• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.409-422
• /
• 2017

In order to understand the environmental factors affecting the waterbird community in winter, we divided the watershed into 6 sections and investigated the size of the stream, the water quality, benthic invertebrates, and fish including birds. The influences on the community of water birds in Wonju stream were river structure, temperature and water quality. Among the structure of the river, the factors affecting the waterbird community in winter were the width of the stream and the width of the flowing water. The wider the width, the more species and the number of the winter waterbirds were. As the width of river water was wide, the smaller the width and width of the waterway, the fewer the population. The temperature changes of the wintering season affected the community of water birds because it led to freezing of rivers. The sections that were not frozen showed a significant increase and decrease in the temperature drop and rise. The values of pH, water temperature, COD, BOD, TN, TP and total E. coli increased with the increase of the downstream waterbirds population in the water quality survey. The water quality of S6 was affected by the downstream sewage treatment plant The number of wintering waterbirds was also highest. The effluent from the sewage treatment plant seems to have a considerable influence on the water quality. The increase of several items such as TN promotes the nutrition of the river, which leads to the accumulation of organic matter and the proliferation of aquatic organisms. This may be the cause of the increase in winter waterbirds as a food source. The benthic macroinvertebrate communities and fish communities did not show any correlation with the wintering water-birds communities.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.307-319
• /
• 2008

STATEMENT OF PROBLEM: It is known that an anodic oxidation technique, one of the methods for the implant surface treatment, remarkably increased surface area, enhanced wettability and accelerated the initial bone healing. Purpose: This study was performed to evaluate the wettability of anodized titanium surface which has a nanotubular structure, to assess osseointegration after the placement of implant with nano-size tubes on tibia of rats and to analyze quantitatively transferable rhBMP-2 on each surface. MATERIAL AND METHOD: Four different kinds of surface-treated titanium discs (polished (machined surface) group, micro (blasting surface) group, nano (anodizedmachined surface) group, and nano-micro (anodized-blasting surface) group) were fabricated (n=10). Three different media were chosen to measure the surface contact angles; distilled water, plasma and rhBMP-2 solution. After a single drop (0.025 $m{\ell}$) of solution, the picture was taken with the image camera, and contact angle was measured by using image analysis system. For the test of osseointegration, 2 kinds of anodized surface (anodized-machined surface, anodized-blasting surface) implants having 2.0 mm in diameter and 5.0 mm in length inserted into the tibia of Wistar rats. After 3 weeks, tibia were harvested and the specimens were stained with hematoxylin and eosin for histological analysis. To test the possibility of drug delivery, after soaking sample groups in the concentration of 250 ng/$m{\ell}$l of rhBMP-2 for 48 hours, the excess solution of rhBMP-2 were removed. After that, they were lyophilized for 24 hours, and then the rhBMP-2 on the surface of titanium was resolved for 72 hours in PBS. All the extracted solution was analyzed by ELISA. One-way analysis of variance (ANOVA) was performed on the data. RESULTS: The wettability is improved by anodic oxidation. The best wettability was shown on the nano-micro group, and it was followed by nano group, micro group, and polished group. In the histological findings, all implants showed good healing and the new bone formation were observed along the implant surface. After 3 days, nano-micro group delivered the most amount of rhBMP-2, followed by nano group, micro group, and polished group. CONCLUSION: It indicated that anodic oxidation on blasting surface produce functionally graded nano-micro porous structure and enhance hydrophilicity of the surface and osseointegration. The findings suggest that the nano-micro porous structure could be a useful carrier of osteogenic molecules like rhBMP-2.

• The Journal of Korean Physical Therapy
• /
• v.22 no.3
• /
• pp.71-77
• /
• 2010

Purpose: To determine whether upregulation of inducible nitric oxide synthase (iNOS) transcription and translation is related to radicular pain in a model of lumbar disc herniation. Also, to investigate the temporal changes of mRNA expression of iNOS and the identity of iNOS and transient receptor potential vanilloid (TRPV) 1 channel expression cells in dorsal root ganglion (DRG) of a model of lumbar disc herniation. Methods: A lumbar disc herniated rat model was developed by implantation of the autologous nucleus pulposus, harvested from the coccygeal vertebra of each tail, on the left L5 nerve root just proximal to the DRG. Rats were tested for mechanical allodynia of the plantar surface of both hind paws 2 days before surgery and 1, 5, 10, 20 and 30 days postoperatively. Reverse transcription polymerase chain reaction (RT-PCR) was used to follow iNOS mRNA expression. To stain iNOS and TRPV1 in DRG, an immunohistochemical study was done 10 days after surgery. Results: A significant drop in mechanical withdrawal threshold on the ipsilateral and contralateral hind paws was observed 1 day after surgery and was prolonged to 30 days in rats with lumbar disc herniation. The expression of mRNA for iNOS peaked at postoperative day 10 on both sides of the DRG. iNOS-positive sensory neurons in the DRG varied in size from large to small diameter cells. A majority of small and intermediate sensory neurons were TRPV1-positive cells. Double immunofluorescence staining for TRPV1 and iNOS revealed that most intermediate TRPV1-positive sensory neurons co-localized with iNOS-positive neurons. Conclusion: Nucleus pulposus-induced mechanical allodynia can be generated without mechanical compression. This pain is related to temporal changes in expression of iNOS mRNA in the DRG. Co-localization of TRPV1 and iNOS in intermediate neurons of the DRG is correlated with pain modality and intensity.

• Fashion & Textile Research Journal
• /
• v.13 no.4
• /
• pp.600-613
• /
• 2011

The purpose of this study is to provide Torso pattern for Korean middle-aged women using 3D human body scan data. 155 women in their 40's or 50's were measured by Martin's anthropometry. Merging the data of 914 middle aged women provided by Korean agency for technology and standards, total of 1,069 subjects' data were analyzed. For data analysis, ANOVA, factor analysis and cluster analysis were done using SPSS PC+. And representative subject of each cluster was selected and they participated in 3D scanning and Torso pattern suggested for middle-aged women Torso pattern which investing the amount of ease according to each group for diffuse front interscye 30%, armscye circumference 30%, back interscye 40% using 3D human body scan data. The results of this study are as follows. Firstly, as a result of the factor analysis, the first factor was 'obesity index of body', The second factor was 'verticality size of body', The third factor was 'verticality length of upper bodice', The fourth factor was 'drop value to represent silhouette', and the fifth factor was 'physique of upper bodice'. And, middle-aged women type were classified 3 types according to the cluster analysis. Type 1(Y-type) was the long upper Torso with wide shoulder. Type 2(H-type) was flat-body type with comparatively thin upper bodice and thin lower bodice. And type 3(A-type) was the obese type with comparatively thin upper bodice and fat lower bodice. Secondly, using CAD program, point filtering was performed and approximated surface model was made. It used that generated surface smoothing corrected for abnormally extruded points and scattered points based on the curvature information. And 3D surfaces were flatted onto the plane by the internal tools of CAD program. Difference ratios of outline length and area between 3D curves and 2D plane were 0.42% and 0.54%, respectively. Third, wearing test by the sensory evaluation showed that distinct difference almost every category. The movement functionality test shows that, in all the tests which reveal significant differences, especially, 'comparison pattern A' experienced inconvenience to neck width and neck depth.

• Korea journal of population studies
• /
• v.16 no.2
• /
• pp.1-23
• /
• 1993

Korea fertility level has dropped since the 1960's and speed of decline has accelerated in the 1980's. In the resuls, the growth rate reached to less then 1 percent in 1990 and will be $\ulcorner$0 $\lrcorner$ percent growth in 2021. The total population will increase to 50, 586 thousand persons in 2021 then will decrease. With the rapid fertility decline the age structure of Korean population has changed : while the proportion of child population aged 0-14 is decreasing sharply, that of old-age population aged 65 and over is increasing. Because of the recent increase of sex ratio at birth, the sex structure among the young generation has been destorted; the sex ratio at age 0-4 was as high as high as 112.0 in 1990. The effects of these population phenomena on Korean society are the followings: 1) Old age dependency ratio is increasing rapidly and continuously and will be about 40.0 from the 2050's. 2) Because of the rapid decline of the number of births, the absolute number of the major labour force at age 25-34 will decrease after around 2000 and then from the 2010's become less than that in 1990. 3) Since the large fertility defferentials by womens's educational level have continued and the relation between the educational levels of mothers and children are very strong, level has dropped among higher educated women first when the average fertility level has declined in Korea, the average educational level of the children is may be expected to be relatively low and then the future productivity is will be also low, which causes the decline of 'quality of population. 4) When the high sex ratio at birth (over 110 since 1986) continues, number of brides will be short by over 20 percent from the 2010s, which will bring various kinds of social prblems. Therefore, the counter measures in concrete to relieve the heavy problems are recommended as follows: 1) The extention of the birth intervals, which helps to drop the population growth rate at the same level of number of children per women. 2) The positive supports for out-migrants, which helps to reduce the population size without any destortion of age-sex structure. 3) The defferent supports of family planning for the higher and lower classes, which helps to reduce the gaps between different ferility levels of the classes and to keep and improve the quality of population. 4)population education for both students and adults, which helps to minimize the gap between the private and public requirements.

• Atmosphere
• /
• v.24 no.2
• /
• pp.173-188
• /
• 2014

The KMA has cooperated with the Oklahoma University in USA to develop a Polarimetric Radar Data (PRD) simulator to improve the microphysical processes in Korea Local Analysis and Prediction System (KLAPS), which is critical for the utilization of PRD into Numerical Weather Prediction (NWP) field. The simulator is like a tool to convert NWP data into PRD, so it enables us to compare NWP data with PRD directly. The simulator can simulate polarimetric radar variables such as reflectivity (Z), differential reflectivity ($Z_{DR}$), specific differential phase ($K_{DP}$), and cross-correlation coefficient (${\rho}_{hv}$) with input of the Drop Size Distribution (DSD) and scattering calculation of the hydrometeors. However, the simulator is being developed based on the foreign observation data, therefore the PRD simulator development reflecting rainfall characteristics of Korea is needed. This study analyzed a potential application of the 2-Dimension Video Disdrometer (2DVD) data by calculating the raindrop axis ratio according to the rain-types to reflect Korea's rainfall characteristics into scattering module in the simulator. The 2DVD instrument measures the precipitation DSD including the fall velocity and the shape of individual raindrops. We calculated raindrop axis ratio for stratiform, convective and mixed rainfall cases after checking the accuracy of 2DVD data, which usually represent the scattering characteristics of precipitation. The raindrop axis ratio obtained from 2DVD data are compared with those from foreign database in the simulator. The calculated the dual-polarimetric radar variables from the simulator using the obtained raindrop axis ratio are also compared with in situ dual-polarimetric observation data at Bislsan (BSL). 2DVD observation data show high accuracies in the range of 0.7~4.8% compared with in situ rain gauge data which represents 2DVD data are sufficient for the use to simulator. There are small differences of axis ratio in the diameter below 1~2 mm and above 4~5 mm, which are more obvious for bigger raindrops especially for a strong convective rainfall case. These differences of raindrop axis ratio between domestic and foreign rainfall data base suggest that the potential use of disdrometer observation can develop of a PRD simulated suitable to the Korea precipitation system.

• Resources Recycling
• /
• v.18 no.3
• /
• pp.55-61
• /
• 2009

Dewatering process to remove water from pigment sludge was important in the diverse aspects of the improvement of product quality, curtailment of the drying cost and the transportation. It was difficult to dewater pigment particles with the mechanical forces because the size was fine under $5{\mu}m$. Thermal filter press dewatering equipment composed of squeezing plate and a fixed heating plate was developed to improve the dewaterability of pigment the sludge as supplying the heat from the fixed heating plate to the cake. Several tests that estimate the dewaterability for pigment sludge as with or without squeezing process and the difference of dewatering time was conducted with this equipment. Dewaterability of thermal dewatering under squeezing process was increased about 20% compared with non squeezing process. Under squeezing process, thermal dewatering tests changing dewatering time with 70 and 80 minute were conducted respectively. The water content of cake was more reduced at dewatering time of 80 minute compared with 70 minute, and dewatering velocity was also decreased, which caused the productivity of thermal filter press to drop. It was observed that clogging of filter cloth didn't almost occur because the liquid was discharged from cake layer easily. In this research, it was resulted that the squeezing process and long dewatering time were effective to improve the dewaterability of pigment sludge. So, this thermal filter press equipment was useful for dewatering the fine particle sludge like pigment.

• The KIPS Transactions:PartB
• /
• v.16B no.2
• /
• pp.123-130
• /
• 2009

Motion estimation (ME) plays an important role in digital video compression. But it limits the performance of image quality and encoding speed and is computational demanding part of the encoder. To reduce computational time and maintain the image quality, integer pel and fractional pel ME methods are proposed in this paper. The proposed method for integer pel ME uses a hierarchical search strategy. This strategy method consists of symmetrical cross-X pattern, multi square grid pattern, diamond patterns. These search patterns places search points symmetrically and evenly that can cover the overall search area not to fall into the local minimum and to reduce the computational time. The proposed method for fractional pel uses full search pattern, center biased fractional pel search pattern and the proposed search pattern. According to block sizes, the proposed method for fractional pel decides the search pattern adaptively. Experiment results show that the speedup improvement of the proposed method over Unsymmetrical cross Multi Hexagon grid Search (UMHexagonS) and Full Search (FS) can be up to around $1.2{\sim}5.2$ times faster. Compared to image quality of FS, the proposed method shows an average PSNR drop of 0.01 dB while showing an average PSNR gain of 0.02 dB in comparison to that of UMHexagonS.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.17 no.2
• /
• pp.1-10
• /
• 2018

Due to the sudden drop in the number of students currently, Korea is facing a turning point in the urgent need to revise the school acceptance plan policy. Especially, in the case of the decrease of the number of students, the reckless establishment of a school in a certain area has an adverse effect of further reducing the number of students in the nearby school. The purpose of this study is to provide basic data on the appropriate scale policy through the correlation between the opening school year and the number of enrolled students in 19 out of 1,179 schools. The results of the linear regression analysis are as follows : First, in 19 cities nationwide, 17 cities except Suwon city and Anyang city had a hypothesis that 'the number of new school students is more than the number of existing school students'. Second, not only the results of the analysis of 1,179 schools in Korea, but also the results of regional analysis showed a hypothesis. Third, there are many small schools and oversized schools in the national city. It is necessary to establish an appropriate school policy.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.203-209
• /
• 1998

The cutting oil emulsion microfiltration was carried out on dead-end call and crossflow systems equipped with 0.22 $\mu$m GVHP Millipore and 0.2 m stainless steel Mott microfiltration membranes, respectivdy. The oil drop size in the emulsion was varied from 0.07 to 0.22 $\mu$m. Cake filtration(CFM) and standard pore blocking models(SPBM) were applied to predict the permeation flux. The permeation fluxes of 0.01 vol% oil emulsion followed CFM for dead-end system very well under the condition of 400 rpm and below 100 kPa. The SPBM was, however, suitable for the permeation flux at 400 rpm and above 150 kPa. The oil layer on the membrane surface was destroyed and reproduced repeatedly as operating pressure was suddenly changed from 60 to 200 kPa, and then returned to 60 kPa. Also, we estimated the critical entry pressure(CEP) which is changed from CFM to SPBM, and CEP for dead-end system was around 100 kPa. The CEP increased from around 100 to 150 kPa for the crossflow system as the oil concentration increased from 0.01 to 0.03 vol% when Reynolds number was 7080.