further investigation in post- and perimenopausal women is required to elaborate on these findings.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.282-282
• /
• 1996

The purpose of this study was to prepare the nifedipine dry elixir (NDE) and coated nifedipine dry elixir (CNDE) containing nifedipine ethanol solution for improving the dissolution rate and bioavailability of nifedipine. NDE containing nifedipine and ethanol in wall materials of dextrin was prepared using a spray-dryer and then NDE was coated with eudragit acrylic resin to make CNDE. Shape and size of the NDE and CNDE were monitored by scanning electron micrograph and laser particle size analyzer In vitro dissolution tests were performed in simulated gastric and intestinal fluid. Bioavailability of NDE and CNDE were compared with drug powder suspension and commercial soft capsule after oral administration of the preparations to rats. NDE and CNDE are spherical in shape. Cross-sectional view of dry elixirs indicates the large inter cavity containing ethanolic drug solution in shell. Geometric mean diameter of NDE and CNDE is about 6.64 and 8.70 $\mu\textrm{m}$, respectively. Drug dissolution rate within first 5 min from NDE increased dramatically irrespective of dissolution medium. However, CNDE showed a particularly retarded dissolution rate in pH 1.2 simulated gastric fluid compared with NDE. The bioavailability of nifedipine in the NDE was increased dramatically compared with drug powder suspension. CNDE reduced initial burst-out plasma peak compared with NDE. CNDE as a sustained release delivery system could reduce the initial burst-out plasma peak due to controlling the release rate of nifedipine from NDE and maintain the effective plasma level over a longer period within therapeutic window with enhanced bioavailability of nifedipine.

• Clinical and Experimental Reproductive Medicine
• /
• 제47권4호
• /
• pp.284-292
• /
• 2020

Objective: This study investigated whether adding outer-well medium to inhibit osmotic changes in culture media in a dry-type incubator improved the clinical outcomes of in vitro fertilization-embryo transfer (IVF-ET) cycles. Methods: In culture dishes, the osmotic changes in media (20 µL)-covered oil with or without outer-well medium (humid or dry culture conditions, respectively) were compared after 3 days of incubation in a dry-type incubator. One-step (Origio) and G1/G2 (Vitrolife) media were used. Results: The osmotic changes in the dry culture condition (308 mOsm) were higher than in the humid culture conditions (285-290 mOsm) after 3 days of incubation. In day 3 IVF-ET cycles, although the pregnancy rate did not significantly differ between the dry (46.2%) and humid culture (51.0%) groups, the rates of abortion and ongoing pregnancy were significantly better in the humid culture group (1.5% and 49.5%, respectively) than in the dry culture group (8.3% and 37.8%, respectively, p<0.05). In day 5 IVF-ET cycles, the abortion rate was significantly lower in the humid culture group (2.2%) than in the dry culture group (25.0%, p<0.01), but no statistically significant difference was observed in the rates of clinical and ongoing pregnancy between the dry (50.0% and 25.0%, respectively) and humid culture groups (59.5% and 57.3%, respectively) because of the small number of cycles. Conclusion: Hyperosmotic changes in media occurred in a dry-type incubator by evaporation, although the medium was covered with oil. These osmotic changes were efficiently inhibited by supplementation of outer-well medium, which resulted in improved pregnancy outcomes.

• 한국농림기상학회지
• /
• 제2권4호
• /
• pp.143-147
• /
• 2000

벼 휴립건답직파 절수재배시 적정 파종량을 알아보고자 1997년~1998년까지 2년간에 걸쳐 전북통(미사질양토)에서 동진벼를 공시하여 파종량을 표준인 60kg/ha부터 2kg/ha씩 증파하여 120kg/ha까지 파종하여 시험한 결과를 요약하면 다음과 같다. 1. 벼 재배기간중 강수량은 평 915.8 mm였고 관개용수량은 258.75 mm로 1회 관개마다 34.5 mm를 관개하였다. 2. 입모수는 파종량이 많을수록 많았으나 입모율은 반대 경향이었다. 3. 엽면적지수는 파종량이 많을수록 높았고, 지상부건물중도 파종량이 많을수록 무거웠다. 4. 토양수분장력은 관개를 중단한 1일후에는 -2kPa 이었으나 그 후 계속 낮아져 5일후에는 -30kPa이었다. 5. 파종랑이 많을수록 간장+수장이 길어 도복지수가 높았으나 포장도복은 모두 일어나지 않았다. 6. 출수기는 처리간에 차이가 없었으며, 등숙비율과 현미천립중은 비슷하였고 m$^2$당 립수는 100kg/ha 파종에서 가장 많아 쌀수량은 파종량 100 kg/ha에서 표준(60kg/ha)대비 9% 증수하였으며, 80kg/ha과 120kg/ha에서는 4% 증수 되었다. 따라서 벼 휴립건답직파 절수재배시 적정 파종량은 100 kg/ha이라고 생각된다.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.299-304
• /
• 2004

In recent years, silicon carbide has emerged as an important material for MEMS application. In order to fabricate an SiC film based MEMS structure by using chemical etching method, high operating temperature is required due to high chemical stability Therefore, dry etching using plasma is the best solution. SiC film was deposited by thermal CVD at the temperature of 100$0^{\circ}C$ and pressure of 10 torr. SiC was dry etched with a reactive ion etching (RIE) system, using SF$_{6}$/O$_2$ and CF$_4$/O$_2$ gas mixture. Etch rate has been investigated as a function of oxygen concentration in the gas mixture, rf power, working pressure and gas flow rate. Etch rate was measured by surface profiler and FE-SEM. SF$_{6}$/O$_2$ gas mixture showed higher etch rate than CF$_4$/O$_2$ gas mixture. Maximum etch rate appeared at RF Power of 450W. $O_2$ dilute mixtures resulted in an increasing of etch rate up to 40％, and the superior anisotropic cross section was observe