• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.57-65
• /
• 2008

The atomization phenomena and spray characteristics of drum type rotary atomizer using centrifugal force from high rotational speed of gas turbine engine shaft were studied through rotary atomizer modeling analysis and experimental method. A test rig for rotary atomization that has range of $5,000{\sim}40,000\;rpm$ was used to make similarity for high speed rotating shaft. Spray visualization methodology and Phase Doppler Anemometry were also used to investigate the atomization mechanism and spray characteristics. We found that the rotating fuel spray has unique breakup process and we have to make breakup point earlier through increasing rotating speed to improve atomization performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.6
• /
• pp.776-782
• /
• 2003

This paper describes a newly developed double squirrel cage induction motor in which the rotor is located outside the stator. The outside rotor type brushless dc motor has been used for VTR's head drum and PC's cooling fan, but this kind of induction motor has not been developed yet. The parameters of outside rotor type induction motor were measured from the locked rotor test and no load test. It is possible to determine the parameters which are presented in the steady-state equivalent-circuit of the outside rotor type induction motor. Load test of induction motor was carried out using a dynamometer. For the characteristics of torque, efficiency, power factor and output. the developed double squirrel cage induction motor is compared with the ordinary induction motor It is believed that the results of this paper can be used for the development of the outside rotor type induction motor.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.428-435
• /
• 1994

Properties of modified rice starches prepared in drum drying and extrusion were evaluated to use for effective utilization. Blue value was the lowest (p<0.05) for waxy rice starch and L value was decreased after modification of starches. Water solubility index was the highest for modified starches prepared in extrusion, while water absorption index was the highest for modified starches prepared in drum drying. Cold-Water-Solubility was the highest (p<0.05) for modified rice starch prepared in drum drying (RD). Consistency index of RD was drastically increased as shear rate increased and yield stress was the highest for RD. Results of Gel Permeation Chromatography showed that starch components were broken down into lower molecular weight materials and amylose are degraded by modification. Changes in the X-ray diffrectometry pattern indicated the transformation of granule into an amorphous state during modification and illustrated V-type.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.2
• /
• pp.1-9
• /
• 2008

This paper describes water circulation characteristics of a water/steam receiver at various heat fluxes. The water/steam receiver for a solar tower power system is a natural circulation type. Experimental conditions of water and steam were set at a pressure of 5 bar and temperature of $151.8^{\circ}C$. The experimental device for the water/steam receiver consisted of a steam drum, upper/lower header, riser tubes, and downcomer tube. The experiments were conducted by varying heat fluxes in terms of mass flow rate in each riser tube. However, the total mass flow rate on the riser tubes was fixed at 217.4 g/s. For the uniform heat flux, while the water temperature of the steam drum and upper header were kept at steady state, the temperature of the lower header was fluctuated. For the non-uniform heat flux, while the temperature of the steam drum was kept steady state, the temperature difference increased in the right and left side of the upper header, and the temperature of the lower header was fluctuated.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.4
• /
• pp.49-53
• /
• 2021

The objective of this study was to understand which type of fire hose should be placed in indoor fireplug box upon analyzing the preparation time between rack-type fire hose and reel-type one. With respect to the type of hose, rack-type stacking method was used and hose preparation time was measured with 5 times of repeat test, separating men and women. Study results reveal that preparation time of reel-type fire hose took longer than that of rack-type one in both men and women. For both rack-type hose and reel-type hose, preparation time by two persons took shorter than that by one man. Also, preparation time by three persons took shorted than that by two women. Preparation time for both rack-type hose and reel-type one by men took shorter than that by women. In summary, it was confirmed that rack-type hose could be prepared within shorter time than reel-type one. Since the size of drum set in the reel-type fire hose is relatively small, it had some difficulty in preparation of fire hose timely.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1979.05a
• /
• pp.4.4-5
• /
• 1979

The degree of hearing impairment of chronic otitis media will indicate the nature and severity of middle ear pathology especially condition of ossicular chain, size of ear drum perforation and location of granulation tissue in the middle ear cavity. The subjects were 189 ears of tympanoplasty for chronic otitis media and divided into four groups as follows: Normal ossicular chain with only ear drum perforation (group I), normal ossicular chain with granulation tissue only around the ossicles regardless of any other region (group II), ossicular ankylosis or fixation of handle of malleus to promontory with or without granulation tissue around the ossicle (group III) and ossicular interruption by partial or complete destruction(groupf IV). The results were concluded as follows: 1) The average hearing threshold of chronic otitis media was 44.6 dB and hearing threshold was closely related to the condition of ossicular chain. Hearing threshold became greater in order of normal ossicular chain, ankylosis and interruption. 2) The average hearing threshold of ossicular interrupted group was 49.1 dB and it was greater in the cases of total destruction than that of partial destruction. 3) The hearing loss in the cases of normal ossicular chain with only tympanic membrane perforation was within 45 dB and this level was presumed to represent normal ossicular function. The degree of hearing loss was in proportion to the size of ear drum perforation and when over 45 dB, other middle ear pathology was suggested. 4) In the cases of small ear drum perforation with normal ossicular function, the hearing threshold was within 30 dB. 5) In the type of audiogram, flat type was 30.2% and ascending type 35.4%. Descending type was more frequent in the cases of normal ossicular mobility with granulation tissue around the ossicle and flat type was observed frequently in the cases of ossicular ankylosis. 6) Carhart's notch was seen in 14 cases (7.4%) and observed mainly in ossicular ankylosis. 7) There was no relation between hearing threshold and histopathological type of granulation tissue in chronic otitis media. However the degree of hearing impairment was related to the location of granulation tissue in the middle ear cavity. 8) Authors recognized the granulation tissue compensated the function of interrupted ossicular chain.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1371-1375
• /
• 2005

The paper has analyzed the influence of tire design variable on the tire Force and Moment (F&M) characteristics, especially by the belt angle, the Plysteer Residual Aligning Torque (PRAT) which is considered as one of the causing factors for the vehicle pull. To validate the tire FE model, the tire stiffness and the PRAT which can be derived from the simulation data have been compared with the experimental data of test machine. In addition to PRAT characteristic, the tire stiffness and cornering characteristics due to the belt angle have been investigated. The effects of drum's curvature on the PRAT have been also investigated using the tire FE model and the usefulness of the current drum type F&M test machine can be confirmed.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2931-2934
• /
• 2003

This paper has been studied the electronic ballast by the self-oscillated inverter. The self-oscillated ballast can reduce the stress of the switch of the inverter. But the self-oscillating method is not easy to analyze and design. There arc three kinds of cores for the oscillating transformer： Ring core, EI-core, and Drum core. In this paper, we are studied the characteristics of three kinds of cores in using electronic ballast by the self-oscillated inverter.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.295-296
• /
• 2008

• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.364-371
• /
• 1995

100MW급 유류 연소 드럼형 열병합발전소의 주증기온도와 드럼수위 제어를 위한 비선형 PMBC를 개발하고 그 성능을 PID 알고리즘과 비교하였다. "first principle" approach를 사용하여 개발된 프로세스 모델은 정상상태를 과도상태에서 그 정확도를 현장의 데이터와 비교 검증한 것으로 제어기 성능 평가와 설계에 적합한 정교한 것이다. PMBC와 PID 제어의 성능을 부하증가와 연료의 열량변화 등의 외란에 비교한 결과, PMBC가 PID에 비하여 속응성, 절대오차 적분차, 제어노력 등에서 월등하게 우수한 것을 확인하였다. 것을 확인하였다.