• 한국소음진동공학회논문집
• /
• 제24권2호
• /
• pp.117-122
• /
• 2014

A novel method to reduce the vibration of drum type washing machine is proposed. Recently, as the capacity of the drum-type washing machine gets expanded and its washing performance is improved, its market share is increasing in the whole world. But, the capacity of washing machine is limited because of door size and built-in washing machine size. The vibration of washing machine is caused by unbalanced cloths in high spining drum, and the displacement of tub is maximized at transient range about 3 Hz(180 rpm). Previous researches were concerned about steady-state vibration in spinning. In this study, concerned about transient vibration and the displacement of tub is decreased by using gyroscope system. Mutibody dynamic model of washing machine include gyroscope is designed and the vibration of tub have been reduced by 44.7 % over original.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1134-1139
• /
• 2003

Vibration problems are an intrinsic characteristic in a washing machine owing to rotation working mechanism. Therefore, a right comprehension of working principle and the analysis on dynamic behavior of a washing machine is essential to design anti-vibration or vibration reduction. In this paper, we choose two kinds of a washing machine: a suspension type pulsator/drum type washing machine. Each the structure and working principle of a washing machine is discussed briefly and the dynamic behavior of it is investigated, then, the vibration detection problems of transient or excessive vibration is tented in each category. Some vibration experimented results in a washing machine are presented also.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1311-1314
• /
• 2005

Recently drum washing machines are required to improve not only functions, but also endurance security. The spider is one of the major parts in a drum washing machine as a power transmission device. It is needed estimating for fatigue life because it rotates at high velocity when the drum washing machine works. In this study, we tried to estimate fatigue life of the Spider with CAE and verified the accuracy by comparing the CAE results with the experimental results. The estimation method of fatigue life for the spider with CAE will be applied to raise the efficiency of time and money in the design process of a new drum washing machine.

• 한국지역사회생활과학회지
• /
• 제24권2호
• /
• pp.187-194
• /
• 2013

The purpose of this study was to define the optimal boxthorn berries washing method for developing the boxthorn berries cleaner. We analyzed the rate of removal of residual pesticides according to washing methods; 1st - habitual washing method, 2nd - drum rotation washing method, 3th - drum rotation and air bubble washing method, 4th - drum rotation and nozzle spray washing method, 5th - drum rotation and air bubble and nozzle spray washing method. A rate of removal of residual pesticides of 88% was detected in the drum rotation and air bubble and nozzle spray washing method, and a rate of 82% was detected in the habitual washing method. The drum rotation and air bubble and nozzle spray washing method appeared to be the best good washing effect compared to the habitual washing method(about 6% compared to 82.0% higher). Clothianidin Triadimefon, Triforine ingredients, the drum rotation and air bubble and nozzle spray washing method efficiency was lower compared to the habitual washing method removal efficiency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.313-318
• /
• 2003

The vibration of washing machine at spinning cycle is important problem that affects the performance of a product. In this raper, the inner structure of the washing machine is modeled as a rigid body suspension system and transfer farce caused by rotating unbalance mass is obtained using Newton's the 2nd law. and this model is used to predict the verge of walking instability during the spinning cycle. The walk of the drum washing machine is suggested by calculating the force transmissibility between drum and the cabinet. As calculating the resultant force exerted for cabinet, the friction coefficient of the pad is suggested to avoid the walk. In addition, relation between translational slip and rotational slip is derived and method to avoid the rotational slip is introduced.

• 한국생산제조학회지
• /
• 제25권1호
• /
• pp.54-61
• /
• 2016

Washing machine manufacturers typically advise consumers to maintain the relative humidity in the drum less than 80% for three days after the termination of a washing cycle in order to prevent bacteria proliferation. A vent installed in the back of a washing machine is used to release moisture to satisfy this condition. Up to now, the design and installation of the vent have been based on experiments without understanding its roles and physical phenomena. In this study, various CFD results are presented in order to explain the physical mechanism of moisture release in a washing machine. Two methods of moisture release (diffusion and convection) were studied; diffusion was found to be the dominant process in removing moisture. Experiments were also performed to validate this behavior. In addition, this study will aid in the efficient design of vents to keep the relative humidity low inside the drum.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.271-273
• /
• 2009

Because few signals are generated using low resolution position sensor at low speed, rotor position estimation is difficult in drum washing machine application. Besides, inertia of water and drum affect the initial operation load up to two times of rated load. Therefore overcurrent can be occurred at initial operation. In this paper, IPMSM vector control for drum washing machine is proposed by applying I/F initial operating method and sensorless control. And we verify the performance through experiment.

• 전력전자학회논문지
• /
• 제12권6호
• /
• pp.491-499
• /
• 2007

전동기 구동에 있어서 부하 특성의 변화는 가장 중요하게 고려해야 할 것 중 하나이다. 일반적으로 부하의 변동은 전동기에 흐르는 전류의 크기를 변화시키므로 그 변동의 크기에 따라 적절한 드라이브를 설계해야 할 필요가 있다. 하지만 물의 흐름과 역방향 부하토크 때문에 드럼 세탁기의 부하 변동은 불규칙하며 크다. 이러한 부하 패턴을 고려한 드럼 세탁기의 구동 드라이브를 설계하기 위하여 세탁기 부하의 변동을 물리적 해석을 통해서 모델링 하고자 한다.

• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1034-1042
• /
• 2009

In this paper, the magic formula model was applied for a friction damper in a drum-type washing machine. To describe characteristics of the hysteretic damping force, Physical tests were first carried out to get experimental results using an MTS machine. Then, parameters for the magic formula model were determined from the experimental curves. The ADAMS and MATLAB programs were used for the multibody modeling of the damper and process for parameter identification. The model of drum-type washing machine was applied for a dynamic model of friction damper, in which the accuracy of the proposed damper model was verified.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.561-564
• /
• 2005

The quality of a rotating body such as a washing machine depends on the vibration characteristics. So, the researches to reduce the vibration of a washing machine are actively performing, but it is very difficult to conduct these experiments because there are many design parameters affecting the vibration behavior. Accordingly, in this study it was complete to build a modeling of a drum washing mashing to analyze and predict vibration behaviors. The design parameters which affect the vibration were found, and the method for the systematic analysis of the design parameters was suggested using axiomatic design. In the previous study, the effect of the gasket has not considered on vibration behaviors, but in this study it was considered. The simulation results showed good agreements with the experimental results in the vibration displacement and the vibration tendency of a drum washing machine.