• Journal of Oriental Physiology
• /
• v.14 no.2 s.20
• /
• pp.215-224
• /
• 1999

After Triton WR-1339 (TX; 600mg/kg) intraperitoneal injection, hepatic tissues of ICR mice were intragastric injected with Hyulboochucketang extract(HCE; 3.3ml/kg/day) were observed to investigate the suppressive effect of lipid accumulation that evoke by the antihyperlipidemic effect of HCE. These hepatic tissues were fixed in fromol-calcium solution and were cryocut. These tissues stained by H&E for general morphology, sudan black B for lipid and perchloric acid-naphthoquinone(PAN) method for cholesterol. After TX treatment, the increase of hepatocyte having meshlike cytoplasm(HHMC) were shown in all hepatic lobules and the hepatic plates were disappeared in the aggregative region of HHMC. The number of blue black colored lipid drop and dark green colored asterisk shaped cholesterol particle in hepatic cytoplasm were increased and the size of lipid drop and cholesterol particle were enlarged. But, in HCE-treated mice, the HHCM were disappeared and hapatic plate were rearranged. The number of lipid drop and cholesterol particle were decreased than TX-treated mice and the size of lipid drop and cholesterol particle were diminished. As results indicated that the HCE work on the suppression of lipid accumulation in hepatic tissue of hyperlipidemic mice caused by disturbance of lipid metabolism.

• Nuclear Engineering and Technology
• /
• v.41 no.9
• /
• pp.1215-1222
• /
• 2009

The present work pertains to a research program to study Molten Fuel-Coolant Interactions (MFCI), which may occur in a nuclear power plant during a hypothetical severe accident. Dynamics of the hot liquid (melt) droplet and the volatile liquid (coolant) were investigated in the MISTEE (Micro-Interactions in Steam Explosion Experiments) facility by performing well-controlled, externally triggered, single-droplet experiments, using a high-speed visualization system with synchronized digital cinematography and continuous X-ray radiography. The current study is concerned with the MISTEE-NCG test campaign, in which a considerable amount of non-condensable gases (NCG) are present in the film that enfolds the molten droplet. The SHARP images for the MISTEE-NCG tests were analyzed and special attention was given to the morphology (aspect ratio) and dynamics of the air/ vapor bubble, as well as the melt drop preconditioning. Energetics of the vapor explosion (conversion ratio) were also evaluated. The MISTEE-NCG tests showed two main aspects when compared to the MISTEE test series (without entrapped air). First, analysis showed that the melt preconditioning still strongly depends on the coolant subcooling. Second, in respect to the energetics, the tests consistently showed a reduced conversion ratio compared to that of the MISTEE test series.

• Korean Journal of Materials Research
• /
• v.18 no.5
• /
• pp.259-265
• /
• 2008

The corrosion and degradation factors of a current collector in a molten carbonate fuel cell (MCFC) were investigated to determine the optimized coating thickness of nickel on STS316L. The results show that the surface morphology and electrical properties depended on the nickel coating thickness. The surface morphology gradually changed from a flat to a porous structure along as the nickel coating thickness decreased, and the electrical resistance of the nickel-coated STS316L increased as the nickel coating thickness decreased. This can be attributed to the diffusion of elements of Fe and Cr from the substrate through the nickel grain boundaries. Additionally, carburization in the metal grains or grain boundaries in an anodic environment was found to influence the electrical properties due to matrix distortion. The resistance of Cr-oxide layers formed in an anodic environment causes a drop in the potential, resulting in a decrease in the system efficiency.

• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.173-181
• /
• 2022

Polyvinylidene fluoride (PVDF) flat sheet hydrophobic membranes were prepared using 16 wt% PVDF in Dimethyl acetamide (DMAc) by phase inversion technique for desalination application using Membrane Distillation (MD). In this work, the effect of coagulation mediums such as ethanol and water as well their synergistic behavior on the fabricated PVDF membrane morphology was studied using SEM. Moreover, other characteristics required for the membrane distillation applications namely porosity, hydrophobicity and tensile strength were measured using the gravimetric method, sessile drop method and universal testing machine respectively. It was observed that the membrane morphology paradigm shifted from the finger-like structure to the sponge-like structure on increasing the ethanol concentration in coagulant. The porosity of the fabricated membrane was under the required MD range and found to be 57.3% at 16 weight % of PVDF in DMAc solvent under a pure ethanol coagulant bath. Moreover, the top surface contact angle ranges from 85° to 115° on increasing the bath concentration from CBC 0 to CBC 100 at 16 weight % of PVDF in DMAc solvent.

• The Journal of Dong Guk Oriental Medicine
• /
• v.7 no.2
• /
• pp.97-105
• /
• 1999

Hepatic tissues of ICR mouse were intraperitoneally injeced with Colpomenia bullosa(CB) Extract after Triton WR-1339(TX) injection were observed to investigate the antihyperlipermic effect of CB extract for hyperlipidemic hepatic tissue caused by destruction of lipid metabolism. The hepatic tissues were obtained at hour-24, 48, and 72 after TX injection with CB extract treatment. And then these specimen were fixed in 10% neutral buffer solution and were cryocut. The tissue stained by H&E for general morphology and sudan black B for lipid distribution. The increase of hepatocyte havinig meshlike cytoplasm were shown in all hepatic lobules after TX injection and the hepatic plates were disappeared in the region of meshlike hepatocyte aggregation. But the hepatocyte having meshlike cytoplasm were disappeared and hapatic plate were rearranged in CB extract injected mouse. The number of blue black colored lipid drop in hepatic cytoplasm of mouse injected with TX were increased and the size of lipid drop were enlarged. But the number of lipid drop in hepatic cytoplasm of mouse treated CB extract were decreased and the size of lipid drop were diminished. As results indicated that the accumulation of lipid drop caused by TX injection were mitigated by the antihyperlipidermic effect of CB extract.

• The Korean Journal of Rheology
• /
• v.9 no.2
• /
• pp.81-87
• /
• 1997

비상용성 고분자는 그 계면의 특성에 의해서 복잡한 유변학적 거동을 갖는데 그러 한 거동을 해석하기 위해서 최근에 제안된 구성방정식을 토대로 소폭 진동 전단 흐름장에서 의 유변학적 물성과 몰폴로지 전개를 예측한 바 있다. Takahashi[2]등은 이런 흐름하에서의 계면은 거의 변하지 않음을 보여주었고 따라서 이경우는 상대적으로 쉬운편이었다. 본연구 에서는 정상전단흐름장하에서의 몰폴로지 전개에 대한 구성방정식을 간단한 형태로 표현함 으로써 실제 산업계에서 이용될수 있도록 하였다. 그러한 해석을 통하여 원래의 모델에서 제시되었던 3개의 실험변수를 2개로 줄일수 있었으며 계면의 특성을 잘 나타내 주는 새로운 변수($textsc{k}$)를 도입하였다. 계면의 특성을 잘 나타내 주는 이새로운 변수를 통하여 그 계면의 영향을 예측할수 있었다. 한편 분산상의 파괴, 변형, 합체 메카니즘을 모델에 제시되었던 변 수값들을 통하여 해석하였고 이를 실험적인 데이터와 비교해 보았다.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.113-120
• /
• 1998

Fatigue crack growth rates(i.e. crack initiation and crack growth of short and long crack) are investigated using commercial plates of high strength Al alloy 7075-T651 for the transverse-longitudinal(T-L) direction in air, water and sea water. Also, the evaluation direct current potential drop(D.C.P.D) method and the fractographical analysis by SEM are carried out. Near threshold region, short crack growth rates were much faster than those of comparable long cracks, and these short crack growth rates actually decrease with increasing crack growth and eventually merge with long crack data. Fatigue crack propagation rates in aggressive media(i.e. sea water) increase noticeably over three times those in air. One of the most significant characters in this phenomenon as a corrosion-fatigue causes an acceleration in crack growth rates. Sea water environment, particularly Cl$^{[-10]}$ solution brings the most detrimental effects to aluminum alloy. The result of fractographical morphology in air, water and sea water by SEM shows obvious dimpled rupture and typical striation in air, but transgranular fracture surface in water and sea water.

• Elastomers and Composites
• /
• v.52 no.1
• /
• pp.59-68
• /
• 2017

The effect on the hydrolysis resistance properties by the addition of maleic anhydride grafted EMDM (MA-g-EPDM) and PP (MA-g-PP) to a PA66/GF composite was investigated with respect to the mechanical properties, thermal properties, and morphology. The degree of hydrolysis of the PA66/GF composite was measured using py-GC/MS analysis. When compared to the PA66/GFcomposite in MEG/water solution, the composites where MA-g-EPDM and MA-g-PP were added to PA66/GF showed a higher degree of hydrolysis resistance, impact strength, and thermal properties, whereas their tensile strength, tensile modulus, flexural strength and flexural modulus decreased. As immersion time in the solution increases, the rate of tensile strength drop of the MA-g-PP added composite appeared lower than that of the PA66/MA-g-EPDM/GF and PA66/GF composites. The py-GC/MS analysis confirmed the formation of PA66 hydrolysis reaction by products such as carboxylic acid and alkylamine with increasing immersion time.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.1
• /
• pp.79-87
• /
• 1999

The most part of the faculty drop a trouble and damage of machine equipment even if whatever cause they break out take place at local and trifling place and the factor dominating their trouble is due to wear debris occurred in the lubricated machine moving surface. This study has been car-ried out to identify morphology of wear debris on the lubricated machine moving system by means of computer image analysis. Namely the wear debris contained in lubricating oil extracted from movable machine equipment will be filtered through membrane filter(void diameter 0.45${\mu}m$) and will be analyzed with its data information such as 50% volume diameter aspect roundness and reflectivity. Morphological characteristic of wear debris is easily distinguished by four shape parameters it is necessary to divide small class of every 100 wear debris in total wear particles in order to distinguish morphological characteristic of wear debris more easily by computer image analysis. We are sure that operation condition diagnosis of the lubricated machine moving surfaces is possible by computer image analysis.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.101-104
• /
• 2003

Influences of transverse compressive stress on the critical current ( $I_{c}$) in AgMg and AgMn alloy sheathed Bi-2223 tapes were investigated at 77 K and 0 T. The $I_{c}$ degradation behavior depending on sample specifications was discussed in viewpoints of n-value and damage morphology. As a result, Bi-2223 tapes showed a significant drop in $I_{c}$ for stresses greater than 50MPa. The AgMg sheathed Bi-2223 tapes representing higher $I_{c}$ showed a lower $\sigma$$_{irr}$ and a significant $I_{c}$ degradation with increase in compressive stress. There existed a voltage tap separation dependency of the $I_{c}$ degradation behavior caused by the transverse compressive stress.sive stress.s.